PCIe-to-USB 3.2 Gen1 HAT for Raspberry Pi 5, 4 plug-and-play ports - Waveshare 26847

The PCIe to M.2 Board (E) adapter for Raspberry Pi 5 enables integration of high-speed NVMe M.2 drives and efficient cooling thanks to a PWM fan and heatsink. Its compact design, compatibility with 2230/2242 formats, and full integration with the Raspberry Pi 5 board make the module ideal for projects that require high disk performance and reliable operation.

4-port HUB module with USB 2.0 interface. Designed for Raspberry Pi Zero. Case included. Waveshare USB-HUB-BOX

The 2-CH CAN MiniPCIe card is a versatile tool for integrating and analyzing CAN bus networks in industrial PCs, development boards, and embedded systems. With isolated channels, broad protocol compatibility, and support for multiple development platforms and operating systems, it is ideal for applications such as automation, automotive systems, CAN network testing, and software development.

The dual-channel PCIe adapter for Raspberry Pi 5 enables simultaneous use of two high-speed M.2 NVMe SSDs, significantly increasing the storage capacity and performance of Pi 5-based systems. The module supports booting from SSD and is ideal for data-intensive applications such as NAS, workstations, data logging systems, or server-based solutions.

Expansion board with GSM/GPRS module designed for Arduino and Raspberry Pi. It uses the Quectel M95 chip, the board has two audio connectors, a microSD slot and a dual SIM slot. A-GSM II Shield

Versatile CAN bus interface based on the MCP2518FD controller, enabling communication in CAN 2.0 and CAN FD modes via SPI interface, compatible with SBC computers, including Raspberry Pi 5, with additional security and the ability to support two modules simultaneously

HAT designed for Raspberry Pi minicomputers with a two-channel RS485 converter. Communication is realized via the SPI interface. The overlay uses a standard 40-pin Raspberry Pi connector. Waveshare 2-CH RS485 HAT

Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. SB Components 22564

The set with the RM500Q-GL module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL 5G HAT (with case) (EU)

PoE M.2 HAT+ (B) is a practical add-on board for Raspberry Pi 5 that enables simultaneous power over Ethernet and installation of a high-performance NVMe SSD. With boot support from the SSD and additional power output terminals, this module is ideal for projects requiring fast storage and reliable power supply, such as servers, surveillance systems, or IoT gateways.

Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)

The KAmod RPI 485&CAN Hat module extends the functionality of Raspberry Pi 5 boards (and others with a 3.3 V SPI interface) with two galvanically isolated RS485 interfaces and one CAN 2.0B interface. The RS485 interfaces are based on the SC16IS752 controller, and the CAN interface on the MCP2515 system. The isolated transceivers used (ADM2483 and TJA1052) increase resistance to interference. Communication takes place via two SPI interfaces, and additional power supply options (from RPi or external 8-32 V) and a stabilized 5 V output allow for flexibility in power supply. The module can be mounted on RPi 5, also with an Active Cooler radiator, and can work with other microcontrollers. The maximum transmission speeds are 500 kbps for RS485 and 1 Mbps for CAN

3-port HUB module with USB 2.0 interface with RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Case included. Waveshare PoE-ETH-USB-HUB-BOX

A 3-port HUB module with a USB 3.2 Gen1 interface with an RJ45 connector designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB Gigabit ETH HAT

HAT module designed for Raspberry Pi minicomputer. Powala adds two RS485 interfaces and one CAN bus to the project. Waveshare RS485 CAN HAT (B)

HAT with 2-channel CAN converter designed for Raspberry Pi minicomputers. The communication was based on the CAN controller MCP2518FD as well as the MCP2562FD transceiver and SPI interface. Waveshare 2-CH CAN FD HAT