PCIe to 4x 2.5G Ethernet Board (B) - Ethernet module for Raspberry Pi 5 - Waveshare 33364

LTE CAT-1 HAT communication module with integrated GNSS receiver, based on the SimCom A7670E-FASE modem, designed for Raspberry Pi. Enables data transmission in LTE and GSM networks and precise GPS positioning in IoT and industrial applications. KAmod LTE CAT1-GNSS

Module for Raspberry Pi with two RS485 interfaces, controlled via SPI, featuring galvanic isolation, line protection, and communication support up to 500 kbps

An expansion module based on the SX1302 chip that transforms the Raspberry Pi into a complete LoRaWAN gateway. Equipped with GPS, a real-time clock (RTC), and a cooling fan, it ensures stable and precise operation in IoT applications. It supports the 868 MHz and 915 MHz bands and is compatible with most Raspberry Pi models. Its compact design and support for GPS, GLONASS, and BeiDou systems make it ideal for smart city projects, agriculture, and environmental monitoring. The Elecrow LR1302 868M/915M LoRaWAN Gateway

Dual PCIe 2.0 HAT module for Raspberry Pi 5 supporting NVMe M.2 storage and Hailo8 / Hailo8L AI accelerators. Seeed Studio 103110064

PCIe 3.0 adapter with two M.2 slots designed for Raspberry Pi 5, allowing simultaneous connection of two NVMe SSDs or AI accelerators including Hailo8/8L and Google Coral. The module uses the ASM2806 PCIe switch, supports M.2 2230 / 2242 / 2260 / 2280 devices, and mounts underneath the board while keeping the GPIO header accessible for further expansion. Seeed Studio PCIe3.0 to dual M.2 hat

HAT-type module with a PCIe interface for Raspberry Pi 5, enabling connection of an NVMe M.2 drive or a Hailo8 / Hailo8L AI accelerator. Seeed Studio 103110063

HAT+ module intended for Raspberry Pi 5 enabling power supply via Ethernet in the PoE standard and connection of an M.2 NVMe drive via the PCI Express interface. Waveshare 31536

PCIe TO 2.5G ETH Board (C) designed for Raspberry Pi 5, enabling expansion with a 2.5G Ethernet port. Supports Raspberry Pi OS, operates driver-free, and works in plug and play mode. The RTL8125 controller and PCIe interface ensure straightforward integration and high network throughput. Waveshare PCIe TO 2.5G ETH Board (C)

Multifunctional PCIe to M.2 adapter compatible with Raspberry Pi 5, enabling connection of NVMe M.2 solid state drives and convenient breakout of HDMI ports. Supports dual 4K display outputs, offers two power supply methods, and significantly expands the functionality of Raspberry Pi 5 for desktop and embedded applications. Waveshare Pi5 Connector Adapter (C)

PCIe expansion module for Raspberry Pi 5 with four 2.5G Ethernet RJ45 ports, operating in plug and play mode without driver installation, compatible with Raspberry Pi OS. Waveshare PCIE TO 4-CH 2.5G ETH Board (B)

PCIe expansion module for Raspberry Pi 5 with four Gigabit Ethernet RJ45 ports, operating in plug and play mode without driver installation, compatible with Raspberry Pi OS. Waveshare PCIE TO 4-CH Gigabit ETH Board (B)

PCIe to M.2 NVMe and USB 3.2 Gen1 adapter designed for Raspberry Pi 5 enabling connection of an NVMe SSD while expanding the system with four USB 3.2 ports. The module supports M.2 NVMe drives in 2230, 2242, 2260 and 2280 sizes and allows booting the system directly from the SSD. The HAT+ compliant design uses the Raspberry Pi 5 PCIe interface to provide high-speed storage and additional USB connectivity. Waveshare PCIe TO M.2 USB HAT+

HAT module for Raspberry Pi 5 with PCIe interface for M.2 NVMe drives and PCM5122 audio chip with 3.5 mm jack and RCA output. Supports 2230/2242 SSD and I2S audio without drivers. Waveshare 34170

The module enables micro:bit, Raspberry Pi Pico, RP2040-based boards, and other controllers to connect to Wi-Fi networks and online services. Communication with the host board is handled through UART, while the pre-installed ESP-AT firmware allows network functions to be controlled using AT commands. Cytron GRV-WIFI-8266

The cellular modem adds 2G, 3G, and 4G LTE connectivity to compatible Raspberry Pi computers. The HAT+ form factor, 40-pin connector, USB interface, and cellular modem functions support integration with embedded and communication systems. Teltonika EBD021

The cellular modem adds 3G, 4G, and 5G connectivity to Raspberry Pi 4 Model B and Raspberry Pi 5. The HAT+ form factor, 40-pin GPIO connector, USB data interface, and modem control signals support integration with embedded systems requiring direct cellular network access. Teltonika EBD050