New products
New products New products
zł119.00
Delivery date unknown
zł119.00
Delivery date unknown
SIM7600G-H 4G HAT kit (B) for Raspberry Pi - Waveshare 19485
ID: 1182332
zł348.52
Tax included
zł283.35 tax excl.
SIMCom 4G SIM7600G-H module kit designed to work with Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H 4G HAT (B)
Description
SIMCom 4G SIM7600G-H module kit designed to work with Raspberry Pi minicomputer. It provides communication in 4G networks with compatibility in 2G and 3G networks. The user can use such communication protocols as TCP, HTTP(S) and MQTT. It also supports RNDIS dial-up over USB on Windows or Linux with download speeds of up to 150 Mbps and upload speeds of up to 50 Mbps. Among the device's features will be GNSS positioning capability with support for GPS, Beidou and Glonass. The DTU's parameters are configured via dedicated PC software or via a cloud service.
The board features a USB port, audio jack and SIM card slot. The kit is connected to the Raspberry Pi via a pin or USB connector.
The kit comes with cables and antennas. Full documentation is available on the product wiki page.
Features
- 4G band: LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 LTE-TDD: B34, B38, B39, B40, B41
- 3G band: UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19
- GNSS: GPS, Beidou, GLONASS, Galileo, QZSS
- 2G bandwidth: GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz
- Data rate:
- 4G (LTE Cat-4) 150 Mb / s (download) / 50 Mb / s (upload)
- 3G (HSPA +) 42 Mb / s (download) / 5.76 Mb / s (upload)
- 2G (EDGE) 236.8 Kb / s (download) / 236.8 Kb / s (upload)
- 2G (GPRS) 85.6 Kb / s (download) / 85.6 Kb / s (upload)
- Communication protocol: TCP, UDP, RNDIS, Modbus, HTTP(S), MQTT
- TCP/UDP, Modbus, HTTP(S), MQTT mode
- SMS supports MT, MO, CB, Text, PDU
- SIM card
- Antenna connector
- 5 V power supply
- Module dimensions 65 x 32 mm
Kit contains
- SIM7600G-H 4G HAT (B)
- LTE antenna
- GPS antenna
- USB cable
- Screw package
1182332
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł276.75
24h
Available quantity: 64
Available
Miniature version of the Raspberry Pi computer equipped with SiP BCM2710A1 - 4x ARM Cortex-A53 1GHz twin with Raspberry Pi 3 and 512 MB of RAM and wireless connectivity WiFi 802.11 b / g / n + Bluetooth 4.2 / BLE
zł78.90
24h
Available quantity: 2267
Available
Other products in the same category (16)
The PCIe TO 2-CH M.2 HAT+ expands the functionality of the Raspberry Pi 5 by enabling the installation of two NVMe SSDs, offering significantly improved read/write performance and the option to boot from disk. With its compact design, support for 2230/2242 form factors, and built-in power monitoring, the adapter is well-suited for server solutions, NAS projects, multimedia systems, and advanced industrial applications.
zł71.68
24h
Available quantity: 3
Available
The PCIe TO M.2 HAT+ Acce A kit with a 128 GB SSD is a ready-to-use solution that expands the Raspberry Pi 5 with fast NVMe storage, providing enhanced performance and the ability to boot from the drive. With its compact design, power monitoring support, and compatibility with 2230/2242 form factors, the kit is ideal for building home servers, NAS systems, workstations, and projects requiring high data throughput.
zł147.88
24h
Available quantity: 1
Available
Board with the NB-IoT SIM7020E module for the Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7020E-NB-IoT HAT
zł82.80
24h
Available quantity: 3
Available
HAT designed for Raspberry Pi minicomputers with a two-channel RS485 converter. Communication is realized via the SPI interface. The overlay uses a standard 40-pin Raspberry Pi connector. Waveshare 2-CH RS485 HAT
zł84.41
24h
Available quantity: 11
Available
SIM7000E NB-IoT HAT is a module that extends the capabilities of Raspberry Pi for communication via GSM / GPRS cellular networks based on Simcom Sim7000E. It has support for NB-IoT, eMTC, EDGE, GPRS and GNSS. Waveshare SIM7000E NB-IoT HAT
zł155.90
24h
Available quantity: 3
Available
Modern SSDs are most commonly equipped with a high-speed NVMe interface, implemented through an NGFF connector with an M-key, known as M.2 M-key. The KAmod USB-PCIE-M2 adapter allows you to connect an M.2 M-key SSD to a computer via a USB port.
zł78.15
24h
Available quantity: 131
Available
Expansion board with LoRaWAN SX1303 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1303 868M LoRaWAN Gateway HAT
zł479.63
4 weeks
No product available!
Expansion board with LoRaWAN SX1302 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1302 868M LoRaWAN Gateway HAT
zł497.40
24h
Available quantity: 1
Available
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)
zł2,909.42
24h
Available quantity: 17
Available
Expansion board with LoRa E22-900T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. SB Components 22571
zł153.57
4 weeks
No product available!
The set with the SIMCom 5G module SIM8202G-M2 designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (EU)
zł1,487.92
4 weeks
No product available!
Set with SIMCom 5G SIM8262E-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8262E-M2 5G HAT
zł1,206.14
4 weeks
No product available!
The 4-port HUB module with USB 3.2 interface is designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB HAT
zł61.75
24h
Available quantity: 6
Available
GSM/GNSS expansion module dedicated to Raspberry Pi minicomputers. Allows to equip RPi with LTE Cat-1/3G/2G communication and positioning within GPS, BeiDou, Glonass, GALILEO, QZSS navigation systems. Waveshare SIM7600E LTE Cat-1 HAT
zł254.56
24h
Available quantity: 2
Available
The KAmod RPI 485&CAN Hat module extends the functionality of Raspberry Pi 5 boards (and others with a 3.3 V SPI interface) with two galvanically isolated RS485 interfaces and one CAN 2.0B interface. The RS485 interfaces are based on the SC16IS752 controller, and the CAN interface on the MCP2515 system. The isolated transceivers used (ADM2483 and TJA1052) increase resistance to interference. Communication takes place via two SPI interfaces, and additional power supply options (from RPi or external 8-32 V) and a stabilized 5 V output allow for flexibility in power supply. The module can be mounted on RPi 5, also with an Active Cooler radiator, and can work with other microcontrollers. The maximum transmission speeds are 500 kbps for RS485 and 1 Mbps for CAN
zł102.78
24h
Available quantity: 92
Available
SIM7600G-H 4G GbE USB3.2 HAT+ is a comprehensive communication expansion module for the Raspberry Pi 5, offering reliable LTE mobile connectivity, high-speed Ethernet, and additional USB ports. With GNSS support, compatibility with multiple operating systems, and versatile functionality, the module is ideal for IoT applications, industrial routers, and remote monitoring and control systems.
zł330.94
4 weeks
No product available!
SIMCom 4G SIM7600G-H module kit designed to work with Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H 4G HAT (B)