KAmodRPi5 PCIe-M.2 mini - Miniature NVME M.2 M-Key Drive Adapter for Raspberry Pi 5
ID: 1192946
5906623487981
zł35.90
Tax included
zł29.19 tax excl.
KAmod RPi5 M.2 mini allows you to connect NVMe M.2 drives, which allows you to use it as a multimedia center or file server, while maintaining a small size and low power consumption
Description
The Raspberry Pi 5 computer is equipped with a PCI Express interface led out to a custom, miniature FFC connector marked on the board as PCIe. It allows you to connect modern SSDs that support the fast and reliable NVME protocol, and then the Raspberry Pi can become a multimedia center or file server, while maintaining a small size and energy efficiency. This requires the use of the KAmod RPi5 M.2 mini adapter, which allows you to connect an NVME drive with an M.2 M-key connector, in size 2230 or 2242. The module can be mounted in the official Raspberry Pi 5 case after removing the fan and transparent holder.
Features
- The adapter is designed for easy mounting on the Raspberry Pi 5 board
- The connection to the Raspberry Pi 5 computer is via FFC 16/0.5 tape
- Does not block the 40-pin GPIO connector
- Allows you to connect an NVME drive with an M.2 M-key (NGFF M-key) connector
- Communication via the PCI Express Gen2 x1 interface (optionally also Gen3 x1)
- Allows you to mount a 2230 or 2242 drive
- Provides a voltage of 3.3 V and a maximum current of 1 A to power the drive
- LED indicators signaling correct power supply and drive activity
- The design of the adapter does not block the possibility of using a radiator with a fan dedicated to Raspberry Pi 5 - Raspberry Pi Active Cooler
- Dimensions: 32.5x64 mm
Note!
Not every NVME M.2 drive is compatible with the Raspberry Pi 5 computer
Included
- KAmod RPi5 M.2 mini adapter
- FFC 16/0.5 tape
- Mounting kit:
- M2 screw - 4 pcs.
- Spacer - 2 pcs.
- M.2 drive mounting clip
1192946
Data sheet
- Compatible with
- Raspberry Pi 5
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Raspberry Pi 5 - 16GB RAM, 2,4GHz, WiFi DualBand, Bluetooth, PCIe 2.0, 2x CSI/DSI, 2x USB 3.0, 2x...
Minicomputer version 5 with 16GB RAM equipped with two microHDMI ports, 2 USB 3.0 ports and 2 USB 2.0 ports and a USB-C power connector. The processor is a 4-core Broadcom BCM2712 clocked at 2.4GHz. The board also has dual-band WiFi, Bluetooth 5.0 with BLE support, PCI Express 2.0 interface and a real-time clock. This model offers exceptional performance thanks to 16GB RAM, which makes it perfect for advanced applications
zł1,023.86
Delivery date unknown
No product available!
Other products in the same category (16)
The set with the SIMCom 5G module SIM8202G-M2 designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (EU)
zł1,487.92
4 weeks
No product available!
Expansion board with GSM/GPRS module designed for Arduino and Raspberry Pi. It uses the Quectel M95 chip, the board has two audio connectors, a microSD slot and a dual SIM slot. A-GSM II Shield
zł204.67
6 weeks
No product available!
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
zł39.90
24h
Available quantity: 82
Available
4-port HUB module with USB 2.0 interface designed to work with the Raspberry Pi minicomputer. Waveshare USB HUB HAT (B)
zł25.71
4 weeks
No product available!
A 3-port HUB module with a USB 2.0 interface with an RJ45 connector, designed to work with the Raspberry Pi minicomputer. Waveshare ETH/USB HUB HAT (B)
zł45.74
24h
Available quantity: 7
Available
A 3-port HUB module with a USB 3.2 Gen1 interface with an RJ45 connector designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB Gigabit ETH HAT
zł109.88
4 weeks
No product available!
3-port HUB module with USB 2.0 interface and RJ45 connector. Designed for Raspberry Pi Zero. Housing included. Waveshare ETH-USB-HUB-BOX
zł57.60
4 weeks
No product available!
4-port HUB module with USB 2.0 interface. Designed for Raspberry Pi Zero. Case included. Waveshare USB-HUB-BOX
zł42.95
24h
Available quantity: 4
Available
3-port HUB module with USB 2.0 interface with RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Case included. Waveshare PoE-ETH-USB-HUB-BOX
zł114.89
4 weeks
No product available!
3-port HUB module with USB 2.0 interface and RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Waveshare PoE/ETH/USB HUB HAT
zł94.38
4 weeks
No product available!
The module with the converter USB-UART CP2104 dedicated for minicomputers Raspberry Pi. Adafruit 3589
zł39.53
24h
Available quantity: 1
Available
Module with an RFID reader designed to work with the Raspberry Pi. Equipped with an OLED display and a buzzer. SB Components 20003
zł131.13
24h
Available quantity: 1
Available
Module with RS232 and RS485 interface dedicated to Raspberry Pi minicomputer. Communication takes place via the SPI interface. Waveshare RS485 RS232 HAT
zł76.42
4 weeks
No product available!
Set with the SIMCom 4G module SIM7600G-H designed to work with the Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H-M2 4G HAT
zł370.71
4 weeks
No product available!
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)
Regular pricezł2,909.42zł1,275.58
24h
Available quantity: 16
Available
The set with the RM500U-CNV module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks. Waveshare RM500U-CN 5G HAT
zł938.97
4 weeks
No product available!
KAmod RPi5 M.2 mini allows you to connect NVMe M.2 drives, which allows you to use it as a multimedia center or file server, while maintaining a small size and low power consumption