SIM7600E-H 4G/3G/2G/GSM/GPRS/GNSS Communication Module for Raspberry Pi - Waveshare 14952
ID: 572612
5906623424214
zł294.19
Tax included
zł239.18 tax excl.
SIM7600E-H 4G HAT is an expansion module for Raspberry Pi for communication via GSM / GPRS cellular networks based on Simcom SIM7600E-H chipset. Waveshare SIM7600E 4G HAT
Description
SIM7600E-H 4G HAT is a module that extends the capabilities of Raspberry P and communication via GSM / GPRS cellular networks. To this end, Simcom SIM7600E system was used, thanks to it it is possible to make and receive calls (it is possible to connect a microphone and headphones - jack sockets), send and receive SMS messages, use of wireless internet. The module is controlled by AT commands via the UART of the Raspberry Pi computer (9600 bps by default).
SIM7600E-H 4G HAT is a 4G / 3G / 2G communication module and a GNSS positioning module that supports LTE CAT4 up to 150 Mbps for data transfer. The 4G module can be connected to a computer to surf the Internet or attach it to Raspberry Pi to enable functions such as fast 4G connection, wireless communication or global positioning.
The module has support in the form of libraries for Raspberry Pi , Arduino , STM32 .
Attention!
The Rasbperry Pi computer seen in the pictures is not included in the set. The module for operation requires a mini-SIM card (or NB-IoT card) placed in the slot from the bottom of the board. To use micro-SIM or nano-SIM cards, use an adapter.
properties
- Compatible with Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B +
- Based on the system: SIM7600E-H
- Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.
- Supports GNSS positioning (GPS, GLONASS, BeiDou)
- Built-in USB interface for testing AT commands, obtaining GPS positioning data
- Connector with derived UART interface to connect to hosts such as Arduino / STM32
- The internal voltage translator, 3.3 V by default, allows switching to 5V with a 0Ω resistor
- Mini-SIM card slot
- 2x LED indicators, easy to monitor the operating status
- Transmission speed: 300bps ~ 4Mbps
- Control by means of AT commands (Extended AT 3GPP TS 27.007, 27.005 and SIMCOM commands)
- Supports the SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT
- 3.5 mm jack connector for connecting a headset
- Power supply: 5V
- Operating voltage: 5 V / 3.3 V (3.3 V by default)
- Working temperature: -30 ... 80 ° C
- Dimensions: 56.21 x 65.15 mm
Included
- SIM7600E-H 4G HAT
- LTE antenna
- External GPS antenna (B)
- MicroUSB <> USB cable
- Set of mounting distance (2 pieces)
572612
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
MY-GPRS007C GPRS Module, MYIR
Regular pricezł321.15zł198.53
24h
Available quantity: 1
Available
Introducing Adafruit FONA 808 GSM + GPS Shield, an all-in-one cellular phone module with that lets you add location-tracking, voice, text, SMS and data to your project, in Arduino shield format for easy use. Adafruit 2636
zł326.70
Delivery date unknown
No product available!
SIM7000E NB-IoT HAT is a module that extends the capabilities of Raspberry Pi for communication via GSM / GPRS cellular networks based on Simcom Sim7000E. It has support for NB-IoT, eMTC, EDGE, GPRS and GNSS. Waveshare SIM7000E NB-IoT HAT
zł163.28
24h
Available quantity: 13
Available
Other products in the same category (16)
SIM7600G-H 4G GbE USB3.2 HAT+ is a comprehensive communication expansion module for the Raspberry Pi 5, offering reliable LTE mobile connectivity, high-speed Ethernet, and additional USB ports. With GNSS support, compatibility with multiple operating systems, and versatile functionality, the module is ideal for IoT applications, industrial routers, and remote monitoring and control systems.
zł330.94
4 weeks
No product available!
Module dedicated to Raspberry Pi, which supports various wireless communication modes, such as LTE-TDD, LTE-FDD, GSM, GPRS and EDGE. With download speeds of up to 10Mbps and upload speeds of up to 5Mbps, this module is perfect for IoT applications such as remote information processing, device monitoring, POS terminals, industrial routers, remote diagnostics and satellite positioning. Waveshare A7670E Cat-1/GNSS HAT
zł127.99
24h
Available quantity: 4
Available
PCIe TO MiniPCIe GbE USB3.2 HAT+ expansion with EG25-G modem provides reliable LTE connectivity, high-speed data transfer via USB 3.2 ports, and efficient wired Ethernet connection. Dedicated for Raspberry Pi 5, it offers a comprehensive communication solution for industrial projects, edge routers, IoT gateways, and positioning applications.
zł330.94
4 weeks
No product available!
Versatile CAN bus interface based on the MCP2518FD controller, enabling communication in CAN 2.0 and CAN FD modes via SPI interface, compatible with SBC computers, including Raspberry Pi 5, with additional security and the ability to support two modules simultaneously
zł69.77
24h
Available quantity: 117
Available
PoE M.2 HAT+ (B) is a practical add-on board for Raspberry Pi 5 that enables simultaneous power over Ethernet and installation of a high-performance NVMe SSD. With boot support from the SSD and additional power output terminals, this module is ideal for projects requiring fast storage and reliable power supply, such as servers, surveillance systems, or IoT gateways.
zł95.02
4 weeks
No product available!
HAT module designed for Raspberry Pi minicomputer. Powala adds two RS485 interfaces and one CAN bus to the project. Waveshare RS485 CAN HAT (B)
zł106.80
24h
Available quantity: 8
Available
PCIe To M.2 E KEY HAT+ adapter expands the capabilities of the Raspberry Pi 5 with support for high-speed Wi-Fi/Bluetooth network cards in M.2 E Key format. It supports direct PCIe connection and Bluetooth integration via USB. Robust antenna connectors and compliance with the HAT+ standard make it an ideal solution for IoT projects, network gateways, and compact routers based on the Raspberry Pi 5.
zł36.84
24h
Available quantity: 2
Available
PCIe TO M.2 USB ETH HAT+ Add-on Board – Expansion for Raspberry Pi 5 providing USB 3.2 ports, 2.5G Ethernet, and an M.2 slot for high-speed NVMe drives. Enables significant operational and communication performance upgrades for embedded systems and Raspberry Pi-based servers.
zł188.26
4 weeks
No product available!
Radio module with RFM69HCW 433 MHz chip, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4073
zł144.14
24h
Available quantity: 2
Available
PCIe TO PCIe x1 Board (C) with EU power adapter is a practical adapter that enables connecting standard PCIe cards to the Raspberry Pi 5. The dedicated 12 V power supply ensures stable operation of high-demand PCIe devices, and the universal slot supporting x1 to x16 formats offers great flexibility in selecting expansions. It is an ideal solution for building compact systems with network, storage, or industrial interface extensions.
zł57.27
24h
Available quantity: 2
Available
HAT designed for Raspberry Pi minicomputers with a two-channel RS485 converter. Communication is realized via the SPI interface. The overlay uses a standard 40-pin Raspberry Pi connector. Waveshare 2-CH RS485 HAT
zł84.41
24h
Available quantity: 9
Available
Modern SSDs are most commonly equipped with a high-speed NVMe interface, implemented through an NGFF connector with an M-key, known as M.2 M-key. The KAmod USB-PCIE-M2 adapter allows you to connect an M.2 M-key SSD to a computer via a USB port.
zł78.15
24h
Available quantity: 140
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
zł108.63
24h
Available quantity: 4
Available
RS485 CAN HAT is an extension designed for the Raspberry Pi mini-computer in the form of a HAT overlay. Adds RS485 and CAN interfaces for the Raspberry Pi plate. Interface signals are derived as screw and goldpin connectors. RS485 CAN HAT
zł43.90
4 weeks
No product available!
PCIE TO 4-CH NVME Board (B) (EU) provides significant functionality expansion for the Raspberry Pi 5, enabling the use of high-speed NVMe SSDs. The version with an included power supply offers a ready-to-use solution for applications requiring high data throughput and reliable storage, such as NAS systems, surveillance, or miniature servers.
zł147.61
24h
Available quantity: 2
Available
The EM060K-GL LTE Cat-6 module kit is designed for use with the Raspberry Pi minicomputer. It supports communication over the high-speed LTE-A network and GNSS positioning. Waveshare EM060K-GL LTE Cat-6 HAT
zł473.19
24h
Available quantity: 2
Available
SIM7600E-H 4G HAT is an expansion module for Raspberry Pi for communication via GSM / GPRS cellular networks based on Simcom SIM7600E-H chipset. Waveshare SIM7600E 4G HAT