- Out-of-Stock
Filament ROSA3D PET-G Standard 1.75mm White 3kg
ID: 587813
5907753130037
ROSA3D filament made of high-quality PET-G granules. 3 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard White
Description
1.75 mm PET-G filament for 3D printing by ROSA3D. 3 kg of filament is wound on the spool. The recommended printing temperature is in the range from 220°C to 260°C, and the temperature of the bed during printing in the range of 60°C - 80°C.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PET-G Standard dedicated to people who deal with amateur and professional 3D prints. It will be used in the creation of prototypes and large-format prints.
Filament PET-G Standard from ROSA3D is characterized by the ease of printing comparable to PLA. The details are characterized by precise details, good adhesion to the work table, odorlessness and a low level of shrinkage. Printouts are distinguished by high chemical resistance. They can be sanded, drilled, sawn, sanded, cut and painted without compromising the structural integrity of the component. The PET-G Standard filament is made of raw materials that are approved for contact with food.
Features
- Color: White
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02mm
- Printing temperature: 220°C to 260°C
- Bed temperature: 60°C to 80°C
- Density: 1.29 g/cm3
- Odorless: smell
- Elongation at tensile 5.5%
- Tensile strength (to break) 47 MPa
- Tensile modulus is 2980 MPa
- Impact strength according to the Izod method with a notch of 4.7 kJ/m2
- Vicat softening point 78 °C
- Net weight: 3 kg
587813
Data sheet
- Rodzaj filamentu
- PET-G
- Ilość filamentu
- 3 kg
- Diameter
- 1,75 mm
- Colour
- White
You might also like
Easy-to-use and intuitive 3D printer with touch display and USB, WiFi and intelligent door support. The printer is fully assembled and ready to use. Flashforge Inventor IIS
Regular pricezł3,704.21zł1,999.00
24h
Available quantity: 1
Available
Easy PET-G filament in orange with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Orange
zł75.01
24h
Available quantity: 2
Available
Easy PET-G filament in silver with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Silver
zł85.01
24h
Available quantity: 1
Available
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.40
Delivery date unknown
No product available!
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł52.90
24h
Available quantity: 27
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł54.46
24h
Available quantity: 261
Available
Other products in the same category (16)
A 150mm 2-wire cable terminated terminated with a plug and socket JST XH2.54.. 22AWG cable diameter.
Retired
No product available!
Digital microscope with 3" LCD display and HDMI output. The microscope is equipped with a 3MPx image sensor with a magnification factor up to 300 times. Andonstar ADSM201
Retired
No product available!
120W power supply, 24VDC output voltage and 5A output current. Mounting on a DIN rail. Built-in overload and short circuit protection. MEAN WELL DR-120-24
Retired
No product available!
A hand-held thermal imaging camera with a 2.4" LCD screen. It measures the temperature in the range from -20 to 300°C. HTI HT-02D
Retired
No product available!
LCD display with LED backlight (white), negative blue, 2x20, with extended temperature range, meeting the requirements of RoHS
Retired
No product available!
Four-wheeled chassis for self-assembly. The kit contains all the necessary mechanical elements that are needed to build this type of structure. SeeedStudio Robot car Kit- RC Smart Car Chassis Kit
Retired
No product available!
Evaluation kit with Zynq Ultrascale+ MPSoC, integrating the ARM Cortex-A53 platform, Cortex-R5 real-time processor, Mali-400 MP2 graphics processor and FinnFET+ programmable logic. Provides the SYZYGY interface connector. Digilent Genesys ZU-3EG (410-383-3EG)
Retired
No product available!
GPS module with GNSS L76X receiver. It can receive data from GPS, BDS and QZSS systems. It uses the UART interface and offers an accuracy of up to 2.5 m. Waveshare L76X GPS HAT
Retired
No product available!
The 1.5V AAA alkaline battery allows the use of small portable electrical devices without the need for mains power. Set contains 12 pieces. GP 24A-PB(8+4)
Retired
No product available!
High purity 100% silicone oil spray protection and lubrication for versatile use. MICRO CHIP ELEKTRONIC ART. 192
Retired
No product available!
Black and silver aluminum case designed for Raspberry Pi 4B. It acts as a heat sink and ensures proper heat dissipation from the processor. FLIRC 102476
Retired
No product available!
Lens for ArduCAM cameras with variable M12 lens designed for Raspberry Pi. It is characterized by a 8mm focal length, 40/45 ° view angle and 1/3 format. ArduCAM LS-8020
Retired
No product available!
BeagleBone AI is a minicomputer with an AM5729 processor, it has 1 GB of DDR3L RAM memory. It was created to explore issues related to artificial intelligence. BBBONE-AI
Retired
No product available!
NanoPi M4V2 is a FriendlyELEC single board computer. It uses LPDDR4 RAM memory and adds among others: POWER and RECOVERY micro switches and a microphone input.
Retired
No product available!
NanoPI NEO is a single-board chip from FriendlyELEC with a RAM of 256 MB, successfully competing with the systems created by the giant in this field Raspberry Pi. It is 25% smaller and cheaper than the Raspberry Pi Zero board with similar capabilities
Retired
No product available!
HAT for powering over Ethernet (PoE) for Raspberry Pi. It allows you to use the PoE interface to power the minicomputer via an Ethernet cable
Retired
No product available!
ROSA3D filament made of high-quality PET-G granules. 3 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard White