SIM7000E NB-IoT HAT - communication module GSM / GPRS / GNSS
search
  • SIM7000E NB-IoT HAT - communication module GSM / GPRS / GNSS
  • SIM7000E NB-IoT HAT - communication module GSM / GPRS / GNSS - bottom view
  • SIM7000E NB-IoT HAT - communication module GSM / GPRS / GNSS - top view
  • SIM7000E NB-IoT HAT - communication module GSM / GPRS / GNSS - contents of the set
ID: 572609
5906623424191
zł155.90
Tax included

zł126.75 tax excl.

SIM7000E NB-IoT HAT is a module that extends the capabilities of Raspberry Pi for communication via GSM / GPRS cellular networks based on Simcom Sim7000E. It has support for NB-IoT, eMTC, EDGE, GPRS and GNSS. Waveshare SIM7000E NB-IoT HAT

24h
Available
Available quantity: 11
Kamami is the official distributor of Waveshare displays, accessories and modules.

Description

SIM7000E NB-IoT HAT is a module that extends the capabilities of Raspberry Pi for communication via GSM / GPRS cellular networks. To this end, Simcom SIM7000E system was used, thanks to it it is possible to make and receive calls, send and receive SMS messages, use wireless Internet. The module is controlled by AT commands via the UART of the Raspberry Pi computer (9600 bps by default).

SIM7000E NB-IoT HAT has many communication functions: NB-IoT, eMTC, EDGE, GPRS and GNSS. NB-IoT. (NarrowBand-Internet of Things) and eMTC (improved machine type communication) are the growing communication technologies IoT evolving from LTE (4G), and their advantages are low power, low cost, wide range, etc. They are suitable for applications such as intelligent instruments, remote control, tracking, remote monitoring, e-health, mobile POS terminals, bike sharing. GSM / GPRS and EDGE are, however, traditional 2G / 2.5G technologies that allow sending SMS messages or making other wireless connections.

The module has support in the form of libraries for Raspberry Pi , Arduino , STM32 .

Attention!


The Raspberry Pi computer seen in the pictures is not included in the kit. The module for operation requires a mini-SIM card (or NB-IoT card) placed in the slot from the bottom of the board. To use micro-SIM or nano-SIM cards, use an adapter.

properties

  • Compatible with Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B +
  • Based on the layout: SIM7000E
  • Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.
  • Supports GNSS positioning (GPS, GLONASS, BeiDou and Galileo)
  • Built-in USB interface for testing AT commands, obtaining GPS positioning data
  • Connector with derived UART interface to connect to hosts such as Arduino / STM32
  • Internal voltage stabilizer, 3.3 V by default (allows switching to 5V with a 0Ω resistor)
  • A mini-SIM card slot, compatible with both the normal SIM card and the NB-IoT special card
  • 2x LED indicators, easy to monitor the operating status
  • Transmission speed: 300bps ~ 3686400bps
  • Control by means of AT commands (Extended AT 3GPP TS 27.007, 27.005 and SIMCOM commands)
  • Supports the SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT
  • Power supply: 5V
  • Operating voltage: 5 V / 3.3 V (3.3 V by default)
  • Free mode current: 1.2 mA
  • Power saving mode: 9uA
  • Working temperature: -40 ~ + 85 ° C
  • Dimensions: 30.2 x 65 mm

Included

  • SIM7000E NB-IoT HAT
  • GSM antenna
  • External GPS antenna (B)
  • MicroUSB <> USB cable
  • Screw set (2 pieces)
572609

Data sheet

Compatible with
Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH

Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

You might also like

Other products in the same category (16)