zł10,639.61
.png)
New products
New products New products
SX1303 868 MHz LoRaWAN-GNSS expansion HAT for Raspberry Pi - Waveshare 22611
ID: 1181402
zł449.38
Tax included
zł365.35 tax excl.
Expansion board with LoRaWAN SX1303 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1303 868M LoRaWAN Gateway HAT
Description
HAT module with LoRa and GNSS communication dedicated to the Raspberry Pi. The board is equipped with a 40-pin connector allowing for connection with a minicomputer, a Mini-PCIe connector, two SMA antenna connectors and a GNSS L76B module, which allows you to receive data from the main positioning systems: GPS, BDS and QZSS. A board with the LoRa SX1303 module is plugged into the Mini-PCIe connector, which offers long-range transmission with concurrent communication and the FEC (Forward Error Correction) algorithm. The SX1303 supports Fine Timestamp and network positioning based on time difference of arrival (TDOA).
| 1. SX1303 868M LoRaWAN Gateway | 6. Raspberry Pi HAT 40-pin connector |
| 2. Mini-PCIe | 7. GPS antenna connector |
| 3. L76B | 8. LoRa antenna connector |
| 4. RT9193-33 | 9. ML1220 battery socket |
| 5. LED indicators |
The LoRa module uses the SPI or I2C interface, while GNSS communicates via the UART interface. The HAT is powered with 5V via a 40-pin connector. The kit includes the 868M antenna, GPS and necessary cables. Full documentation with the C library is available on the product page.
Features
- LoRa SX1303 module
- Frequency band: EU868 (863-870MHz)
- Modulation: LoRa/(G)FSK
- Transmit power:> 26 dBm @ 5V
- Receiving sensitivity: -141dBm @ 125KHz/SF12, -121dBm @ 125KHz/SF5
- Interface: SPI, I2C
- Connector: Mini-PCIe
- Dimensions: 50.95 x 30 mm
- L76B GNSS module
- Frequency band: GPS L1 (1575.42MHz), BD2 B1 (1561.098MHz)
- Positioning accuracy: <2.5m CEP
- Receiving sensitivity: -148dBm (acquisition), -163dBm (tracking), -160dBm (response)
- Interface: UART
- Power supply: 5V
- Power consumption:
- transmit: 710mA @ 5V GPS on
- reception: 99mA @ 5V GPS enabled
- sleep: 41mA @ 5V GPS off
- Working temperature: -40 to 85 ?
- Dimensions: 65 x 56.5 mm
Kit contains
- SX130x LoRaWAN Gateway HAT
- SX1303 868M LoRaWAN Gateway (B)
- 868M 5dBi antenna
- GPS antenna
- 2x20-pin female connector
- Dual IPEX1 cable
- A set of screws
1181402
Data sheet
- Compatible with
- Raspberry Pi
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł189.00
Delivery date unknown
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł349.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł499.00
24h
Available quantity: 124
Available
Expansion board with LoRaWAN SX1302 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1302 868M LoRaWAN Gateway HAT
zł522.07
24h
Available quantity: 1
Available
Other products in the same category (16)
The 4-port HUB module with USB 3.2 interface is designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB HAT
zł64.64
4 weeks
No product available!
The set with the SIMCom 5G module SIM8202G-M2 designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (EU)
zł1,342.47
4 weeks
No product available!
Expansion board with GSM/GPRS module designed for Arduino and Raspberry Pi. It uses the Quectel M95 chip, the board has two audio connectors, a microSD slot and a dual SIM slot. A-GSM II Shield
zł204.67
6 weeks
No product available!
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
zł39.90
24h
Available quantity: 181
Available
4-port HUB module with USB 2.0 interface designed to work with the Raspberry Pi minicomputer. Waveshare USB HUB HAT (B)
zł28.79
24h
Available quantity: 7
Available
A 3-port HUB module with a USB 2.0 interface with an RJ45 connector, designed to work with the Raspberry Pi minicomputer. Waveshare ETH/USB HUB HAT (B)
zł48.94
24h
Available quantity: 6
Available
A 3-port HUB module with a USB 3.2 Gen1 interface with an RJ45 connector designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB Gigabit ETH HAT
zł112.73
24h
Available quantity: 2
Available
3-port HUB module with USB 2.0 interface and RJ45 connector. Designed for Raspberry Pi Zero. Housing included. Waveshare ETH-USB-HUB-BOX
zł63.30
24h
Available quantity: 21
Available
4-port HUB module with USB 2.0 interface. Designed for Raspberry Pi Zero. Case included. Waveshare USB-HUB-BOX
zł44.67
24h
Available quantity: 5
Available
3-port HUB module with USB 2.0 interface with RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Case included. Waveshare PoE-ETH-USB-HUB-BOX
zł121.99
24h
Available quantity: 3
Available
3-port HUB module with USB 2.0 interface and RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Waveshare PoE/ETH/USB HUB HAT
zł102.16
24h
Available quantity: 5
Available
The module with the converter USB-UART CP2104 dedicated for minicomputers Raspberry Pi. Adafruit 3589
zł39.53
24h
Available quantity: 1
Available
Module with RS232 and RS485 interface dedicated to Raspberry Pi minicomputer. Communication takes place via the SPI interface. Waveshare RS485 RS232 HAT
zł79.56
24h
Available quantity: 3
Available
Set with the SIMCom 4G module SIM7600G-H designed to work with the Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H-M2 4G HAT
zł537.25
4 weeks
No product available!
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)
zł1,307.56
24h
Available quantity: 13
Available
The set with the RM500U-CNV module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks. Waveshare RM500U-CN 5G HAT
zł684.06
4 weeks
No product available!
Expansion board with LoRaWAN SX1303 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1303 868M LoRaWAN Gateway HAT