RM520N-GL 5G HAT kit with enclosure for Raspberry Pi - Waveshare 24487
ID: 1185265
5906623469611
zł1,251.56
Tax included
zł1,017.53 tax excl.
The Quectel 5G RM520N-GL module kit is designed for use with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare RM520N-GL 5G HAT (with case) (EU)
Description
The Quectel 5G RM520N-GL module kit is designed for use with the Raspberry Pi minicomputer. It guarantees multi-band frequency support, making the device suitable for use in countries and regions such as China, Japan, South Korea, Europe and the Middle East. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. The RM520N-GL supports GPS, GLONASS, Beidou, Galileo and QZSS positioning and communication with cloud-based devices. It is operated using AT commands.
The base board is equipped with an M2 connector, allowing connection to various 4G or 5G communication modules with an M2 connector. The board also features a USB 3.1 port, audio jack, decoder and two SIM card slots. The kit is connected to the Raspberry Pi via a standard 40-pin connector.
| 1. 40-pin GPIO connector | 7. Audio connector |
| 2. Switch | 8. Antenna connector |
| 3. M.2 slot | 9. Reset |
| 4. SIM slot | 10. Power supply switch |
| 5. USB 3.1 | 11. LED indicator |
| 6. USB type C |
| 12. Fun | 15. USB 2.0 pads |
| 13. SIM2 socket | 16. Audio NAU8810X chip |
| 14. Configuration switch | 17. Fun header |
An enclosure, antennas and cooling fan are included. The enclosure has universal mounts that allow the unit to be mounted on a wall or DIN rail. Full documentation is available on the product wiki page.
Features
- Quectel 5G RM520N-GL modem
- 5G standard: 3GPP R16
- Frequency band:
- 5G NR NSA: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79
- 5G NR SA: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79
- LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12(B17), B13, B14, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71
- LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48
- LAA: B46
- UMTS WCDMA: B1, B2, B4, B5, B8, B19
- GNSS: GPS, GLONASS, BeiDou, Galileo
- Data rate:
- 5G SA Sub-6: download 2.4 Gb/s; upload 900 Mb/s
- 5G NSA Sub-6: download 3.4 Gb/s; upload 550 Mb/s
- LTE: download 1.6 Gbps; upload 200 Mbps
- UMTS: Download 42 Mbps; Upload 5.76 Mbps
- 2 x SIM card slot
- Antenna connector: 4x SMA
- ON/OFF switch
- Reset button, LED indicator
- Power supply 5 V, 3 A
- Module dimensions: 56.7 x 85 mm
Kit contains
- RM520N-GL
- Case
- M.2 TO 4G/5G HAT
- 4 x external antenna
- 4 x IPEX adapter
- GNSS antenna
- USB3.0 dual-plug cable
- USB3.0 adapter
- USB2.0 adapter
- 2x20-pin connector
- Screw package
- 4 x SMA protective caps
- 5V 3A USB type C power adapter
1185265
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł166.90
Delivery date unknown
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł257.89
24h
Available quantity: 56
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł481.73
24h
Available quantity: 5
Available
Other products in the same category (16)
BTT U2C V2.1 is a versatile CAN Bus adapter, ideal for integration with Raspberry Pi. With ESD protection, a durable PCB surface, and support for firmware updates, it is a reliable solution for stable communication in 3D printing projects. BIGTREETECH U2C V2.1
zł56.63
24h
Available quantity: 11
Available
The KAmodRPi5 PCIe-M.2 adapter allows you to easily connect an NVME SSD to a Raspberry Pi 5 computer, ensuring universal installation, communication via the PCI Express interface, stable power supply voltage and LED indicators, while maintaining compatibility with HAT modules and official cooling
zł57.90
24h
Available quantity: 125
Available
PCIe to M.2 adapter that allows you to connect M.2 NVMe SSD drives to Raspberry Pi 5 minicomputers. It works with M.2 SSD drives of sizes 2230/2242 and connects to the minicomputer via a 16-pin PCIe ribbon. Waveshare PCIe TO M.2 HAT+
zł29.93
24h
Available quantity: 5
Available
UART debugger module designed specifically for Raspberry Pi 5. Allows easy connection to UART debug connector via SH1.0 3PIN cable, ensuring convenient and effective debugging. Waveshare Pi UART Debugger
zł15.13
24h
Available quantity: 1
Available
Versatile CAN bus interface based on the MCP2518FD controller, enabling communication in CAN 2.0 and CAN FD modes via SPI interface, compatible with SBC computers, including Raspberry Pi 5, with additional security and the ability to support two modules simultaneously
zł69.77
24h
Available quantity: 92
Available
Module dedicated to Raspberry Pi, which supports various wireless communication modes, such as LTE-TDD, LTE-FDD, GSM, GPRS and EDGE. With download speeds of up to 10Mbps and upload speeds of up to 5Mbps, this module is perfect for IoT applications such as remote information processing, device monitoring, POS terminals, industrial routers, remote diagnostics and satellite positioning. Waveshare A7670E Cat-1/GNSS HAT
zł140.69
24h
Available quantity: 9
Available
The HAT module is designed to integrate with the Raspberry Pi, which allows the connection of the LoRaWAN Gateway WM1302 module in mini-PCIe format. Equipped with a LoRaWAN authorization chip and a GPS module, this module creates a complete LoRaWAN communication gateway, ideal for IoT applications such as smart farming and cities. Seeed Studio 113100022
zł110.33
24h
Available quantity: 1
Available
Adapter in the form of a HAT+ cover for Raspberry Pi 5 enabling the connection of drives, AI accelerators and other modules in the M.2 standard with an M key. The board supports drives in the 2230 and 2242 format and provides transfer speeds of up to 500 MB/s. Raspberry Pi SC1166
zł55.90
24h
Available quantity: 30
Available
The PCIe To USB 3.2 Gen1 HAT for Raspberry Pi 5 is a versatile solution that expands the USB capabilities of your Raspberry Pi 5. With easy installation and power monitoring features, it is an ideal choice for projects requiring multiple high-speed USB ports. Additionally, the reserved space for a cooling fan ensures better cooling and stable operation of the device. Waveshare 26847
zł76.16
4 weeks
No product available!
PCIe to Ethernet Adapter for Raspberry Pi 5. Extends the functionality of the Raspberry Pi 5 by adding a Gigabit Ethernet port with the high-performance RTL8111H controller. The adapter connects to the Raspberry Pi 5 using a 16-pin PCIe cable. Waveshare PCIe TO Gigabit ETH Board (C)
zł29.50
24h
Available quantity: 3
Available
HAT module for Raspberry Pi that supports global 4G LTE Cat-1 bands. It has a standard 40-pin GPIO connector, supports multiple communication protocols, including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL. It also offers GNSS positioning functions such as GPS, GLONASS, Galileo, and BeiDou. Waveshare SIM7670G LTE Cat-1/GNSS HAT
zł197.88
24h
Available quantity: 1
Available
NVMe Base is a reliable solution for expanding storage for the Raspberry Pi 5, ideal for users who require fast data access and large storage capacity. With support for multiple NVMe SSD models and compatibility with the Raspberry Pi 5, it is the perfect addition to projects that demand performance and flexibility. Pimoroni PIM699
zł67.71
24h
Available quantity: 12
Available
The KAmodRPi5 PCIe-M.2 adapter allows you to easily connect an NVME SSD to a Raspberry Pi 5 computer, ensuring universal installation, communication via the PCI Express interface, stable power supply voltage and LED indicators, while maintaining compatibility with HAT modules and official cooling
zł57.90
24h
Available quantity: 91
Available
KAmod RPi5 M.2 mini allows you to connect NVMe M.2 drives, which allows you to use it as a multimedia center or file server, while maintaining a small size and low power consumption
zł35.90
24h
Available quantity: 50
Available
Modern SSDs are most commonly equipped with a high-speed NVMe interface, implemented through an NGFF connector with an M-key, known as M.2 M-key. The KAmod USB-PCIE-M2 adapter allows you to connect an M.2 M-key SSD to a computer via a USB port.
zł78.15
24h
Available quantity: 118
Available
PoE HAT (G) allows Raspberry Pi 5 to be powered without the need for an additional power cable, using only an Ethernet cable compatible with Power over Ethernet technology. With high output power and a compact design, the HAT is ideal for projects requiring stability, space efficiency, and clean integration—especially when used with the official Raspberry Pi 5 case.
zł60.47
4 weeks
No product available!
The Quectel 5G RM520N-GL module kit is designed for use with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare RM520N-GL 5G HAT (with case) (EU)