SIM8202G-M2 5G HAT (B) for Raspberry Pi - Waveshare 21708
ID: 1178850
5902186317383
zł2,909.42
Tax included
zł2,365.38 tax excl.
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)
Description
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It is based on the Qualcomm Snapdragon X55 chip, which guarantees multi-range frequency support, so that the device can be used in countries and regions such as China, Japan, South Korea, Europe or the Middle East. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. SIM8202G-M2 supports positioning within GPS, GLONASS, Beidou, Galileo and QZSS systems, Dial-up function and communication with devices in the cloud. It is supported by AT commands.
The base board is equipped with an M2 B Key connector, thanks to which it enables connection with various 4G or 5G communication modules with an M2 connector. The board also has a USB 3.1 port, an audio jack, a decoder and a SIM card slot. The set is connected to the Raspberry Pi using a standard 40-pin connector. The set includes a housing, antennas and a cooling fan. Full documentation is available on the product Wiki page.
Features
- SIMCom 5G SIM8202G-M2 modem with Qualcomm SDX55 chip
- Frequency band:
- 5G SA Sub-6G n1, n2, n3, n5, n7, n8, n12, n20, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79
- Sub-6G (NSA) n41, n77, n78, n79
- LTE-FDD B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71
- LTE-TDD B34, B38, B39, B40, B41, B42, B43, B48
- WCDMA B1, B2, B3, B4, B5, B8
- GNSS GPS, GLONASS, Beidou, Galileo and QZSS
- Data transfer rate:
- Sub-6G 4 Gb / s (Download) and 500 Mb / s (Upload)
- LTE 2 Gb / s (download) and 200 Mb / s (upload)
- HSPA 42 Mb / s (download) and 5.76 Mb / s (upload)
- Windows, Linux, Android operating systems
- Communication protocols TCP / IP / IPV4 / IPV6 / Multi-PDP / FTP / FTPS / HTTP / HTTPS / MQTTS / DNS / SSL3.0
- SMS supports MT, MO, CB, Text, PDU
- Firmware Upgrade Supports firmware upgrade via USB port
- 2 x 1.8V / 3.0V SIM slot
- 4 x SMA antenna connector
- On / off switch, LED indicator, reset
- Power supply 5V, 3A
- Module dimensions 85 x 56 mm
Kit contains
- SIM8202G-M2
- M.2 TO 4G/5G HAT
- 4 x External Antenna
- 4 x IPEX Adapter
- USB cable
- USB3.0 adapter
- USB2.0 adapter
- GPS antenna
- 2x20-pin terminal block
- Screw package
- SMA protective caps
1178850
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł162.90
24h
Available quantity: 74
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł276.75
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł393.90
24h
Available quantity: 41
Available
Other products in the same category (16)
PoE M.2 E KEY HAT+ is an add-on board for the Raspberry Pi 5 that enables the connection of M.2 E Key cards with Power over Ethernet (PoE) functionality. Thanks to support for 5 V and 12 V power outputs, dual antenna connectors, and compatibility with popular wireless card standards, the module is well-suited for network projects, IoT applications, and systems requiring stable power supply and high-performance wireless communication.
zł93.96
24h
Available quantity: 2
Available
The dual-channel PCIe adapter for Raspberry Pi 5 enables simultaneous use of two high-speed M.2 NVMe SSDs, significantly increasing the storage capacity and performance of Pi 5-based systems. The module supports booting from SSD and is ideal for data-intensive applications such as NAS, workstations, data logging systems, or server-based solutions.
zł79.70
24h
Available quantity: 1
Available
Module with an RFID reader designed to work with the Raspberry Pi. Equipped with an OLED display and a buzzer. SB Components 20003
zł131.13
24h
Available quantity: 1
Available
3-port HUB module with USB 2.0 interface with RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Case included. Waveshare PoE-ETH-USB-HUB-BOX
zł115.26
24h
Available quantity: 5
Available
HAT module designed for Raspberry Pi minicomputer. Powala adds two RS485 interfaces and one CAN bus to the project. Waveshare RS485 CAN HAT (B)
zł107.03
24h
Available quantity: 4
Available
Adapter in the form of a HAT+ cover for Raspberry Pi 5 enabling the connection of drives, AI accelerators and other modules in the M.2 standard with an M key. The board supports drives in the 2230 and 2242 format and provides transfer speeds of up to 500 MB/s. Raspberry Pi SC1166
zł55.90
24h
Available quantity: 92
Available
PCIe to Ethernet Adapter for Raspberry Pi 5. Extends the functionality of the Raspberry Pi 5 by adding a Gigabit Ethernet port with the high-performance RTL8111H controller. The adapter connects to the Raspberry Pi 5 using a 16-pin PCIe cable. Waveshare PCIe TO Gigabit ETH Board (C)
zł29.50
24h
Available quantity: 9
Available
4G/3G/2G communication module and GNSS positioning. It allows making phone calls, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP support and GPS, BeiDou, Glonass, LBS support. Waveshare SIM7600G-H 4G HAT
zł324.42
4 weeks
No product available!
Expansion board with LoRaWAN SX1303 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1303 868M LoRaWAN Gateway HAT
zł479.63
4 weeks
No product available!
The KAmod RPI 485&CAN Hat module extends the functionality of Raspberry Pi 5 boards (and others with a 3.3 V SPI interface) with two galvanically isolated RS485 interfaces and one CAN 2.0B interface. The RS485 interfaces are based on the SC16IS752 controller, and the CAN interface on the MCP2515 system. The isolated transceivers used (ADM2483 and TJA1052) increase resistance to interference. Communication takes place via two SPI interfaces, and additional power supply options (from RPi or external 8-32 V) and a stabilized 5 V output allow for flexibility in power supply. The module can be mounted on RPi 5, also with an Active Cooler radiator, and can work with other microcontrollers. The maximum transmission speeds are 500 kbps for RS485 and 1 Mbps for CAN
zł102.78
24h
Available quantity: 94
Available
Highly cost-effective multimedia hat compatible with the Raspberry Pi Model B+/2B/3B. Decodes and separates voices from HDMI signal, completely solving the poor quality problem with Raspberry Pi integrated sound card. DFR0450
zł238.80
4 weeks
No product available!
HAT designed for Raspberry Pi minicomputers with a two-channel RS485 converter. Communication is realized via the SPI interface. The overlay uses a standard 40-pin Raspberry Pi connector. Waveshare 2-CH RS485 HAT
zł84.41
24h
Available quantity: 2
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT
zł107.45
24h
Available quantity: 2
Available
Raspberry Pi M.2 HAT+ in compact version enables expansion of the Raspberry Pi 5 with high-speed NVMe drives and other PCIe accessories in M.2 format. The standard version supports 2230 and 2242 formats, while the Compact version supports 2230 format with the option of installation in a dedicated case. The module increases the capabilities of the Raspberry Pi 5 in applications requiring high bandwidth and hardware flexibility. Raspberry SC1771
zł68.90
24h
Available quantity: 181
Available
Expansion board with LoRa E22-900T22S module for Raspberry Pi. Allows communication in the 868 MHz frequency band. Waveshare SX1262 868M LoRa HAT
zł129.83
4 weeks
No product available!
The PCIe TO M.2 HAT+ Acce B kit with a 256 GB SSD expands the functionality of the Raspberry Pi 5 by providing fast data storage and the ability to boot the system from an NVMe drive. With high compatibility, built-in power monitoring, and a compact design, the kit is ideal for server projects, file systems, edge computing applications, and solutions requiring high read/write speeds.
zł201.07
4 weeks
No product available!
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)