CAN/RS485 HAT module (B) for Raspberry Pi - Waveshare 23227
ID: 1182223
5906623427000
zł106.80
Tax included
zł86.83 tax excl.
HAT module designed for Raspberry Pi minicomputer. Powala adds two RS485 interfaces and one CAN bus to the project. Waveshare RS485 CAN HAT (B)
Description
HAT expansion module dedicated to Raspberry Pi minicomputers, which allows you to add industrial communication buses to your project. The board includes a CAN controller based on the MCP2515 chip and an SPI to CAN converter, as well as two RS485 interfaces using SC16IS752 and SP3485 chips. The built-in power supply circuit allows the use of a source of 8 V to 28 V, and the protection and isolation used ensures proper operation of the device even in the event of signal interference. The module communicates with the Raspberry Pi via an SPI interface with a voltage level of 3.3 V. It will find use in industrial applications for communication between system components. Full documentation is available on the product page.
Features
- Raspberry Pi standard GPIO 40-pin connector
- CAN bus, MCP2515 controller and SPI to CAN transceiver
- CAN speed up to 1 Mbps
- 2 x RS485 interface, SC16IS752 and SP3485 chips
- RS485 communication speed from 300 bps to 921600bps
- Power circuit supports input from 8V to 28V, can simultaneously power Raspberry Pi
- Built-in power supply isolation
- Built-in TVS (Transient Voltage Suppressor) diode, effectively suppresses surges
- Auto-recovery fuse
- Built-in 120Ω resistor, enabled by jumper settings
- Operating voltage: 3,3 V
- Dimensions: 65 x 56.5 mm
Kit contains
- RS485 CAN HAT module (B)
- Female connector 2x20 pins
- Set of screws
1182223
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł162.90
24h
Available quantity: 149
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
24h
Available quantity: 67
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł252.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł348.90
24h
Available quantity: 83
Available
Other products in the same category (16)
PCIe TO PCIe x1 Board (C) with EU power adapter is a practical adapter that enables connecting standard PCIe cards to the Raspberry Pi 5. The dedicated 12 V power supply ensures stable operation of high-demand PCIe devices, and the universal slot supporting x1 to x16 formats offers great flexibility in selecting expansions. It is an ideal solution for building compact systems with network, storage, or industrial interface extensions.
zł57.27
24h
Available quantity: 1
Available
Module with RS232 and RS485 interface dedicated to Raspberry Pi minicomputer. Communication takes place via the SPI interface. Waveshare RS485 RS232 HAT
zł84.85
4 weeks
No product available!
4G/3G/2G communication module and GNSS positioning. It allows making phone calls, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP support and GPS, BeiDou, Glonass, LBS support. Waveshare SIM7600G-H 4G HAT
zł324.42
24h
Available quantity: 3
Available
Adapter in the form of a HAT+ cover for Raspberry Pi 5 enabling the connection of drives, AI accelerators and other modules in the M.2 standard with an M key. The board supports drives in the 2230 and 2242 format and provides transfer speeds of up to 500 MB/s. Raspberry Pi SC1166
zł55.90
24h
Available quantity: 151
Available
3-port HUB module with USB 2.0 interface and RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Waveshare PoE/ETH/USB HUB HAT
zł93.63
24h
Available quantity: 9
Available
HAT module designed for the Raspberry Pi minicomputer. It allows you to add an RS485 interface and a CAN bus to the project, allowing for wired communication of many devices over long distances. SB Components 21444
zł102.90
24h
Available quantity: 1
Available
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)
zł2,909.42
24h
Available quantity: 20
Available
A 3-port HUB module with a USB 3.2 Gen1 interface with an RJ45 connector designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB Gigabit ETH HAT
zł109.88
24h
Available quantity: 2
Available
PoE M.2 HAT+ (B) is a practical add-on board for Raspberry Pi 5 that enables simultaneous power over Ethernet and installation of a high-performance NVMe SSD. With boot support from the SSD and additional power output terminals, this module is ideal for projects requiring fast storage and reliable power supply, such as servers, surveillance systems, or IoT gateways.
zł94.46
24h
Available quantity: 5
Available
SIM7600G-H 4G GbE USB3.2 HAT+ is a comprehensive communication expansion module for the Raspberry Pi 5, offering reliable LTE mobile connectivity, high-speed Ethernet, and additional USB ports. With GNSS support, compatibility with multiple operating systems, and versatile functionality, the module is ideal for IoT applications, industrial routers, and remote monitoring and control systems.
zł330.94
4 weeks
No product available!
Radio module with the RFM69HCW (868 MHz or 915 MHz) system, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4072
zł110.65
24h
Available quantity: 1
Available
PCIe TO MiniPCIe GbE USB3.2 HAT+ is a functional expansion board for the Raspberry Pi 5, enabling integration of high-speed Ethernet, USB 3.2 ports, and the installation of an external 4G module via the MiniPCIe interface. The module supports multiple operating systems and is ready for LTE and GNSS expansion, making it an ideal solution for IoT projects, automation, and industrial communication.
zł113.47
4 weeks
No product available!
Board with the NB-IoT SIM7028 module intended for Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7028-NB-IoT HAT (EN)
zł85.47
24h
Available quantity: 4
Available
The 4-port HUB module with USB 3.2 interface is designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB HAT
zł62.03
24h
Available quantity: 4
Available
Raspberry Pi M.2 HAT+ in compact version enables expansion of the Raspberry Pi 5 with high-speed NVMe drives and other PCIe accessories in M.2 format. The standard version supports 2230 and 2242 formats, while the Compact version supports 2230 format with the option of installation in a dedicated case. The module increases the capabilities of the Raspberry Pi 5 in applications requiring high bandwidth and hardware flexibility. Raspberry SC1771
zł68.90
24h
Available quantity: 194
Available
HAT module for Raspberry Pi that supports global 4G LTE Cat-1 bands. It has a standard 40-pin GPIO connector, supports multiple communication protocols, including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL. It also offers GNSS positioning functions such as GPS, GLONASS, Galileo, and BeiDou. Waveshare SIM7670G LTE Cat-1/GNSS HAT
zł222.48
4 weeks
No product available!
HAT module designed for Raspberry Pi minicomputer. Powala adds two RS485 interfaces and one CAN bus to the project. Waveshare RS485 CAN HAT (B)