New products
New products
zł609.00
Delivery date unknown
zł462.10
24h
Available
SX1302 868M LoRaWAN Gateway HAT - expansion board with LoRaWAN and GNSS module for Raspberry Pi
ID: 1181403
5906623426867
zł544.07
Tax included
zł442.33 tax excl.
Expansion board with LoRaWAN SX1302 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1302 868M LoRaWAN Gateway HAT
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
HAT module with LoRa and GNSS communication dedicated to the Raspberry Pi. The board is equipped with a 40-pin connector allowing for connection with a minicomputer, a Mini-PCIe connector, two SMA antenna connectors and a GNSS L76B module, which allows you to receive data from the main positioning systems: GPS, BDS and QZSS. A board with the LoRa SX1302 module is plugged into the Mini-PCIe connector, which offers long-range transmission with concurrent communication and the FEC (Forward Error Correction) algorithm.
| 1. SX1302 868M LoRaWAN Gateway | 6. Raspberry Pi HAT 40-pin connector |
| 2. Mini-PCIe | 7. GPS antenna connector |
| 3. L76B | 8. LoRa antenna connector |
| 4. RT9193-33 | 9. ML1220 battery socket |
| 5. LED indicators |
The LoRa module uses the SPI or I2C interface, while GNSS communicates via the UART interface. The HAT is powered with 5V via a 40-pin connector. The kit includes the 868M antenna, GPS and necessary cables. Full documentation with the C library is available on the product page.
Features
- LoRa SX1302 module
- Frequency band: EU868 (863-870MHz)
- Modulation: LoRa/(G)FSK
- Transmit power:> 26 dBm @ 5V
- Receiving sensitivity: -141dBm @ 125KHz/SF12, -121dBm @ 125KHz/SF5
- Interface: SPI, I2C
- Connector: Mini-PCIe
- Dimensions: 50.95 x 30 mm
- L76B GNSS module
- Frequency band: GPS L1 (1575.42MHz), BD2 B1 (1561.098MHz)
- Positioning accuracy: <2.5m CEP
- Receiving sensitivity: -148dBm (acquisition), -163dBm (tracking), -160dBm (response)
- Interface: UART
- Power supply: 5V
- Power consumption:
- transmit: 710mA @ 5V GPS on
- reception: 99mA @ 5V GPS enabled
- sleep: 41mA @ 5V GPS off
- Working temperature: -40 to 85 ?
- Dimensions: 65 x 56.5 mm
Kit contains
- SX1302 LoRaWAN Gateway HAT
- SX1302 868M LoRaWAN Gateway (B)
- 868M 5dBi antenna
- GPS antenna
- 2x20-pin female connector
- Dual IPEX1 cable
- A set of screws
1181403
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł172.90
24h
Available quantity: 104
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł215.00
24h
Available quantity: 245
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł265.90
24h
Available quantity: 4
Available
Expansion board with LoRaWAN SX1303 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1303 868M LoRaWAN Gateway HAT
zł479.63
Delivery date unknown
No product available!
LoRaWAN SX1303 module is equipped with a Mini-PCIe connector. It uses the SPI or I2C interface for communication. Waveshare SX1303 868M LoRaWAN Gateway (B)
zł581.15
Delivery date unknown
No product available!
The LoRaWAN SX1302 module is equipped with a Mini-PCIe connector. It uses the SPI or I2C interface for communication. Waveshare SX1302 868M LoRaWAN Gateway (B)
zł545.16
Delivery date unknown
No product available!
Other products in the same category (16)
NFC reader module dedicated to the Raspberry Pi. It is based on the PN532 operating in the 13.56 MHz frequency range. Waveshare PN532 NFC HAT
zł96.42
4 weeks
No product available!
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
zł49.90
24h
Available quantity: 161
Available
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare SX1262 868/915M LoRaWAN HAT
zł71.59
24h
Available quantity: 3
Available
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1262 433/470M LoRaWAN HAT
zł76.95
24h
Available quantity: 2
Available
4-port HUB module with USB 2.0 interface. Designed for Raspberry Pi Zero. Case included. Waveshare USB-HUB-BOX
zł46.22
24h
Available quantity: 5
Available
The set with the RM500Q-GL module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL 5G HAT (EU)
zł1,820.26
4 weeks
No product available!
HAT module designed for the Raspberry Pi minicomputer. It allows you to add an RS485 interface and a CAN bus to the project, allowing for wired communication of many devices over long distances. SB Components 21444
zł102.90
24h
Available quantity: 2
Available
Module dedicated to Raspberry Pi, which supports various wireless communication modes, such as LTE-TDD, LTE-FDD, GSM, GPRS and EDGE. With download speeds of up to 10Mbps and upload speeds of up to 5Mbps, this module is perfect for IoT applications such as remote information processing, device monitoring, POS terminals, industrial routers, remote diagnostics and satellite positioning. Waveshare A7670E Cat-1/GNSS HAT
zł140.87
24h
Available quantity: 4
Available
3-port HUB module with USB 2.0 interface with RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Case included. Waveshare PoE-ETH-USB-HUB-BOX
zł123.90
24h
Available quantity: 2
Available
The set with the RM502Q-AE module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM502Q-AE 5G HAT (EU)
zł2,086.85
4 weeks
No product available!
Adapter in the form of a HAT+ cover for Raspberry Pi 5 enabling the connection of drives, AI accelerators and other modules in the M.2 standard with an M key. The board supports drives in the 2230 and 2242 format and provides transfer speeds of up to 500 MB/s. Raspberry Pi SC1166
zł58.90
24h
Available quantity: 248
Available
Seeed studio LoRa / GPS HAT is an extension designed for Raspberry Pi 2 minicomputers (model B) and Raspberry Pi 3. It has a LoRa communication module (868 MHz) and a GPS module. Seeed Studio 113990254
zł184.73
6 weeks
No product available!
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT
zł117.43
24h
Available quantity: 4
Available
Expansion board with LoRa E22-900T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. SB Components 22571
zł159.90
24h
Available quantity: 3
Available
4-port HUB module with USB 2.0 interface designed to work with the Raspberry Pi minicomputer. Waveshare USB HUB HAT (B)
zł30.31
24h
Available quantity: 10
Available
Radio module with the RFM69HCW (868 MHz or 915 MHz) system, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4072
zł110.65
24h
Available quantity: 2
Available
Expansion board with LoRaWAN SX1302 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1302 868M LoRaWAN Gateway HAT