Clipper HAT Mini - 4G LTE module for Raspberry Pi
ID: 1198991
769894025796
zł218.39
Tax included
zł177.55 tax excl.
Compact 4G LTE HAT for Raspberry Pi, ideal for remote IoT projects operating without Wi-Fi. Includes SIMCom A7683E modem, SIM connector, SMA antenna, user buttons and Qw/ST port for easy expansion. No soldering required and great for mobile or field installations. Pimoroni PIM717
Description
Clipper HAT Mini is a compact expansion module for Raspberry Pi that enables 4G LTE cellular connectivity. It's the perfect solution when you want your project to work reliably anywhere in the world, regardless of WiFi availability. It's ideal for outdoor events, remote locations, or mobile installations such as beehives, boats, or bicycles. Sensor data transmission over a cellular network consumes very little data, so even a small data plan can last a long time.
The HAT features an LTE SIMCom A7683E module, a SIM card slot, an SMA connector for attaching an antenna, and LEDs indicating connection status. Two user buttons provide easy interaction, and the Qw/ST connector allows for quick sensor and extension integration using the Qwiic/STEMMA QT standard. No soldering is required—just plug it into a Raspberry Pi with a 40-pin GPIO header. This is a practical and compact solution for IoT projects that require reliable internet connectivity in harsh environments or far from local networks.
Note!
The kit does not include an antenna. It must be purchased separately.Features
- 4G LTE module: SIMCom A7683E
- Supported bands: LTE-FDD B1/B3/B5/B7/B8/B20/B28
- Operated via AT commands (SIMCom AT-Command Manual)
- SIM card slot
- 2 user buttons (labeled A and B)
- STATUS and NET LEDs indicating module status
- SMA connector for external antenna (antenna sold separately)
- Qw/ST connector (Qwiic/STEMMA QT) for I2C extensions
- Unpopulated pads for speaker and microphone connection
- Pre-soldered female GPIO header (for Raspberry Pi)
- Height with Raspberry Pi Zero 2 W and 10 mm spacers: approx. 23 mm
- Power consumption (VDD): standby 17 mA, sleep mode 0.12–1.63 mA, peak transmission up to 700 mA
- Average current draw during active use: 50–100 mA
- Compatibility: Raspberry Pi (with 40-pin GPIO header)
- Dimensions: 65 x 30 x 17 mm
1198991
Data sheet
- Compatible with
- Raspberry Pi
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Adapter with SMA male connector on both ends. Allows the conversion of a female SMA connection with standard polarity to a male one. SparkFun WRL-21225
zł19.70
24h
Available quantity: 4
Available
Molex LTE/5G external cellular antenna designed for 2G/3G/4G/5G modules and devices. Offers excellent coverage and reliability with high performance and gain. SparkFun CEL-16432
zł48.90
Delivery date unknown
No product available!
A mini-computer in version 5 with 4GB of RAM, equipped with two microHDMI ports, 2 USB 3.0 ports, and 2 USB 2.0 ports, as well as a USB-C power connector. The processor is a quad-core Broadcom BCM2712 clocked at 2.4GHz. The board also features dual-band WiFi, Bluetooth 5.0 with BLE support, PCI Express 2.0 interface, and a real-time clock. Raspberry Pi SC1111
zł388.00
24h
Available quantity: 466
Available
A mini-computer in version 5 with 8GB of RAM, equipped with two microHDMI ports, 2 USB 3.0 ports, and 2 USB 2.0 ports, as well as a USB-C power connector. The processor is a quad-core Broadcom BCM2712 clocked at 2.4GHz. The board also features dual-band WiFi, Bluetooth 5.0 with BLE support, PCI Express 2.0 interface, and a real-time clock. Raspberry Pi SC1111
zł575.00
24h
Available quantity: 192
Available
SMA male-female antenna extension cable 30 cm made of RG316 cable with an impedance of 50 Ω, designed for antenna connections in RF and IoT systems, provides stable transmission up to 3 GHz and interference immunity
zł17.77
Delivery date unknown
No product available!
Other products in the same category (16)
HAT designed for Raspberry Pi minicomputers with a two-channel RS485 converter. Communication is realized via the SPI interface. The overlay uses a standard 40-pin Raspberry Pi connector. Waveshare 2-CH RS485 HAT
zł84.41
4 weeks
No product available!
PCIe TO MiniPCIe GbE USB3.2 HAT+ is a functional expansion board for the Raspberry Pi 5, enabling integration of high-speed Ethernet, USB 3.2 ports, and the installation of an external 4G module via the MiniPCIe interface. The module supports multiple operating systems and is ready for LTE and GNSS expansion, making it an ideal solution for IoT projects, automation, and industrial communication.
zł115.76
24h
Available quantity: 1
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
zł105.24
24h
Available quantity: 10
Available
SIMCom 4G SIM7600G-H module kit designed to work with Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H 4G HAT (B)
zł348.52
4 weeks
No product available!
A two-channel RS485 expansion module designed for the Raspberry Pi. It uses the TP75176E transceiver and CH432T chip and offers a stable connection between devices. DFRobot DFR0824
zł131.28
24h
Available quantity: 3
Available
PCIe expansion module for Raspberry Pi 5 with four 2.5G Ethernet RJ45 ports, operating in plug and play mode without driver installation, compatible with Raspberry Pi OS. Waveshare PCIE TO 4-CH 2.5G ETH Board (B)
zł210.17
6 weeks
No product available!
4-port HUB module with USB 2.0 interface. Designed for Raspberry Pi Zero. Case included. Waveshare USB-HUB-BOX
zł42.95
24h
Available quantity: 5
Available
Radio module with the RFM69HCW (868 MHz or 915 MHz) system, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4072
zł110.65
4 weeks
No product available!
PCIe TO 2.5G ETH Board (C) designed for Raspberry Pi 5, enabling expansion with a 2.5G Ethernet port. Supports Raspberry Pi OS, operates driver-free, and works in plug and play mode. The RTL8125 controller and PCIe interface ensure straightforward integration and high network throughput. Waveshare PCIe TO 2.5G ETH Board (C)
zł44.32
6 weeks
No product available!
PCIe TO M.2 USB ETH HAT+ Add-on Board – Expansion for Raspberry Pi 5 providing USB 3.2 ports, 2.5G Ethernet, and an M.2 slot for high-speed NVMe drives. Enables significant operational and communication performance upgrades for embedded systems and Raspberry Pi-based servers.
zł189.22
24h
Available quantity: 3
Available
Versatile CAN bus interface based on the MCP2518FD controller, enabling communication in CAN 2.0 and CAN FD modes via SPI interface, compatible with SBC computers, including Raspberry Pi 5, with additional security and the ability to support two modules simultaneously
zł69.77
24h
Available quantity: 108
Available
This adapter allows you to connect two SATA 3.0 drives to the Raspberry Pi 5 via a 16-pin PCIe interface. The device operates as a HAT+ and is automatically detected by the Raspberry Pi OS without the need for driver installation. It supports 2.5" and 3.5" drives, offers speeds of up to 6 Gb/s, and is fully compliant with AHCI 1.2 and NCQ. Ideal for building NAS servers, data storage systems, and IoT projects. Waveshare 31882
zł77.74
6 weeks
No product available!
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)
Regular pricezł2,909.42zł1,275.58
24h
Available quantity: 17
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT
zł106.85
24h
Available quantity: 5
Available
PCIe to M.2 adapter that allows you to connect M.2 NVMe SSD drives to Raspberry Pi 5 minicomputers. It works with M.2 SSD drives of sizes 2230/2242 and connects to the minicomputer via a 16-pin PCIe ribbon. Waveshare PCIe TO M.2 HAT+
zł29.93
24h
Available quantity: 12
Available
HAT module for Raspberry Pi that supports global 4G LTE Cat-1 bands. It has a standard 40-pin GPIO connector, supports multiple communication protocols, including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL. It also offers GNSS positioning functions such as GPS, GLONASS, Galileo, and BeiDou. Waveshare SIM7670G LTE Cat-1/GNSS HAT
zł197.88
24h
Available quantity: 2
Available
Compact 4G LTE HAT for Raspberry Pi, ideal for remote IoT projects operating without Wi-Fi. Includes SIMCom A7683E modem, SIM connector, SMA antenna, user buttons and Qw/ST port for easy expansion. No soldering required and great for mobile or field installations. Pimoroni PIM717