SX1262 868/915 MHz LoRaWAN/GNSS HAT expansion board for Raspberry Pi - Waveshare 24654
ID: 1185451
5906623427772
zł112.45
Tax included
zł91.42 tax excl.
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
Description
An expansion board with LoRa Node SX1262 and GNSS L76K module designed for Raspberry Pi minicomputers. The SX1262 chip supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. The L76K module can receive data from the main positioning systems: GPS, GLONASS, Beidou (BDS) and QZSS. It features fast operation, high accuracy and low power consumption. Also located on the bottom of the board is an ML1220 battery back-up socket, which significantly speeds up the device's start-up after a temporary power failure. The user has the option to connect an external LoRa and GNSS antenna via the IPEX connector. The module is connected to the Raspberry Pi via a dedicated 40-pin GPIO connector. It will find use in industrial applications, measurement data acquisition and smart home projects. Full documentation is available on the product wiki page.
| 1. LoRa SX1262 Module | 6. IPEX GNSS connector |
| 2. GNSS L76K Module | 7. IPEX LoRa connector |
| 3. LDO 3,3 V | 8. LED Indicators |
| 4. GPS Standby mode on/off | 9. GPIO 40-pin header |
| 5. SET button | 10. Communication header |
Features
- SX1262 chip
- Frequency band: HF 850 to 930 MHz
- Modulation: LoRa/(G)FSK
- LoRa communication speed: 0.018 to 62.5Kbps, (G)FSK: 0.6 to 300Kbps
- Transmission power: 22dBm@3.3V
- Spreading factor: SF7 ~ SF12
- Communication bus: SPI
- GPIO 40-pin connector
- Supply voltage: 3.3V
- Current consumption when transmitting: 107mA@22dBm
- Current consumption when receiving: 5.3mA@125KHz
- Operating temperature: 0 to 50℃
- L76K chip:
- GNSS systems support: GPS, GLONASS, BDS, QZSS
- L1 band: 32 tracking channels/72 receive channels
- A-GNSS support
- Receive sensitivity: -148dBm, -160dBm, -162dBm (acquisition, re-acquisition, tracking)
- Time to first position fix: 30 s (cold start), 5.5 s (with AGNSS)
- Positioning accuracy: 2 m
- UART speed range: 4800 to 115200bps (default 9600bps)
- Measurement frequency: up to 5 Hz (default 1 Hz)
- Battery socket ML1220
- Dimensions: 65 x 30.5 mm
Kit contains
- SX1262 868/915M LoRaWAN HAT module
- 868/915 MHz CB Antenna
- GNSS ANtenna
- 2 x IPEX to SMA adapter
- Set of screws
- Female connector 2x20-pin
1185451
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł162.90
24h
Available quantity: 106
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł276.75
Delivery date unknown
No product available!
Other products in the same category (16)
PoE HAT+ M.2 E Key Acce A PCIe with Wireless-AX210 and antennas for Raspberry Pi 5 - Waveshare 30396
The PoE M.2 E KEY HAT+ Acce A kit expands the capabilities of the Raspberry Pi 5 with modern communication interfaces and Power over Ethernet (PoE) power supply. It enables the use of the Intel AX210 wireless module with support for Wi-Fi 6E and Bluetooth 5.3, providing fast and stable network access as well as wireless connectivity. With 5 V and 12 V power outputs, the adapter also serves as a power source for additional modules and devices in networking, industrial, and IoT projects.
zł178.14
24h
Available quantity: 2
Available
The PCIe To M.2 MINI adapter allows the Raspberry Pi 5 to be expanded with a high-speed NVMe SSD, offering high bandwidth and the ability to boot the system directly from the drive. Its compact form makes the module ideal for projects that require high computing power and fast data access within limited mounting space. It is well-suited for file systems, servers, terminals, and embedded projects using the Raspberry Pi 5.
zł23.19
24h
Available quantity: 1
Available
3-port HUB module with USB 2.0 interface and RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Waveshare PoE/ETH/USB HUB HAT
zł93.63
4 weeks
No product available!
PCIe to M.2 (E) adapter with fan for Raspberry Pi 5 compatible with NVMe 2230/2242 - Waveshare 28013
The PCIe to M.2 Board (E) adapter for Raspberry Pi 5 enables integration of high-speed NVMe M.2 drives and efficient cooling thanks to a PWM fan and heatsink. Its compact design, compatibility with 2230/2242 formats, and full integration with the Raspberry Pi 5 board make the module ideal for projects that require high disk performance and reliable operation.
zł55.30
4 weeks
No product available!
PCIe To M.2 E KEY HAT+ adapter expands the capabilities of the Raspberry Pi 5 with support for high-speed Wi-Fi/Bluetooth network cards in M.2 E Key format. It supports direct PCIe connection and Bluetooth integration via USB. Robust antenna connectors and compliance with the HAT+ standard make it an ideal solution for IoT projects, network gateways, and compact routers based on the Raspberry Pi 5.
zł36.97
24h
Available quantity: 3
Available
HAT module designed for Raspberry Pi minicomputer. Powala adds two CAN interfaces to the project. Waveshare 2-CH CAN HAT
zł89.25
24h
Available quantity: 3
Available
The set with the RM500U-CNV module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks. Waveshare RM500U-CN 5G HAT
zł938.97
4 weeks
No product available!
Expansion board with LoRa E22-900T22S module for Raspberry Pi. Allows communication in the 868 MHz frequency band. Waveshare SX1262 868M LoRa HAT
zł129.83
4 weeks
No product available!
The KAmodRPi5 PCIe-M.2 adapter allows you to easily connect an NVME SSD to a Raspberry Pi 5 computer, ensuring universal installation, communication via the PCI Express interface, stable power supply voltage and LED indicators, while maintaining compatibility with HAT modules and official cooling
zł57.90
24h
Available quantity: 18
Available
Module dedicated to Raspberry Pi, which supports various wireless communication modes, such as LTE-TDD, LTE-FDD, GSM, GPRS and EDGE. With download speeds of up to 10Mbps and upload speeds of up to 5Mbps, this module is perfect for IoT applications such as remote information processing, device monitoring, POS terminals, industrial routers, remote diagnostics and satellite positioning. Waveshare A7670E Cat-1/GNSS HAT
zł128.35
24h
Available quantity: 6
Available
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1262 433/470M LoRaWAN HAT
zł68.25
24h
Available quantity: 3
Available
Board with the NB-IoT SIM7020E module for the Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7020E-NB-IoT HAT
zł82.80
24h
Available quantity: 3
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT
zł107.45
24h
Available quantity: 2
Available
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare SX1262 868/915M LoRaWAN HAT
zł68.15
4 weeks
No product available!
The PCIE TO M.2 E KEY HAT+ Acce A kit enables the expansion of Raspberry Pi 5 with a fast and modern network interface based on the Intel Wireless-AX210 module, supporting Wi-Fi 6E and Bluetooth 5.3. Thanks to the HAT+ standard, two SMA antenna connectors, and the ability to transmit Bluetooth signals via USB, the adapter is suitable for communication projects, home servers, and IoT systems requiring high-performance wireless connectivity.
zł116.86
24h
Available quantity: 2
Available
HAT with 2-channel CAN converter designed for Raspberry Pi minicomputers. The communication was based on the CAN controller MCP2518FD as well as the MCP2562FD transceiver and SPI interface. Waveshare 2-CH CAN FD HAT
zł195.82
24h
Available quantity: 1
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT