PCIe HAT+ with 4G EG25-G modem for Raspberry Pi 5 - Waveshare 28557
ID: 1197433
5902186321540
zł328.78
Tax included
zł267.30 tax excl.
PCIe TO MiniPCIe GbE USB3.2 HAT+ expansion with EG25-G modem provides reliable LTE connectivity, high-speed data transfer via USB 3.2 ports, and efficient wired Ethernet connection. Dedicated for Raspberry Pi 5, it offers a comprehensive communication solution for industrial projects, edge routers, IoT gateways, and positioning applications.
Description
The PCIe TO MiniPCIe GbE USB3.2 HAT+ expansion with preinstalled Quectel EG25-G mPCIe modem enables the Raspberry Pi 5 to be extended with 4G LTE connectivity, Gigabit Ethernet, and two high-speed USB 3.2 Gen1 ports. Compatible with the Raspberry Pi 5 PCIe interface and HAT+ standard, this solution offers global LTE/3G/2G band compatibility, GNSS support, and is compatible with multiple operating systems including Raspberry Pi OS, Ubuntu, and OpenWRT. The board features a MiniPCIe slot, Nano SIM card slot, RJ45 connector, USB Type-C interface, and power monitoring and EEPROM chips. It enables fast mobile network connectivity and precise GPS positioning for IoT projects and edge devices.
Features
- Built-in EG25-G mPCIe modem (LTE Cat-4) with global frequency band support
- LTE-FDD data rates: up to 150 Mbps (DL) / 50 Mbps (UL)
- GNSS support: GPS, BeiDou, GLONASS, GALILEO, QZSS
- Two USB 3.2 Gen1 ports (5 Gb/s) via VL805 PCIe–USB bridge
- Gigabit Ethernet port based on RTL8153B chip
- MiniPCIe slot for modem, Nano SIM slot
- PCIe 16-pin interface to Raspberry Pi 5 (40 mm cable included)
- USB-C connector for power, firmware updates, or PC communication
- EEPROM for HAT identification and INA219 chip for power monitoring
- Supported systems: Raspberry Pi OS, Ubuntu, OpenWRT
- DIP switches for modem power control and USB signal direction
- Power and network status indicators
Included
- PCIe TO MiniPCIe GbE USB3.2 HAT+ with mounted EG25-G mPCIe x1
- PCIe 16P 40 mm cable x1
- Ethernet cable ~1.5 m x1
- Screw set x1
- LTE antennas (2 pcs) x1
- Passive GPS antenna x1
- SMA–IPEX-1 cables (3 pcs) x1
1197433
Data sheet
- Compatible with
- Raspberry Pi 5
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
The 4-port HUB module with USB 3.2 interface is designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB HAT
zł61.75
24h
Available quantity: 4
Available
The set with the SIMCom 5G module SIM8202G-M2 designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (EU)
zł1,487.92
4 weeks
No product available!
Expansion board with GSM/GPRS module designed for Arduino and Raspberry Pi. It uses the Quectel M95 chip, the board has two audio connectors, a microSD slot and a dual SIM slot. A-GSM II Shield
zł204.67
6 weeks
No product available!
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
zł39.90
24h
Available quantity: 83
Available
4-port HUB module with USB 2.0 interface designed to work with the Raspberry Pi minicomputer. Waveshare USB HUB HAT (B)
zł25.71
4 weeks
No product available!
A 3-port HUB module with a USB 2.0 interface with an RJ45 connector, designed to work with the Raspberry Pi minicomputer. Waveshare ETH/USB HUB HAT (B)
zł45.74
24h
Available quantity: 11
Available
A 3-port HUB module with a USB 3.2 Gen1 interface with an RJ45 connector designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB Gigabit ETH HAT
zł109.88
24h
Available quantity: 2
Available
3-port HUB module with USB 2.0 interface and RJ45 connector. Designed for Raspberry Pi Zero. Housing included. Waveshare ETH-USB-HUB-BOX
zł57.60
24h
Available quantity: 7
Available
4-port HUB module with USB 2.0 interface. Designed for Raspberry Pi Zero. Case included. Waveshare USB-HUB-BOX
zł42.95
24h
Available quantity: 5
Available
3-port HUB module with USB 2.0 interface with RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Case included. Waveshare PoE-ETH-USB-HUB-BOX
zł115.26
24h
Available quantity: 2
Available
3-port HUB module with USB 2.0 interface and RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Waveshare PoE/ETH/USB HUB HAT
zł94.38
24h
Available quantity: 5
Available
The module with the converter USB-UART CP2104 dedicated for minicomputers Raspberry Pi. Adafruit 3589
zł39.53
24h
Available quantity: 1
Available
Module with an RFID reader designed to work with the Raspberry Pi. Equipped with an OLED display and a buzzer. SB Components 20003
zł131.13
24h
Available quantity: 1
Available
Module with RS232 and RS485 interface dedicated to Raspberry Pi minicomputer. Communication takes place via the SPI interface. Waveshare RS485 RS232 HAT
zł76.42
24h
Available quantity: 2
Available
Set with the SIMCom 4G module SIM7600G-H designed to work with the Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H-M2 4G HAT
zł370.71
4 weeks
No product available!
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)
Regular pricezł2,909.42zł1,275.58
24h
Available quantity: 16
Available
PCIe TO MiniPCIe GbE USB3.2 HAT+ expansion with EG25-G modem provides reliable LTE connectivity, high-speed data transfer via USB 3.2 ports, and efficient wired Ethernet connection. Dedicated for Raspberry Pi 5, it offers a comprehensive communication solution for industrial projects, edge routers, IoT gateways, and positioning applications.