- Out-of-Stock
Filament ROSA3D PLA Starter 1.75mm Gray
ID: 587800
5907753130228
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Gray
Description
1.75 mm PLA filament for 3D printing by ROSA3D. 0.8 kg of filament is wound on the spool. The recommended printing temperature is in the range from 185°C to 225°C, and the bed temperature during printing in the range of 40°C - 60°C, however, when using adhesives, heating the bed is not necessary.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PLA Starter from Rosa3D was designed for beginner users of 3D printers. The simplicity of PLA Starter printing will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects.
PLA is the basic material used in 3D printing. PLA Starter is characterized by low shrinkage and no unpleasant odor. The prints are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food.
Features
- Color: Gray
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02 mm
- Printing temperature: 185°C to 225°C
- Bed temperature: 40°C to 60°C (when using washers or other means to increase the adhesion heating of the table is not required)
- Density 1.24 g/cm3
- Odorless smell
- Elongation at tensile 6%
- Tensile strength (to break) 53 MPa
- Modulus of elasticity at tensile 3500 MPa
- Heat deformation temperature 55°C
- Net weight: 0.8 kg
587800
Data sheet
- Rodzaj filamentu
- PLA
- Ilość filamentu
- 0,8 kg
- Diameter
- 1,75 mm
- Colour
- Gray
You might also like
3D printer with dual color print and heated table. The printer is fully assembled and ready to use. Flashforge Creator PRO
Regular pricezł4,365.91zł3,199.00
24h
Available quantity: 1
Available
Easy PLA filament in black, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Black
zł84.62
24h
Available quantity: 3
Available
Easy PLA filament in orange, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Orange
zł84.61
24h
Available quantity: 3
Available
Filament by PlastSpaw with an excellent quality-price ratio. Made of high-quality PLA granules. 1 kg of filament with a diameter of 1.75 mm is wound on the spool
zł33.90
24h
Available quantity: 37
Available
Filament by PlastSpaw with an excellent quality-price ratio. Made of high-quality PLA granules. 1 kg of filament with a diameter of 1.75 mm is wound on the spool
zł48.90
24h
Available quantity: 2
Available
Other products in the same category (16)
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes and two areas of 8x20 holes with a pitch of 2.54 mm with marked pin labels. SB Components 21505
Retired
No product available!
1-channel module with a relay designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21277
Retired
No product available!
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets (one male and one female) of 2x20 pin strips. SB Components 20812
Retired
No product available!
Module with a three-dimensional LED matrix 4x4x4 (64 LED) dedicated to the Raspberry Pi Pico. It allows you to control each LED and obtain 3D lighting effects. SB Components 22663
Retired
No product available!
Bluetooth 5.1 module (BLE, SPP) designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-BLE
Retired
No product available!
A portable 65 W soldering iron has an adjustable operating temperature in the range from 100°C to 400°C. It can be powered by a 12-24 V adapter or a battery with an XT60 connector. The set includes a soldering iron and a D24 tip
Retired
No product available!
A portable 65 W soldering iron has an adjustable operating temperature in the range from 100°C to 400°C. It can be powered by a 12-24 V adapter or a battery with an XT60 connector. The set includes a soldering iron and a B2 tip
Retired
No product available!
Module with 4 LED displays (three LEDs in red, yellow and green) dedicated to the Raspberry Pi. Perfect for use as a traffic light. SB Components 06977
Retired
No product available!
6-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 21802
Retired
No product available!
4-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 06670
Retired
No product available!
The PCA9685 servo driver module is dedicated to Raspberry Pi minicomputers. It allows you to control 16 PWM channels. SB Components 08957
Retired
No product available!
The PCA9685 servo driver module is dedicated to micro: bit educational boards. It allows you to control 16 PWM channels. SB Components 09183
Retired
No product available!
Module with RFID reader. It is equipped with a buzzer and communicates via UART or USB interface. SB Components 20669
Retired
No product available!
Module with a differential pressure sensor based on the MPXV5010DP system. It uses a 22-bit ADC converter and measures the pressure between the two inlets up to 10 kPa. SB Components 20638
Retired
No product available!
USB-UART/I2C converter based on the MCP2221 chip. It enables communication of devices with UART or I2C interface with a computer. SB Components 21246
Retired
No product available!
The Murata LQM18DH6R8M70L is a high-quality 6.8 µH inductor supporting up to 330 mA current, ideal for compact applications such as DC/DC power supplies and mobile devices. It features low series resistance (ESR) and excellent stability for efficient operation, and its SMD 0603 package allows easy integration into modern electronics designs.
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Gray