zł269.01
RM500Q-GL 5G/GNSS module kit with enclosure for Raspberry Pi (EU) - Waveshare 22710
ID: 1181052
zł1,861.14
Tax included
zł1,513.12 tax excl.
The set with the RM500Q-GL module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL 5G HAT (with case) (EU)
Description
The set with the RM500U-CN module is designed to work with the Raspberry Pi minicomputer. Provides communication in 5G networks with compatibility in 4G and 3G networks and supports GNSS positioning within GPS, GLONASS, BeiDou and Galileo systems.
It communicates via the USB port and has support for Windows, Android and Linux. The base board is equipped with an M2 connector, thanks to which it enables connection with various communication modules with a M2 B Key connector. The board also has a USB port and two SIM card slots. The set is connected to the Raspberry Pi using a standard 40-pin connector. The set includes adapters, antennas and a cooling fan.
It contains also metal case. You can put a minicomputer and communication module in it and build a small router located on a wall or mounting rail.
Full documentation is available on the product Wiki page.
Features
- 5G NR NSA: n41, n77, n78, n79
- 5G NR SA: n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48*, n66, n71, n77, n78, n79
- LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12(B17), B13, B14, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71
- LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48
- LAA: B46
- UMTS WCDMA: B1, B2, B3, B4, B5, B6, B8, B19
- GNSS: GPS, GLONASS, BeiDou, Galileo
- Data transfer rate:
- 5G SA Sub-6: Download 2,1 Gbps; 900 Mbps upload
- 5G NSA Sub-6: Download 2.5 Gbps; sending 600/650 Mb/s
- LTE: download 1 Gb/s; upload 200 Mb/s
- UMTS: download 42 Mbps; sending 5.76Mb/s
- 2 x SIM card slot
- 4 x SMA antenna connector
- ON / OFF switch
- Reset button, LED indicator
- Power supply 5V, 3A
- Module dimensions: 56.7 x 85 mm
Kit contains
- 5G Module
- M.2 TO 4G/5G HAT
- 4 x external antenna
- 4 x IPEX adapter
- USB cable
- USB3.0 adapter
- USB2.0 adapter
- 2x20-pin terminal block
- Screw package
- USB power adapter
- SMA protective caps
- Metal case
- Rail holder
- Mounting brackets
1181052
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The set with the RM500Q-GL module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL 5G HAT (EU)
zł1,820.26
Delivery date unknown
No product available!
Other products in the same category (16)
RS485 CAN HAT is an extension designed for the Raspberry Pi mini-computer in the form of a HAT overlay. Adds RS485 and CAN interfaces for the Raspberry Pi plate. Interface signals are derived as screw and goldpin connectors. RS485 CAN HAT
zł43.90
24h
Available quantity: 32
Available
Radio module with the RFM69HCW (868 MHz or 915 MHz) system, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4072
zł110.65
4 weeks
No product available!
Radio module with RFM69HCW 433 MHz chip, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4073
zł144.14
24h
Available quantity: 2
Available
Board with the NB-IoT SIM7020E module for the Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7020E-NB-IoT HAT
zł82.80
4 weeks
No product available!
HAT designed for Raspberry Pi minicomputers with a two-channel RS232 converter. Communication is realized via the SPI interface. The overlay uses a standard 40-pin Raspberry Pi connector. Waveshare 2-CH RS232 HAT
zł77.86
24h
Available quantity: 2
Available
4G/3G/2G communication module and GNSS positioning. It allows making phone calls, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP support and GPS, BeiDou, Glonass, LBS support. Waveshare SIM7600G-H 4G HAT
zł360.66
24h
Available quantity: 2
Available
HAT designed for Raspberry Pi minicomputers with a two-channel RS485 converter. Communication is realized via the SPI interface. The overlay uses a standard 40-pin Raspberry Pi connector. Waveshare 2-CH RS485 HAT
zł84.41
4 weeks
No product available!
HAT with 2-channel CAN converter designed for Raspberry Pi minicomputers. The communication was based on the CAN controller MCP2518FD as well as the MCP2562FD transceiver and SPI interface. Waveshare 2-CH CAN FD HAT
zł195.82
4 weeks
No product available!
The 4-port HUB module with USB 3.2 interface is designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB HAT
zł61.56
24h
Available quantity: 4
Available
The set with the SIMCom 5G module SIM8202G-M2 designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (EU)
zł1,487.92
4 weeks
No product available!
Expansion board with GSM/GPRS module designed for Arduino and Raspberry Pi. It uses the Quectel M95 chip, the board has two audio connectors, a microSD slot and a dual SIM slot. A-GSM II Shield
zł204.67
6 weeks
No product available!
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
zł39.90
24h
Available quantity: 18
Available
4-port HUB module with USB 2.0 interface designed to work with the Raspberry Pi minicomputer. Waveshare USB HUB HAT (B)
zł25.88
24h
Available quantity: 15
Available
A 3-port HUB module with a USB 2.0 interface with an RJ45 connector, designed to work with the Raspberry Pi minicomputer. Waveshare ETH/USB HUB HAT (B)
zł45.53
4 weeks
No product available!
A 3-port HUB module with a USB 3.2 Gen1 interface with an RJ45 connector designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB Gigabit ETH HAT
zł110.45
4 weeks
No product available!
3-port HUB module with USB 2.0 interface and RJ45 connector. Designed for Raspberry Pi Zero. Housing included. Waveshare ETH-USB-HUB-BOX
zł59.09
24h
Available quantity: 8
Available
The set with the RM500Q-GL module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL 5G HAT (with case) (EU)