RFID HAT - module with RFID reader for Raspberry Pi
ID: 1178318
5906623477128
zł131.13
Tax included
zł106.61 tax excl.
Module with an RFID reader designed to work with the Raspberry Pi. Equipped with an OLED display and a buzzer. SB Components 20003
Description
Module with an RFID reader designed to work with the Raspberry Pi. It works at a frequency of 125 kHz and allows you to read the ID information stored on the key ring and RFID tags. The board is equipped with a 0.91" OLED display and a buzzer. Communication is via the UART (RFID reader) and I2C (OLED display) interface. It can be used as an element of room access control systems, elements of identification systems. documentation with examples is available on the product Wiki page.
Pinout
Features
- UART, I2C communication interface
- Supports 125kHz key fobs and tags
- Programmable buzzer
- Configuration jumpers
- Built-in 0.91 inch OLED display
- UART baud rate: 9600 bps
- Control voltage: 5V
- Dimensions: 65 x 56 mm
Kit contains
- RFID HAT
- RFID card
- RFID key ring
1178318
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł162.90
24h
Available quantity: 130
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł249.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł338.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł525.00
Delivery date unknown
No product available!
Other products in the same category (16)
RS485 CAN HAT is an extension designed for the Raspberry Pi mini-computer in the form of a HAT overlay. Adds RS485 and CAN interfaces for the Raspberry Pi plate. Interface signals are derived as screw and goldpin connectors. RS485 CAN HAT
zł43.90
24h
Available quantity: 23
Available
SIM7600E-H 4G HAT is an expansion module for Raspberry Pi for communication via GSM / GPRS cellular networks based on Simcom SIM7600E-H chipset. Waveshare SIM7600E 4G HAT
zł269.78
24h
Available quantity: 14
Available
Radio module with the RFM69HCW (868 MHz or 915 MHz) system, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4072
zł110.65
4 weeks
No product available!
Radio module with RFM69HCW 433 MHz chip, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4073
zł144.14
24h
Available quantity: 2
Available
Board with the NB-IoT SIM7020E module for the Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7020E-NB-IoT HAT
zł82.80
24h
Available quantity: 3
Available
HAT designed for Raspberry Pi minicomputers with a two-channel RS232 converter. Communication is realized via the SPI interface. The overlay uses a standard 40-pin Raspberry Pi connector. Waveshare 2-CH RS232 HAT
zł77.86
24h
Available quantity: 2
Available
4G/3G/2G communication module and GNSS positioning. It allows making phone calls, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP support and GPS, BeiDou, Glonass, LBS support. Waveshare SIM7600G-H 4G HAT
zł320.42
24h
Available quantity: 1
Available
HAT designed for Raspberry Pi minicomputers with a two-channel RS485 converter. Communication is realized via the SPI interface. The overlay uses a standard 40-pin Raspberry Pi connector. Waveshare 2-CH RS485 HAT
zł84.41
4 weeks
No product available!
HAT with 2-channel CAN converter designed for Raspberry Pi minicomputers. The communication was based on the CAN controller MCP2518FD as well as the MCP2562FD transceiver and SPI interface. Waveshare 2-CH CAN FD HAT
zł195.82
4 weeks
No product available!
The 4-port HUB module with USB 3.2 interface is designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB HAT
zł61.75
24h
Available quantity: 4
Available
The set with the SIMCom 5G module SIM8202G-M2 designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (EU)
zł1,487.92
4 weeks
No product available!
Expansion board with GSM/GPRS module designed for Arduino and Raspberry Pi. It uses the Quectel M95 chip, the board has two audio connectors, a microSD slot and a dual SIM slot. A-GSM II Shield
zł204.67
6 weeks
No product available!
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
zł39.90
24h
Available quantity: 83
Available
4-port HUB module with USB 2.0 interface designed to work with the Raspberry Pi minicomputer. Waveshare USB HUB HAT (B)
zł25.71
4 weeks
No product available!
A 3-port HUB module with a USB 2.0 interface with an RJ45 connector, designed to work with the Raspberry Pi minicomputer. Waveshare ETH/USB HUB HAT (B)
zł45.74
24h
Available quantity: 11
Available
A 3-port HUB module with a USB 3.2 Gen1 interface with an RJ45 connector designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB Gigabit ETH HAT
zł109.88
24h
Available quantity: 2
Available
Module with an RFID reader designed to work with the Raspberry Pi. Equipped with an OLED display and a buzzer. SB Components 20003