- Out-of-Stock
Filament ROSA3D PET-G Standard 1.75mm Gray 3kg
ID: 587814
5907753130044
ROSA3D filament made of high-quality PET-G granules. 3 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Gray
Description
1.75 mm PET-G filament for 3D printing by ROSA3D. 3 kg of filament is wound on the spool. The recommended printing temperature is in the range from 220°C to 260°C, and the temperature of the bed during printing in the range of 60°C - 80°C.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PET-G Standard dedicated to people who deal with amateur and professional 3D prints. It will be used in the creation of prototypes and large-format prints.
Filament PET-G Standard from ROSA3D is characterized by the ease of printing comparable to PLA. The details are characterized by precise details, good adhesion to the work table, odorlessness and a low level of shrinkage. Printouts are distinguished by high chemical resistance. They can be sanded, drilled, sawn, sanded, cut and painted without compromising the structural integrity of the component. The PET-G Standard filament is made of raw materials that are approved for contact with food.
Features
- Color: Gray
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02mm
- Printing temperature: 220°C to 260°C
- Bed temperature: 60°C to 80°C
- Density: 1.29 g/cm3
- Odorless: smell
- Elongation at tensile 5.5%
- Tensile strength (to break) 47 MPa
- Tensile modulus is 2980 MPa
- Impact strength according to the Izod method with a notch of 4.7 kJ/m2
- Vicat softening point 78 °C
- Net weight: 3 kg
587814
Data sheet
- Rodzaj filamentu
- PET-G
- Ilość filamentu
- 3 kg
- Diameter
- 1,75 mm
- Colour
- Gray
You might also like
Easy-to-use and intuitive 3D printer with touch display and USB, WiFi and intelligent door support. The printer is fully assembled and ready to use. Flashforge Inventor IIS
Regular pricezł3,704.21zł1,999.00
24h
Available quantity: 1
Available
Easy PET-G filament in gray with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Gray
zł75.01
24h
Available quantity: 2
Available
Easy PET-G filament in Onyx with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Onyx
zł85.01
24h
Available quantity: 1
Available
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.40
Delivery date unknown
No product available!
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł52.90
24h
Available quantity: 33
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł54.46
24h
Available quantity: 261
Available
Other products in the same category (16)
Xmega eXploreGO module with ATXmega128A4U microcontroller (version without MP3). The module is equipped with in DataFlash memory, microSD card connector. MOD-20 / AZ
Retired
No product available!
MOD-21.Z - push button module with bistable operation. The sensor operates based on the AT42QT1012 system.
Retired
No product available!
The Raspberry Pi GPIO connector adapter allows you to output signals from Raspberry Pi to the contact plate. Two LEDs indicate +3.3V and +5V power supply
Retired
No product available!
No product available!
MOD-25.Z - touch sensitive button module with monostable function. The sensor operates based on the AT42QT1011 system.
Retired
No product available!
No product available!
No product available!
The module enables connection of two devices with I2C interface working with different voltage levels. MOD-28.Z
Retired
No product available!
It is used to monitor the temperature measurement and other parameters. The expansion module has an I2C / 1-Wire converter (DS2482) through which DS18B20 temperature sensors can be connected using two or three wires. MOD-29.Z
Retired
No product available!
Power module with IRFR4105Z transistor (MOD-30.Z), maximum current 2A, 5V power supply or 5V - 12V range (selection by jumper)
Retired
No product available!
The module with the DS18B20 sensor is used to measure the temperature in the range from -55° C to + 125° C, with an accuracy of +/- 0.5° C in the range from -10° C to + 85° C. The module communicates via the 1-Wire interface, thanks to which it can be connected using 2 or 3 wires - depending on the configuration. Temperature measurement can be performed with an accuracy of 9 to 12 bits. MOD-31.Z
Retired
No product available!
Universal module with LM358 operational amplifier. Depending on the additional elements installed, the amplifier can be freely configured, eg as a reversing, non-inverting amplifier, voltage follower or an integrating amplifier. MOD-32.Z
Retired
No product available!
No product available!
The modally controlled modulation module MOD-34 / BZ allows wireless load control with a current consumption of up to 10A via a relay. Includes wireless module nRF24l01.
Retired
No product available!
No product available!
No product available!
ROSA3D filament made of high-quality PET-G granules. 3 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Gray