PCIe adapter board 4-port M.2 NVMe for Raspberry Pi 5 (no PSU) - Waveshare 30535
ID: 1197705
5902186322110
zł117.03
Tax included
zł95.15 tax excl.
PCIE TO 4-CH NVME Board (B) NP is a PCIe expansion board for Raspberry Pi 5, allowing connection of up to four NVMe drives, improving system performance and enabling SSD boot. With power supply via Pi5 or an external source and support for multiple M.2 formats, it is ideal for expanding storage in projects requiring high speed and reliability. Version without power adapter and power cable, intended for users with their own power infrastructure.
Description
PCIe adapter board specifically designed for the Raspberry Pi 5, allowing connection of up to four M.2 NVMe SSDs (NVMe protocol only, M-Key connector). It significantly increases read/write speeds compared to traditional microSD cards and supports booting the Raspberry Pi 5 directly from an SSD. The “NP” version does not include a power adapter or power cable.
The adapter communicates with the Raspberry Pi 5 via a 16-pin PCIe (x1 Gen2) connector. It supports SSDs in 2280, 2260, 2242, and 2230 formats. The board includes a DC power input (7–24 V) and a 3-pin interface for powering the Raspberry Pi 5 up to 5 V/5 A. It can also be powered solely from the Raspberry Pi 5. The PCB features LED indicators for drive activity status.
Features
- Compatibility: Raspberry Pi 5
- Interface: PCIe x1 Gen2 (16-pin connector)
- Drive support: 4× M.2 NVMe SSD (M-Key, 2230 / 2242 / 2260 / 2280)
- Power supply: DC 7–24 V via DC jack or from Pi5 (up to 5 V 5 A)
- Indicators: LEDs for monitoring drive activity
- Supports booting Raspberry Pi 5 from SSD
- Pi5 power connector: PH2.0 3-pin
Included in the set
- PCIE TO 4-CH NVME Board (B)
- PH2.0 3-pin cable
- 16P-Cable-40mm ribbon cable
- Screw set
1197705
Data sheet
- Compatible with
- Raspberry Pi 5
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Expansion board with LoRaWAN SX1302 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1302 868M LoRaWAN Gateway HAT
zł513.06
24h
Available quantity: 1
Available
Set with SIMCom 5G SIM8262E-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8262E-M2 5G HAT
zł1,206.14
4 weeks
No product available!
Set with SIMCom 5G SIM8262E-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8262E-M2 5G HAT (with case)
zł1,244.03
24h
Available quantity: 1
Available
HAT module designed for Raspberry Pi minicomputer. Powala adds two RS485 interfaces and one CAN bus to the project. Waveshare RS485 CAN HAT (B)
zł111.92
24h
Available quantity: 7
Available
HAT module designed for Raspberry Pi minicomputer. Powala adds two CAN interfaces to the project. Waveshare 2-CH CAN HAT
zł90.69
24h
Available quantity: 3
Available
The module from SIM7080G is designed for NB-IoT and Cat-M communications. It also enables the use of GNSS systems for positioning. Waveshare SIM7080G Cat-M/NB-IoT HAT (EN)
zł120.11
4 weeks
No product available!
SIMCom 4G SIM7600G-H module kit designed to work with Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H 4G HAT (B)
zł319.00
4 weeks
No product available!
GSM/GNSS expansion module dedicated to Raspberry Pi minicomputers. Allows to equip RPi with LTE Cat-1/3G/2G communication and positioning within GPS, BeiDou, Glonass, GALILEO, QZSS navigation systems. Waveshare SIM7600E LTE Cat-1 HAT
zł248.14
24h
Available quantity: 2
Available
NFC reader module dedicated to the Raspberry Pi. It is based on the PN532 operating in the 13.56 MHz frequency range. Waveshare PN532 NFC HAT
zł96.42
4 weeks
No product available!
Expansion board with LoRa E22-900T22S module for Raspberry Pi. Allows communication in the 868 MHz frequency band. Waveshare SX1262 868M LoRa HAT
zł131.75
4 weeks
No product available!
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1268 433M LoRa HAT
zł95.96
4 weeks
No product available!
A two-channel RS485 expansion module designed for the Raspberry Pi. It uses the TP75176E transceiver and CH432T chip and offers a stable connection between devices. DFRobot DFR0824
zł131.28
24h
Available quantity: 2
Available
The EM060K-GL LTE Cat-6 module kit is designed for use with the Raspberry Pi minicomputer. It supports communication over the high-speed LTE-A network and GNSS positioning. Waveshare EM060K-GL LTE Cat-6 HAT
zł455.69
4 weeks
No product available!
The Quectel 5G RM520N-GL module kit is designed for use with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare RM520N-GL 5G HAT (with case) (EU)
zł1,251.56
24h
Available quantity: 1
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
zł107.82
24h
Available quantity: 8
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT
zł106.85
24h
Available quantity: 4
Available
PCIE TO 4-CH NVME Board (B) NP is a PCIe expansion board for Raspberry Pi 5, allowing connection of up to four NVMe drives, improving system performance and enabling SSD boot. With power supply via Pi5 or an external source and support for multiple M.2 formats, it is ideal for expanding storage in projects requiring high speed and reliability. Version without power adapter and power cable, intended for users with their own power infrastructure.