- Out-of-Stock
Module e-Paper Pico 5.65" E-Ink 7-color 600x448 for Raspberry Pi Pico - Waveshare 20299
ID: 587050
5906623425860
Module with 7-color ACeP e-Paper display, 5.65" diagonal and 600x448 px resolution. Communication via SPI interface. Waveshare Pico-ePaper-5.65
Description
The module with a 7-color ACeP e-Paper display with a diagonal of 5.65" and a resolution of 600x448 px, designed to work with the Raspberry Pi Pico. It has the ability to display content with a two-level gray scale and supports ACeP (Advanced Color ePaper) technology. SPI interface. Displays of this type are characterized by high contrast of the displayed image and consume power only when the displayed content is changed.The module is compatible with 3.3 V and 5 V systems. Full documentation with examples is available on the product wiki page.
Pinout
Features
- Diagonal: 5.65"
- Resolution: 600 x 448 px
- Display color: ACeP 7-Color
- Gray levels: 2
- Interface: 3-wire SPI, 4-wire SPI
- Pixel size: 0.1915 × 0.1915
- Full refresh time: 35 seconds
- Power consumption: 50 mW
- Viewing angle:> 170 °
- No backlight, display the last content after power off
- Low energy consumption
- Built-in logic level converter, compatible with 3.3V / 5V MCU
- Working voltage: 3.3V / 5V
- Display size: 114.9 x 85.8 mm
- Module dimensions: 128 x 101.5 mm
Kit contains
- Pico-ePaper-5.65 display module
- 4 x distance
587050
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 5.65
- Resolution
- 600 x 448 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.30
24h
Available quantity: 2418
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Waveshare Pico-Quad-Expander
zł36.56
24h
Available quantity: 4
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. Waveshare Pico-Dual-Expander
zł29.14
24h
Available quantity: 3
Available
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917
zł23.90
24h
Available quantity: 114
Available
Other products in the same category (16)
The eMMC 5.1 flash memory module for Hardkernel Odroid C2 computers. 128GB capacity, Android operating system installed. The set includes a microSD adapter. Hardkernel
Retired
No product available!
The eMMC 5.1 flash memory module for Hardkernel Odroid C2 computers. 128GB capacity, installed Linux operating system. The set includes a microSD adapter. Hardkernel
Retired
No product available!
The eMMC 5.1 flash memory module for Hardkernel Odroid XU4 computers. 128GB capacity, Android operating system installed. The set includes a microSD adapter. Hardkernel
Retired
No product available!
The eMMC 5.1 flash memory module for Hardkernel Odroid XU4 computers. 128GB capacity, installed Linux operating system. The set includes a microSD adapter. Hardkernel
Retired
No product available!
Switch mode power supply with 12V output voltage and 1A current. It has a DC 5.5x2.1 plug and an EU plug. The power supply has built-in overload, overvoltage and short-circuit protection. ESPE-1212-W2E
Retired
No product available!
Rasberry Pi compatible FPGA module integrating Xilinx Zynq-7010, 512 MB DDR3L SDRAM, 4 USB ports, Ethernet port and 16 MB Flash memory. Trenz Electronic TE0726
Retired
No product available!
Li-Po battery 3.7V / 320mAh, PCM safety, connector + JST-BEC 2,54 socket, 2 pins, cable length 150mm
Retired
No product available!
Expansion module for NanoPi Duo2, equipped with an Ethernet port, serial port, audio and USB. It has a built-in quad-band SIM800C GSM / GPRS module. FriendlyELEC NanoPi Duo2 IoT-2G
Retired
No product available!
NanoPi Duo2 is a small PCB equipped with the SoC Allwinner H3 system, RAM memory with a capacity of 256MB and a built-in WiFi / Bluetooth module. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C interface. FriendlyELEC NanoPi Duo2
Retired
No product available!
LOGO! Text display TD with LED backlight designed for LOGO! 8 controllers. Powered by 12/24V voltage, it allows displaying 6 lines of text, 20 characters each. Siemens 6ED1055-4MH08-0BA0
Retired
No product available!
NanoPi Duo2 is a small PCB equipped with the SoC Allwinner H3 system, RAM memory with a capacity of 512MB and built-in WiFi / Bluetooth module. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C interface. FriendlyELEC NanoPi Duo2
Retired
No product available!
Starter kit with LOGO! 8 230RCE, software and necessary accessories. Siemens 6ED1057-3BA03-0AA8
Retired
No product available!
Starter kit with LOGO! 8 12/24RCE, power supply, software and necessary accessories. Siemens 6ED1057-3BA01-0AA8
Retired
No product available!
Li-Po battery 3.7V / 500mAh, PCM protection, connector + JST-BEC 2,54 socket, 2 pins, cable length 150mm
Retired
No product available!
Li-Po battery 3.7V / 560mAh with 100mm cables, PCM protection
Retired
No product available!
Li-Po battery 3.7V / 600mAh, PCM + NTC protection, 1.25 Molex connector, 3 pins, cable length 35mm
Retired
No product available!
Module with 7-color ACeP e-Paper display, 5.65" diagonal and 600x448 px resolution. Communication via SPI interface. Waveshare Pico-ePaper-5.65