A-GSM II Shield - expansion board with GSM/GPRS module for Arduino and Raspberry Pi
ID: 584598
zł204.67
Tax included
zł166.40 tax excl.
Expansion board with GSM/GPRS module designed for Arduino and Raspberry Pi. It uses the Quectel M95 chip, the board has two audio connectors, a microSD slot and a dual SIM slot. A-GSM II Shield
Description
An expansion board with a GSM/GPRS module designed to work with Arduino and Raspberry Pi. It uses the Quectel M95 chip, which allows communication within the 2G standard and provides such functions as sending SMS messages, voice calls, DTMF and data transfer. The board for connection to Arduino and Raspberry Pi uses the UART serial interface. The board has a microSD card slot, SIM cards (dualSIM), a USB micro B connector and two 3.5 mm audio outputs, as well as an integrated PCB antenna. The user also has the option of connecting an external antenna through the popular u.FL socket.
The board is perfect for IoT projects. Full documentation with examples of applications is available on the product page.
Features
- Quectel M95 chip
- Supported standards: GSM / GPRS / DTMF / SMS
- Frequencies: 850/950/1800/1900 MHz
- Built-in PCB antenna
- UART interface: 2.8V to 5V
- The Arduino RESET button was brought out
- SIM card slot (dual SIM)
- MicroSD card slot up to 32 GB
- MiniUSB connector + USB-UART converter
- Jack audio outputs for connecting headphones / speakers (870 mW)
- Jack audio inputs for connecting a microphone
- U.FL connector for external antenna
- The set does not contain connectors for Arduino
- Arduino connector
- Works with Raspberry Pi: 3, 2, B+, A+
- Jumper selection of power source: USB, 5V regulator, Vin voltage
- Three mounting holes with a diameter of 3 mm
- Dimensions: 83 x 54 mm
584598
Data sheet
- Communication
- GSM/GPRS
- Compatible with
- Raspberry Pi 3/2/B+
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB plugs type A and mini-USB type B, cable with a length of 1.8 m
zł9.02
Delivery date unknown
No product available!
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 235
Available
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
zł189.00
Delivery date unknown
No product available!
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
zł179.00
Delivery date unknown
No product available!
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł189.00
24h
Available quantity: 81
Available
Other products in the same category (16)
The Arduino expansion board is dedicated to applications that use NB-IoT communication. Thanks to the GNSS (Global Navigation Satellite System) module, it supports GPS, GLONASS, Galileo, QZSS and BeiDou navigation systems. The module is supplied with the voltage from 7 to 12 V. DFRobot DFR0572
zł260.44
24h
Available quantity: 1
Available
Expansion board with 4G/3G/2G communication module and GNSS positioning. The kit has pins compatible with Arduino and STM32 Nucleo. DFRobot TEL0124
zł468.65
24h
Available quantity: 1
Available
Ethernet board with mini SD card slot based on W5100 controller.
zł35.24
24h
Available quantity: 3
Available
Module with Himax HM-01B0 camera and Ethernet communication dedicated to Arduino Portenta H7 boards. Arduino ASX00021
zł299.00
3 weeks
No product available!
Expansion board based on the Wiznet W5200 Ethernet system. It allows you to easily connect Arduino to an Ethernet network. DFRobot DFR0125
zł63.78
24h
Available quantity: 2
Available
Module with a radio receiver operating at 315 MHz for Arduino. DFRobot TEL0075
zł33.73
24h
Available quantity: 1
Available
Multifunctional expander (shield) for NUCLEO and Arduino equipped with Bluetooth 2.0+EDR (HC-05) interface, MEMS 3DoF LIS35, LED-RGB, joystick and analog STLM20 temperature sensor developed and produced by KAMAMI.
zł99.00
24h
Available quantity: 36
Available
NFC module designed for Arduino. Meets the standards of reader mode, P2P mode and card emulation mode. The board has an integrated RF antenna. NXP OM5578/PN7150ARDM
zł39.90
24h
Available quantity: 29
Available
Connect your Arduino-compatible to the Internet with this WiFi shield that features the FCC-certified ATWINC1500 module from Atmel. Adafruit 3654
zł125.28
24h
Available quantity: 1
Available
Ethernet network module with W5500 chip and PoE (Power over Ethernet) function. It communicates via the SPI interface, it has a built-in TCP/IP stack. DFRobot DFR0850
zł132.67
24h
Available quantity: 2
Available
Expansion board based on the Wiznet W5200 Ethernet chip. It allows you to easily connect the Arduino to the Ethernet network. DFRobot DFR0272
zł93.97
24h
Available quantity: 1
Available
KAmodNFC is an expansion board with M24LR64E-R chip – dynamic tag with 64kb EEPROM memory and dual communication interface (I2C/RF). On board is placed also signalization of energy harvesting function, which is in M24LR64E-R chip embedded.
zł28.91
24h
Available quantity: 208
Available
UART-RS485 converter module. It enables communication of Arduino boards with industrial modules. DFRobot DFR0259
zł48.68
24h
Available quantity: 2
Available
Shield for STM32 series Nucleo, XNucleo and Arduino series for communication via RS485 and CAN interfaces (CAN is only available for Nucleo and XNucleo plates). Shield is based on MAX3485 and SN65HVD230 systems
zł38.92
24h
Available quantity: 13
Available
Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. WRL-13287
zł93.33
3 weeks
No product available!
A USB host module that contains all the digital logic and analog circuitry necessary to implement a USB peripheral or host controller using the SPI interface. SparkFun DEV-21247
zł209.00
3 weeks
No product available!
Expansion board with GSM/GPRS module designed for Arduino and Raspberry Pi. It uses the Quectel M95 chip, the board has two audio connectors, a microSD slot and a dual SIM slot. A-GSM II Shield