3-port USB 2.0 HUB HAT PoE/ETH/USB with RJ45 for Raspberry Pi Zero - Waveshare 19635
ID: 588078
5906623426089
zł93.63
Tax included
zł76.12 tax excl.
3-port HUB module with USB 2.0 interface and RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Waveshare PoE/ETH/USB HUB HAT
Description
USB 2.0 HUB with 3 USB ports and one RJ45 (PoE) port dedicated to work with Raspberry Pi Zero. The board has spring pins (Pogo Pin), which are used to connect the module with the minicomputer.
The module uses the CP2102 and RTL8152B chip. It integrates a PoE circuit that allows the set to be powered via an Ethernet cable. Full documentation is available on the Wiki website.
Features
- 3 x USB 2.0 port, 1.1
- 1 x RJ45 port
- CP2102 and RTL8152B chip
- PoE (Power over Ethernet) function, compatible with the 802.3af standard
- Isolated SMPS
- Pogo Pins dedicated to Pi Zero
- USB micro B connector for other versions of the Raspberry Pi or PCs
- POE power input: 37V to 57V
- Output: 5V 2.5A
- Network standard: PoE compliant with IEEE 802.3af
- Dimensions: 72.8 x 37.5 x 45.8 mm
Kit contains
- A set of PoE/ETH/USB HUB HAT modules
- A set of screws
- Screwdriver
588078
Data sheet
- Compatible with
- Raspberry Pi Zero W
- Interface
- USB 2.0
- Active?
- Yes
- Number of Ports
- 3
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
zł3.21
24h
Available quantity: 24
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
zł4.00
24h
Available quantity: 20
Available
Miniature version of the Raspberry Pi computer equipped with SiP BCM2710A1 - 4x ARM Cortex-A53 1GHz twin with Raspberry Pi 3 and 512 MB of RAM and wireless connectivity WiFi 802.11 b / g / n + Bluetooth 4.2 / BLE
zł77.90
24h
Available quantity: 2107
Available
Ethernet patch cord UTP 5E, 2 m long. Red color, with RJ45 connectors. Lanberg Z22990
zł3.00
24h
Available quantity: 40
Available
Other products in the same category (16)
4 Port USB HUB HAT for Raspberry Pi B+, Raspberry Pi 2 B, Rapsberry Pi 3 B; USB to UART Onboard. Waveshare USB HUB HAT
zł35.36
4 weeks
No product available!
Overlay module for Raspberry Pi with GSM, GPRS, GNSS and Bluetooth
zł124.62
24h
Available quantity: 7
Available
Set with SIMCom 5G SIM8262E-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8262E-M2 5G HAT
zł1,206.14
4 weeks
No product available!
The KAmodRPi UART RS485 ISO is an advanced RS485 bus transceiver for the Raspberry Pi, featuring automatic transmission direction control, galvanic isolation, surge protection, and support for up to 128 modules at a transmission speed of up to 500 kbps, powered by 5V with low power consumption
zł67.70
24h
Available quantity: 156
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT
zł106.85
24h
Available quantity: 6
Available
Expansion board with LoRa E22-900T22S module for Raspberry Pi. Allows communication in the 868 MHz frequency band. Waveshare SX1262 868M LoRa HAT
zł129.83
4 weeks
No product available!
Radio module with the RFM69HCW (868 MHz or 915 MHz) system, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4072
zł110.65
24h
Available quantity: 1
Available
RS485 CAN HAT is an extension designed for the Raspberry Pi mini-computer in the form of a HAT overlay. Adds RS485 and CAN interfaces for the Raspberry Pi plate. Interface signals are derived as screw and goldpin connectors. RS485 CAN HAT
zł43.90
24h
Available quantity: 20
Available
The module from SIM7080G is designed for NB-IoT and Cat-M communications. It also enables the use of GNSS systems for positioning. Waveshare SIM7080G Cat-M/NB-IoT HAT (EN)
zł120.11
4 weeks
No product available!
3-port HUB module with USB 2.0 interface with RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Case included. Waveshare PoE-ETH-USB-HUB-BOX
zł115.26
24h
Available quantity: 5
Available
The 4-port HUB module with USB 3.2 interface is designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB HAT
zł62.03
24h
Available quantity: 1
Available
Expansion board with LoRaWAN SX1303 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1303 868M LoRaWAN Gateway HAT
zł479.63
4 weeks
No product available!
UART debugger module designed specifically for Raspberry Pi 5. Allows easy connection to UART debug connector via SH1.0 3PIN cable, ensuring convenient and effective debugging. Waveshare Pi UART Debugger
zł15.60
24h
Available quantity: 5
Available
The module with the converter USB-UART CP2104 dedicated for minicomputers Raspberry Pi. Adafruit 3589
zł39.53
24h
Available quantity: 1
Available
4-port HUB module with USB 2.0 interface. Designed for Raspberry Pi Zero. Case included. Waveshare USB-HUB-BOX
zł42.78
24h
Available quantity: 4
Available
HAT with 2-channel CAN converter designed for Raspberry Pi minicomputers. The communication was based on the CAN controller MCP2518FD as well as the MCP2562FD transceiver and SPI interface. Waveshare 2-CH CAN FD HAT
zł195.82
4 weeks
No product available!
3-port HUB module with USB 2.0 interface and RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Waveshare PoE/ETH/USB HUB HAT