PCIe-to-Gigabit Ethernet board (C) for Raspberry Pi 5 - Waveshare 26848

The 4-port HUB module with USB 3.2 interface is designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB HAT

Set with SIMCom 5G SIM8262E-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8262E-M2 5G HAT

The dual-channel PCIe adapter for Raspberry Pi 5 enables simultaneous use of two high-speed M.2 NVMe SSDs, significantly increasing the storage capacity and performance of Pi 5-based systems. The module supports booting from SSD and is ideal for data-intensive applications such as NAS, workstations, data logging systems, or server-based solutions.

Modern SSDs are most commonly equipped with a high-speed NVMe interface, implemented through an NGFF connector with an M-key, known as M.2 M-key. The KAmod USB-PCIE-M2 adapter allows you to connect an M.2 M-key SSD to a computer via a USB port.

KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.

Set with the SIMCom 4G module SIM7600G-H designed to work with the Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H-M2 4G HAT

PCIe TO MiniPCIe GbE USB3.2 HAT+ expansion with EG25-G modem provides reliable LTE connectivity, high-speed data transfer via USB 3.2 ports, and efficient wired Ethernet connection. Dedicated for Raspberry Pi 5, it offers a comprehensive communication solution for industrial projects, edge routers, IoT gateways, and positioning applications.

LTE CAT-1 HAT communication module with integrated GNSS receiver, based on the SimCom A7670E-FASE modem, designed for Raspberry Pi. Enables data transmission in LTE and GSM networks and precise GPS positioning in IoT and industrial applications. KAmod LTE CAT1-GNSS

Board with the NB-IoT SIM7020E module for the Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7020E-NB-IoT HAT

4 Port USB HUB HAT for Raspberry Pi B+, Raspberry Pi 2 B, Rapsberry Pi 3 B; USB to UART Onboard. Waveshare USB HUB HAT

PCIE TO 4-CH NVME Board (B) (US) is a reliable solution for expanding the Raspberry Pi 5 with high-speed data storage using four NVMe drives. Ideal for server applications, workstations, AI projects, and home NAS setups, it offers high performance and comes with a US plug power supply included.

The PCIe To M.2 MINI adapter allows the Raspberry Pi 5 to be expanded with a high-speed NVMe SSD, offering high bandwidth and the ability to boot the system directly from the drive. Its compact form makes the module ideal for projects that require high computing power and fast data access within limited mounting space. It is well-suited for file systems, servers, terminals, and embedded projects using the Raspberry Pi 5.

The PCIe Expansion HAT+ for Gigabit ETH USB3.2 allows the Raspberry Pi 5 to be extended with three high-speed USB 3.2 Gen1 ports and one Gigabit Ethernet connector, using the 16-pin PCIe interface. The device operates without the need for driver installation and offers full support for popular Linux systems. Thanks to additional features such as power monitoring and USB port power control, the module is ideal for advanced networking projects, home servers, and expanded workstations based on the Raspberry Pi 5.

Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare SX1262 868/915M LoRaWAN HAT

Board with the NB-IoT SIM7028 module intended for Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7028-NB-IoT HAT (EN)

Module for Raspberry Pi with two RS485 interfaces, controlled via SPI, featuring galvanic isolation, line protection, and communication support up to 500 kbps