KAmod RPi RS485 X2 - Dual RS485 Interface Module for Raspberry Pi
ID: 1200267
5902186333147
zł79.90
Tax included
zł64.96 tax excl.
Module for Raspberry Pi with two RS485 interfaces, controlled via SPI, featuring galvanic isolation, line protection, and communication support up to 500 kbps
Description
KAmod RPi RS485 X2 allows easy expansion of Raspberry Pi mini computers, including Raspberry Pi 5, with two RS485 interfaces. The interfaces incorporate advanced protection circuits and are galvanically isolated from the control circuitry, ensuring stable operation and resistance to interference and failures. The module is designed to be compatible not only with Raspberry Pi 5 but also with other Raspberry Pi series boards. It is controlled via the SPI interface available on the 40-pin GPIO header of Raspberry Pi and can also be used with other platforms such as Arduino or STM32.
Features
- 2 RS485 interfaces controlled by the SC16IS762 controller (SPI to 2x UART)
- RS485 interfaces equipped with ST485 transceivers
- RS485 interfaces galvanically isolated from control circuits
- Option to connect 120 Ω termination resistors to each RS485 line
- Maximum RS485 communication speed: 500 kbps
- Control via SPI interface operating at 3.3 V
- Automatic control of RS485 transceiver transmission direction
- Power supply: 5 V / 0.2 A drawn from the Raspberry Pi board or from an external source
- Easy mounting on Raspberry Pi 5, including versions with the RPi Active Cooler heatsink
- Module dimensions: 65 x 56 mm, height approx. 15 mm (plus bottom connector with a height of approx. 13 mm)
Kit includes
- 1x Assembled and tested module
- 1x Set of screws and spacers for mounting the module to a Raspberry Pi board
1200267
Data sheet
- Compatible with
- Raspberry Pi
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Module with an RFID reader designed to work with the Raspberry Pi. Equipped with an OLED display and a buzzer. SB Components 20003
zł131.13
24h
Available quantity: 1
Available
Module with RS232 and RS485 interface dedicated to Raspberry Pi minicomputer. Communication takes place via the SPI interface. Waveshare RS485 RS232 HAT
zł76.42
4 weeks
No product available!
Set with the SIMCom 4G module SIM7600G-H designed to work with the Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H-M2 4G HAT
zł376.01
24h
Available quantity: 3
Available
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)
Regular pricezł2,909.42zł1,275.58
24h
Available quantity: 16
Available
The set with the RM500U-CNV module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks. Waveshare RM500U-CN 5G HAT
zł938.97
4 weeks
No product available!
Communication module with the SIM800C system designed for Raspberry Pi minicomputers. Adds support for GSM/GPRS networks. Waveshare SIM800C GSM/GPRS HAT
zł87.76
24h
Available quantity: 2
Available
The set with the RM500Q-GL module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL 5G HAT (with case) (EU)
zł1,861.14
4 weeks
No product available!
The set with the RM500Q-GL module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL 5G HAT (EU)
zł1,820.26
4 weeks
No product available!
Expansion board with LoRaWAN SX1303 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1303 868M LoRaWAN Gateway HAT
zł479.63
4 weeks
No product available!
Expansion board with LoRaWAN SX1302 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1302 868M LoRaWAN Gateway HAT
zł496.18
4 weeks
No product available!
Set with SIMCom 5G SIM8262E-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8262E-M2 5G HAT
zł1,206.14
4 weeks
No product available!
Set with SIMCom 5G SIM8262E-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8262E-M2 5G HAT (with case)
zł1,244.03
24h
Available quantity: 1
Available
HAT module designed for Raspberry Pi minicomputer. Powala adds two RS485 interfaces and one CAN bus to the project. Waveshare RS485 CAN HAT (B)
zł111.92
24h
Available quantity: 7
Available
HAT module designed for Raspberry Pi minicomputer. Powala adds two CAN interfaces to the project. Waveshare 2-CH CAN HAT
zł88.29
24h
Available quantity: 1
Available
The module from SIM7080G is designed for NB-IoT and Cat-M communications. It also enables the use of GNSS systems for positioning. Waveshare SIM7080G Cat-M/NB-IoT HAT (EN)
zł120.11
4 weeks
No product available!
SIMCom 4G SIM7600G-H module kit designed to work with Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H 4G HAT (B)
zł348.52
4 weeks
No product available!
Module for Raspberry Pi with two RS485 interfaces, controlled via SPI, featuring galvanic isolation, line protection, and communication support up to 500 kbps