- Out-of-Stock
Filament ROSA3D PA12 + CF15 1.75mm Black 2.5kg
ID: 587811
5907753130198
ROSA3D filament made of PA12 nylon with the addition of carbon fibers. 2.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PA12 + CF15
Description
ROSA3D PA12 + CF15 filament for 3D printing with a diameter of 1.75 mm. 2.5 kg of filament is wound on the spool. The recommended printing temperature is in the range of 250°C to 300°C, and the temperature of the bed during printing is in the range of 70°C to 120°C.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. PA12 + CF15 is a technical filament for industrial applications. It is designed for 3D printing in FDM technology for intermediate people and professionals.
Prints made of PA12 + CF15 filament have a thermal resistance of 160°C. The material can be used as a substitute for steel elements to reduce the weight of the device or structure without losing the strength of the entire system. It is easy to print and, thanks to the filling with carbon fiber, it is characterized by low processing shrinkage. When printing PA12 + CF15, hardened steel nozzles are recommended (brass and aluminum nozzles are subject to abrasion).
Attention!
The manufacturer recommends using a printing nozzle with a diameter of at least 0.5 mm.
Features
- Color: Black
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02mm
- Printing temperature: 250°C to 300°C
- Bed temperature: 70°C C to 120°C
- Density 1.07 g/cm3
- Odorless smell
- Elongation at tensile 5%
- Tensile strength (to break) 125 MPa
- Tensile modulus 8000 MPa
- Heat deformation temperature 170°C (0.45MPa), 150°C (1.8MPa)
- Charpy impact strength unnotched, 23°C: 75.0 kJ/m2; Notched, 23°C: 15.0 kJ/m2
- Net weight: 2.5 kg
587811
Data sheet
- Rodzaj filamentu
- Nylon
- Ilość filamentu
- 2,5 kg
- Diameter
- 1,75 mm
- Colour
- Black
You might also like
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł52.90
24h
Available quantity: 27
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł54.46
24h
Available quantity: 261
Available
Other products in the same category (16)
Assembled fume extraction controller. AVT3215 C
Retired
No product available!
No product available!
No product available!
NanoPi NEO Core Allwinner H3 Quad-Core 1,2Ghz + 256MB RAM
Retired
No product available!
NanoPi NEO Core2, Allwinner H5 Quad-Core 1.5Ghz + 1GB RAM + 8GB eMMC, without soldered GPIO pins
Retired
No product available!
NanoPi NEO Core is a small PCB equipped with the SoC Allwinner H3 chip and 512MB RAM. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C, I2S interface. The board can be powered from the Micro USB connector. FriendlyELEC NanoPi NEO Core
Retired
No product available!
NanoPi NEO Plus 2 single board computer (SoC) with Allwinner H5 processor Quad-Core 1GHz + 1GB RAM + 8GB eMMC, SoC (ARM Cortex A-53)
Retired
No product available!
A small minicomputer with the SoC Allwinner H5 quad-core system (ARM Cortex-A53). The system has a built-in 16-core Mali450 graphics coprocessor. The computer is equipped with 512 MB DDR3 RAM. There are images of UbuntuCore and Armbian systems available for the computer. NanoPi NEO2
Retired
No product available!
NanoPi Duo is a small PCB equipped with the SoC Allwinner H2+ system, RAM memory with a capacity of 256 MB and a built-in Wi-Fi module. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C interface. The set is perfect for light IoT applications
Retired
No product available!
NanoPi Duo is a small PCB equipped with the SoC Allwinner H2 system, RAM memory with a capacity of 512MB and a built-in Wi-Fi module. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C interface. The set is perfect for light IoT applications
Retired
No product available!
Alphanumeric OLED 2x16 display, with built-in WS0010 controller, communicating via 6800 interface, optionally 8080 or SPI. Winstar WEH001602AB
Retired
No product available!
Alphanumeric display OLED 16 characters x 2 lines, with built-in controller WS0010, communicating via 6800 interface, optionally 8080 or SPI. Winstar WEH001602AR
Retired
No product available!
Atlas-SoC Kit starter kit with the System-on-Chip system from the Cyclone V SoC family, in which, among others, dual core ARM Cortex-A9 processor (with a frequency of 925 MHz) and a large FPGA matrix (40,000 logic elements). Terasic P0419
Retired
No product available!
No product available!
No product available!
No product available!
ROSA3D filament made of PA12 nylon with the addition of carbon fibers. 2.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PA12 + CF15