PoE M.2 HAT+ (B) PCIe to M.2 NVMe with PoE for Raspberry Pi 5 - Waveshare 29320
ID: 1197486
5902186307391
zł89.85
Tax included
zł73.05 tax excl.
PoE M.2 HAT+ (B) is a practical add-on board for Raspberry Pi 5 that enables simultaneous power over Ethernet and installation of a high-performance NVMe SSD. With boot support from the SSD and additional power output terminals, this module is ideal for projects requiring fast storage and reliable power supply, such as servers, surveillance systems, or IoT gateways.
Description
The PCIe M.2 HAT+ (B) expansion enables connection of an NVMe SSD to the Raspberry Pi 5 while simultaneously powering the device via PoE (Power over Ethernet) compliant with IEEE 802.3af/at. The adapter uses the 16-pin PCIe connector on the Raspberry Pi 5 and a standard 40-pin GPIO header, allowing parallel use of other HAT add-ons. It supports both Gen2 and Gen3 protocols, allows system boot from the SSD, and is compatible with 2230, 2242, 2260, and 2280 SSD formats. Power over Ethernet enables data and power transmission through a single cable, simplifying network integration. The board also features LED indicators for monitoring status and additional 5 V and 12 V power outputs for external peripherals.
Features
- Supports NVMe-compatible M.2 SSDs (2230 / 2242 / 2260 / 2280 formats)
- IEEE 802.3af/at PoE standard support
- PoE input voltage: 37 V – 57 V DC
- Power output: 5 V 4.5 A (GPIO), 12 V 2 A (2-pin header)
- PCIe Gen2 / Gen3 support, boot from SSD possible
- 16-pin PCIe connector for Raspberry Pi 5
- Power output terminals for external devices (5 V and 12 V)
- Dual LED indicators showing operating status
- High-quality gold immersion finish
- Dimensions: 56.0 × 85.0 mm
Included
- PoE M.2 HAT+ (B)
- 16-pin PCIe cable
- SSD mounting screw
- Set of mounting screws
1197486
Data sheet
- Compatible with
- Raspberry Pi 5
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Radio module with RFM69HCW 433 MHz chip, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4073
zł144.14
24h
Available quantity: 2
Available
Board with the NB-IoT SIM7020E module for the Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7020E-NB-IoT HAT
zł82.80
24h
Available quantity: 2
Available
HAT designed for Raspberry Pi minicomputers with a two-channel RS232 converter. Communication is realized via the SPI interface. The overlay uses a standard 40-pin Raspberry Pi connector. Waveshare 2-CH RS232 HAT
zł77.86
24h
Available quantity: 2
Available
4G/3G/2G communication module and GNSS positioning. It allows making phone calls, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP support and GPS, BeiDou, Glonass, LBS support. Waveshare SIM7600G-H 4G HAT
zł366.07
4 weeks
No product available!
HAT designed for Raspberry Pi minicomputers with a two-channel RS485 converter. Communication is realized via the SPI interface. The overlay uses a standard 40-pin Raspberry Pi connector. Waveshare 2-CH RS485 HAT
zł84.41
24h
Available quantity: 7
Available
HAT with 2-channel CAN converter designed for Raspberry Pi minicomputers. The communication was based on the CAN controller MCP2518FD as well as the MCP2562FD transceiver and SPI interface. Waveshare 2-CH CAN FD HAT
zł195.82
4 weeks
No product available!
The 4-port HUB module with USB 3.2 interface is designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB HAT
zł61.75
4 weeks
No product available!
The set with the SIMCom 5G module SIM8202G-M2 designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (EU)
zł1,487.92
4 weeks
No product available!
Expansion board with GSM/GPRS module designed for Arduino and Raspberry Pi. It uses the Quectel M95 chip, the board has two audio connectors, a microSD slot and a dual SIM slot. A-GSM II Shield
zł204.67
6 weeks
No product available!
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
zł39.90
24h
Available quantity: 45
Available
4-port HUB module with USB 2.0 interface designed to work with the Raspberry Pi minicomputer. Waveshare USB HUB HAT (B)
zł26.09
24h
Available quantity: 7
Available
A 3-port HUB module with a USB 2.0 interface with an RJ45 connector, designed to work with the Raspberry Pi minicomputer. Waveshare ETH/USB HUB HAT (B)
zł44.90
24h
Available quantity: 8
Available
A 3-port HUB module with a USB 3.2 Gen1 interface with an RJ45 connector designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB Gigabit ETH HAT
zł110.45
4 weeks
No product available!
3-port HUB module with USB 2.0 interface and RJ45 connector. Designed for Raspberry Pi Zero. Housing included. Waveshare ETH-USB-HUB-BOX
zł59.09
24h
Available quantity: 16
Available
4-port HUB module with USB 2.0 interface. Designed for Raspberry Pi Zero. Case included. Waveshare USB-HUB-BOX
zł42.95
24h
Available quantity: 4
Available
3-port HUB module with USB 2.0 interface with RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Case included. Waveshare PoE-ETH-USB-HUB-BOX
zł117.83
24h
Available quantity: 3
Available
PoE M.2 HAT+ (B) is a practical add-on board for Raspberry Pi 5 that enables simultaneous power over Ethernet and installation of a high-performance NVMe SSD. With boot support from the SSD and additional power output terminals, this module is ideal for projects requiring fast storage and reliable power supply, such as servers, surveillance systems, or IoT gateways.