Board with NB-IoT SIM7020E HAT Module for Raspberry Pi - Waveshare 15936
ID: 574488
5902186317390
zł82.80
Tax included
zł67.32 tax excl.
Board with the NB-IoT SIM7020E module for the Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7020E-NB-IoT HAT
Description
Board with the NB-IoT SIM7020E module designed to work with the Raspberry Pi. Supports multiple NB-IoT frequency bands, can be controlled by AT serial commands, and supports communication protocols such as HTTP, MQTT, LWM2M, COAP etc. Due to its low latency, low power consumption and long range, it is an ideal choice for applications IoT. The module is supplied with the voltage of 5 V. It is equipped with an antenna connector, nano SIM card slot and two signaling LEDs. Communication takes place via the UART interface. Full documentation with examples is available on the product wiki page.
Features
- Frequency band FDD-LTE B1 / B3 / B5 / B8 / B20 / B28
- Data transfer rate 26.15 kbps (download), 62.5 kbps (upload)
- UART communication interface
- Baud rate 300bps to 921600bps (default 115200bps)
- Communication protocol LWM2M / COAP / MQTT / TCP / UDP / HTTP / HTTPS
- Battery voltage 5V
- Logic level 3.3 / 5 V.
- Current consumption in idle mode: 5.6 mA
- Sleep mode: 0.4 mA
- PSM mode: 5 uA
- Dimensions 30.5 x 65 mm
Kit contains
- SIM7020E-NB-IoT HAT
- Antenna
- MicroUSB cable
- A set of screws
574488
Data sheet
- Compatible with
- Raspberry Pi
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł162.90
24h
Available quantity: 130
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł249.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł338.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł525.00
Delivery date unknown
No product available!
Other products in the same category (16)
Expansion board with LoRa E22-900T22S module for Raspberry Pi. Allows communication in the 868 MHz frequency band. Waveshare SX1262 868M LoRa HAT
zł130.08
24h
Available quantity: 4
Available
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1268 433M LoRa HAT
zł95.96
4 weeks
No product available!
A two-channel RS485 expansion module designed for the Raspberry Pi. It uses the TP75176E transceiver and CH432T chip and offers a stable connection between devices. DFRobot DFR0824
zł131.28
24h
Available quantity: 3
Available
The EM060K-GL LTE Cat-6 module kit is designed for use with the Raspberry Pi minicomputer. It supports communication over the high-speed LTE-A network and GNSS positioning. Waveshare EM060K-GL LTE Cat-6 HAT
zł455.69
4 weeks
No product available!
The Quectel 5G RM520N-GL module kit is designed for use with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare RM520N-GL 5G HAT (with case) (EU)
zł1,203.47
4 weeks
No product available!
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
zł105.24
24h
Available quantity: 8
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT
zł106.85
24h
Available quantity: 5
Available
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1262 433/470M LoRaWAN HAT
zł68.25
24h
Available quantity: 3
Available
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare SX1262 868/915M LoRaWAN HAT
zł68.27
4 weeks
No product available!
HAT module designed for the Raspberry Pi minicomputer. It allows you to add an RS485 interface and a CAN bus to the project, allowing for wired communication of many devices over long distances. SB Components 21444
Regular pricezł102.90zł89.90
24h
Available quantity: 1
Available
The KAmodRPi UART RS485 ISO is an advanced RS485 bus transceiver for the Raspberry Pi, featuring automatic transmission direction control, galvanic isolation, surge protection, and support for up to 128 modules at a transmission speed of up to 500 kbps, powered by 5V with low power consumption
zł67.70
24h
Available quantity: 148
Available
Board with the NB-IoT SIM7028 module intended for Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7028-NB-IoT HAT (EN)
zł85.47
24h
Available quantity: 1
Available
BTT U2C V2.1 is a versatile CAN Bus adapter, ideal for integration with Raspberry Pi. With ESD protection, a durable PCB surface, and support for firmware updates, it is a reliable solution for stable communication in 3D printing projects. BIGTREETECH U2C V2.1
zł56.63
24h
Available quantity: 17
Available
The KAmodRPi5 PCIe-M.2 adapter allows you to easily connect an NVME SSD to a Raspberry Pi 5 computer, ensuring universal installation, communication via the PCI Express interface, stable power supply voltage and LED indicators, while maintaining compatibility with HAT modules and official cooling
zł57.90
24h
Available quantity: 127
Available
PCIe to M.2 adapter that allows you to connect M.2 NVMe SSD drives to Raspberry Pi 5 minicomputers. It works with M.2 SSD drives of sizes 2230/2242 and connects to the minicomputer via a 16-pin PCIe ribbon. Waveshare PCIe TO M.2 HAT+
zł29.93
24h
Available quantity: 12
Available
UART debugger module designed specifically for Raspberry Pi 5. Allows easy connection to UART debug connector via SH1.0 3PIN cable, ensuring convenient and effective debugging. Waveshare Pi UART Debugger
zł14.72
24h
Available quantity: 1
Available
Board with the NB-IoT SIM7020E module for the Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7020E-NB-IoT HAT