SIM7028 NB-IoT HAT board for Raspberry Pi - Waveshare 25349
ID: 1187933
5906623465996
zł85.47
Tax included
zł69.49 tax excl.
Board with the NB-IoT SIM7028 module intended for Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7028-NB-IoT HAT (EN)
Description
Board with the NB-IoT SIM7028 module designed to work with Raspberry Pi. Supports multiple NB-IoT frequency bands, can be controlled via AT serial commands, and supports communication protocols such as TCP, UDP, LWM2M, COAP, DTLS, DNS, NTP, PING, HTTP(S), MQTT(S), TLS /SSL etc. Due to its low latency, low power consumption and long range, it is an ideal choice for IoT applications. The module is powered by 5 V. It is equipped with an antenna connector, a nano SIM card slot and two diodes indicating the module's operation. Communication takes place via the UART interface. Full documentation with examples is available on the product Wiki page.
Features
- Frequency band: B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B26/B28/B66/B70/B85
- Data transfer rate 159 kbps (download), 127 kbps (upload)
- UART communication interface
- Baud rate 2400 bps to 460900 bps (default 115200bps)
- Communication protocol TCP, UDP, LWM2M, COAP, DTLS, DNS, NTP, PING, HTTP(S), MQTT(S), TLS/SSL
- Power supply: 5V
- Logic level 3.3/5V
- Current consumption in idle mode: 4 mA
- PSM mode: 0.8 uA
- Dimensions 30.5 x 65 mm
Kit contains
- SIM7028-NB-IoT HAT
- GSM antenna
- USB Type A to USB Type C cable
- 2 x 20 pin connector
- Screw set
1187933
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł276.75
Delivery date unknown
No product available!
A mini-computer in version 5 with 4GB of RAM, equipped with two microHDMI ports, 2 USB 3.0 ports, and 2 USB 2.0 ports, as well as a USB-C power connector. The processor is a quad-core Broadcom BCM2712 clocked at 2.4GHz. The board also features dual-band WiFi, Bluetooth 5.0 with BLE support, PCI Express 2.0 interface, and a real-time clock. Raspberry Pi SC1111
zł322.00
24h
Available quantity: 26
Available
Other products in the same category (16)
The 2-CH CAN HAT+ expansion board adds two isolated CAN channels to the Raspberry Pi, with support for further expansion. Featuring the HAT+ standard, galvanic isolation, and surge protection, it is well-suited for industrial, automotive, and automation applications where reliable and safe serial communication is essential.
zł102.25
4 weeks
No product available!
Expansion board with LoRa E22-900T22S module for Raspberry Pi. Allows communication in the 868 MHz frequency band. Waveshare SX1262 868M LoRa HAT
zł129.83
4 weeks
No product available!
KAmod RPi5 M.2 mini allows you to connect NVMe M.2 drives, which allows you to use it as a multimedia center or file server, while maintaining a small size and low power consumption
zł35.90
24h
Available quantity: 135
Available
The PCIe (D) adapter enables the installation of a high-speed M.2 NVMe SSD on the Raspberry Pi 5, offering a significant improvement in read and write speeds compared to microSD cards. It supports system boot from the SSD, making it a suitable solution for performance-demanding projects such as file servers, database systems, or advanced development environments using the Raspberry Pi 5.
zł34.97
24h
Available quantity: 4
Available
The module with the converter USB-UART CP2104 dedicated for minicomputers Raspberry Pi. Adafruit 3589
zł39.53
24h
Available quantity: 1
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
zł112.45
4 weeks
No product available!
The KAmodRPi UART RS485 ISO is an advanced RS485 bus transceiver for the Raspberry Pi, featuring automatic transmission direction control, galvanic isolation, surge protection, and support for up to 128 modules at a transmission speed of up to 500 kbps, powered by 5V with low power consumption
zł67.70
24h
Available quantity: 156
Available
PoE M.2 HAT+ (B) is a practical add-on board for Raspberry Pi 5 that enables simultaneous power over Ethernet and installation of a high-performance NVMe SSD. With boot support from the SSD and additional power output terminals, this module is ideal for projects requiring fast storage and reliable power supply, such as servers, surveillance systems, or IoT gateways.
zł91.39
4 weeks
No product available!
NVMe Base is a reliable solution for expanding storage for the Raspberry Pi 5, ideal for users who require fast data access and large storage capacity. With support for multiple NVMe SSD models and compatibility with the Raspberry Pi 5, it is the perfect addition to projects that demand performance and flexibility. Pimoroni PIM699
zł67.90
4 weeks
No product available!
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1268 433M LoRa HAT
zł95.96
4 weeks
No product available!
The PCIe HAT for 4G/5G modems and USB 3.2 Gen1 enables integration of high-speed cellular connectivity and USB port expansion in Raspberry Pi 5 projects. It supports M.2 Key B standard modems, ensuring compatibility with a wide range of frequencies and SIM card formats. The built-in power monitoring system and HAT+ compliance allow for advanced power management. Ideal for use in industrial routers, IoT gateways, mobile communication systems, and projects requiring fast 4G/5G network access.
zł145.62
24h
Available quantity: 4
Available
PoE M.2 E KEY HAT+ is an add-on board for the Raspberry Pi 5 that enables the connection of M.2 E Key cards with Power over Ethernet (PoE) functionality. Thanks to support for 5 V and 12 V power outputs, dual antenna connectors, and compatibility with popular wireless card standards, the module is well-suited for network projects, IoT applications, and systems requiring stable power supply and high-performance wireless communication.
zł93.96
24h
Available quantity: 2
Available
PCIE TO 4-CH NVME Board (B) (EU) provides significant functionality expansion for the Raspberry Pi 5, enabling the use of high-speed NVMe SSDs. The version with an included power supply offers a ready-to-use solution for applications requiring high data throughput and reliable storage, such as NAS systems, surveillance, or miniature servers.
zł149.60
24h
Available quantity: 2
Available
PCIe TO 2-CH PCIe HAT is a versatile PCIe expansion board for Raspberry Pi 5, enabling simultaneous connection of two PCIe HAT modules. With support for stacked mounting and the PCIe Gen2 standard, it is an ideal solution for testing, expansion, and prototyping devices using Raspberry Pi 5 and high-bandwidth interfaces.
zł62.24
24h
Available quantity: 7
Available
4-port HUB module with USB 2.0 interface designed to work with the Raspberry Pi minicomputer. Waveshare USB HUB HAT (B)
zł25.89
24h
Available quantity: 6
Available
Overlay module for Raspberry Pi with GSM, GPRS, GNSS and Bluetooth
zł124.62
24h
Available quantity: 7
Available
Board with the NB-IoT SIM7028 module intended for Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7028-NB-IoT HAT (EN)