PCIe HAT+ adapter to M.2 E Key for Raspberry Pi 5 - Waveshare 30134

HAT with 2-channel CAN converter designed for Raspberry Pi minicomputers. The communication was based on the CAN controller MCP2518FD as well as the MCP2562FD transceiver and SPI interface. Waveshare 2-CH CAN FD HAT

Expansion board with LoRa E22-900T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. SB Components 22571

The PCIe HAT for 4G/5G modems and USB 3.2 Gen1 enables integration of high-speed cellular connectivity and USB port expansion in Raspberry Pi 5 projects. It supports M.2 Key B standard modems, ensuring compatibility with a wide range of frequencies and SIM card formats. The built-in power monitoring system and HAT+ compliance allow for advanced power management. Ideal for use in industrial routers, IoT gateways, mobile communication systems, and projects requiring fast 4G/5G network access.

3-port HUB module with USB 2.0 interface and RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Waveshare PoE/ETH/USB HUB HAT

UART debugger module designed specifically for Raspberry Pi 5. Allows easy connection to UART debug connector via SH1.0 3PIN cable, ensuring convenient and effective debugging. Waveshare Pi UART Debugger

KAmodRPi-GPRS-GPS is an overlay for Raspberry Pi 4 / 3B + / 3B / 2B / B + computers, which allows you to enrich the system with the ability to send data via GPRS, SMS transmission or work as a module for Bluetooth communication. This extension also offers the ability to receive satellite data from location systems - GPS and GLONASS.

Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)

A 3-port HUB module with a USB 2.0 interface with an RJ45 connector, designed to work with the Raspberry Pi minicomputer. Waveshare ETH/USB HUB HAT (B)

The PCIE TO M.2 E KEY HAT+ Acce A kit enables the expansion of Raspberry Pi 5 with a fast and modern network interface based on the Intel Wireless-AX210 module, supporting Wi-Fi 6E and Bluetooth 5.3. Thanks to the HAT+ standard, two SMA antenna connectors, and the ability to transmit Bluetooth signals via USB, the adapter is suitable for communication projects, home servers, and IoT systems requiring high-performance wireless connectivity.

4-port HUB module with USB 2.0 interface. Designed for Raspberry Pi Zero. Case included. Waveshare USB-HUB-BOX

The dual-channel PCIe adapter for Raspberry Pi 5 enables simultaneous use of two high-speed M.2 NVMe SSDs, significantly increasing the storage capacity and performance of Pi 5-based systems. The module supports booting from SSD and is ideal for data-intensive applications such as NAS, workstations, data logging systems, or server-based solutions.

The HAT module is designed to integrate with the Raspberry Pi, which allows the connection of the LoRaWAN Gateway WM1302 module in mini-PCIe format. Equipped with a LoRaWAN authorization chip and a GPS module, this module creates a complete LoRaWAN communication gateway, ideal for IoT applications such as smart farming and cities. Seeed Studio 113100022

The set with the RM500U-CNV module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks. Waveshare RM500U-CN 5G HAT

GSM/GNSS expansion module dedicated to Raspberry Pi minicomputers. Allows to equip RPi with LTE Cat-1/3G/2G communication and positioning within GPS, BeiDou, Glonass, GALILEO, QZSS navigation systems. Waveshare SIM7600E LTE Cat-1 HAT

The PCIe TO M.2 HAT+ Acce A kit with a 128 GB SSD is a ready-to-use solution that expands the Raspberry Pi 5 with fast NVMe storage, providing enhanced performance and the ability to boot from the drive. With its compact design, power monitoring support, and compatibility with 2230/2242 form factors, the kit is ideal for building home servers, NAS systems, workstations, and projects requiring high data throughput.

Compact 4G LTE HAT for Raspberry Pi, ideal for remote IoT projects operating without Wi-Fi. Includes SIMCom A7683E modem, SIM connector, SMA antenna, user buttons and Qw/ST port for easy expansion. No soldering required and great for mobile or field installations. Pimoroni PIM717