ETH/USB HUB HAT 3-port USB 2.0 + RJ45 for Raspberry Pi - Waveshare 20416

Expansion Shield X300 with RTC real time clock; audio input and output; USB hub; Bluletooth, WIFI; SATA interface. Compatible with Raspberry Pi Model B+, Pi 2 Model B and Pi 3 Model B

Expansion board with LoRa E22-900T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. SB Components 22571

SIMCom 4G SIM7600G-H module kit designed to work with Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare  SIM7600G-H 4G HAT (B)

Set with SIMCom 5G SIM8262E-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8262E-M2 5G HAT

Communication module with the SIM800C system designed for Raspberry Pi minicomputers. Adds support for GSM/GPRS networks. Waveshare SIM800C GSM/GPRS HAT

The KAmod RPI 485&CAN Hat module extends the functionality of Raspberry Pi 5 boards (and others with a 3.3 V SPI interface) with two galvanically isolated RS485 interfaces and one CAN 2.0B interface. The RS485 interfaces are based on the SC16IS752 controller, and the CAN interface on the MCP2515 system. The isolated transceivers used (ADM2483 and TJA1052) increase resistance to interference. Communication takes place via two SPI interfaces, and additional power supply options (from RPi or external 8-32 V) and a stabilized 5 V output allow for flexibility in power supply. The module can be mounted on RPi 5, also with an Active Cooler radiator, and can work with other microcontrollers. The maximum transmission speeds are 500 kbps for RS485 and 1 Mbps for CAN

Module dedicated to Raspberry Pi, which supports various wireless communication modes, such as LTE-TDD, LTE-FDD, GSM, GPRS and EDGE. With download speeds of up to 10Mbps and upload speeds of up to 5Mbps, this module is perfect for IoT applications such as remote information processing, device monitoring, POS terminals, industrial routers, remote diagnostics and satellite positioning. Waveshare A7670E Cat-1/GNSS HAT

UART debugger module designed specifically for Raspberry Pi 5. Allows easy connection to UART debug connector via SH1.0 3PIN cable, ensuring convenient and effective debugging. Waveshare Pi UART Debugger

Modern SSDs are most commonly equipped with a high-speed NVMe interface, implemented through an NGFF connector with an M-key, known as M.2 M-key. The KAmod USB-PCIE-M2 adapter allows you to connect an M.2 M-key SSD to a computer via a USB port.

PCIe to Ethernet Adapter for Raspberry Pi 5. Extends the functionality of the Raspberry Pi 5 by adding a Gigabit Ethernet port with the high-performance RTL8111H controller. The adapter connects to the Raspberry Pi 5 using a 16-pin PCIe cable. Waveshare PCIe TO Gigabit ETH Board (C)

Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare SX1262 868/915M LoRaWAN HAT

The set with the RM500Q-GL module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL 5G HAT (EU)

The 2-CH CAN HAT+ expansion board adds two isolated CAN channels to the Raspberry Pi, with support for further expansion. Featuring the HAT+ standard, galvanic isolation, and surge protection, it is well-suited for industrial, automotive, and automation applications where reliable and safe serial communication is essential.

The PCIe to M.2 Board (E) adapter for Raspberry Pi 5 enables integration of high-speed NVMe M.2 drives and efficient cooling thanks to a PWM fan and heatsink. Its compact design, compatibility with 2230/2242 formats, and full integration with the Raspberry Pi 5 board make the module ideal for projects that require high disk performance and reliable operation.

PoE M.2 E KEY HAT+ is an add-on board for the Raspberry Pi 5 that enables the connection of M.2 E Key cards with Power over Ethernet (PoE) functionality. Thanks to support for 5 V and 12 V power outputs, dual antenna connectors, and compatibility with popular wireless card standards, the module is well-suited for network projects, IoT applications, and systems requiring stable power supply and high-performance wireless communication.

3-port HUB module with USB 2.0 interface with RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Case included. Waveshare PoE-ETH-USB-HUB-BOX