Main view
search
  • Main view
  • Main view (rotated)
  • Full set
ID: 1199318
5902186334939
zł178.42
Tax included

zł145.06 tax excl.

Industrial RS485 to Ethernet converter equipped with PoE power support compliant with the IEEE 802.3af/at standard. The device enables integration of RS485-based systems with Ethernet networks, offering data transmission up to 1 Mbps, TCP and UDP communication, 1 kV galvanic isolation, and configuration through a built-in web interface. PoE support allows both power and data to be delivered through a single network cable. MODIG MD12003

24h
Available
Available quantity: 93

Description

Industrial converter designed for bidirectional data transmission between an RS485 bus and an Ethernet network. The design enables integration of PLC controllers, telemetry devices, measurement systems, building automation equipment, and industrial devices using RS485 communication with Ethernet-based network infrastructure. Communication is provided through a 10/100 Mbps Full Duplex RJ45 interface with support for TCP and UDP protocols.

                                                                  p1199318-RS485-ETHERNET_PoE_main_schem.jpg

The RS485 interface features full 1 kV galvanic isolation, surge protection, and a configurable 120 Ω termination resistor. The device supports half-duplex communication at speeds ranging from 200 bps to 1 Mbps, allowing connection of up to 64 devices on a single RS485 bus. The built-in data conversion mechanism enables transparent transmission of RS485 frames over Ethernet, including fragmentation support for data packets up to 4096 bytes.

The converter is equipped with a Phoenix Contact MC 3.81 mm screw terminal with A+, B-, GND, and TERM connections, an RJ45 port, and a USB-C interface used for diagnostics, configuration, and firmware updates. Configuration is performed through a password-protected web interface that allows network parameter setup and real-time device monitoring. The design supports PoE power compliant with IEEE 802.3af/at Class 0 and additionally allows powering the device from a 7-38 V DC supply or via USB-C as a backup power source. The aluminum enclosure increases mechanical durability and facilitates deployment in industrial environments.

Features

  • Industrial RS485 to Ethernet converter
  • PoE power supply compliant with IEEE 802.3af/at Class 0
  • 10/100 Mbps Full Duplex Ethernet interface
  • RJ45 port
  • IPv4 protocol support
  • Static IP address or DHCP
  • Configurable MAC address
  • Operating modes: TCP Server, TCP Client, UDP, UDP Broadcast
  • RS485 interface on Phoenix Contact MC 3.81 mm connector
  • RS485 connections: A+, B-, GND, TERM
  • RS485 half-duplex communication
  • RS485 data rate from 200 bps to 1 Mbps
  • Supports up to 64 devices on the RS485 bus
  • 1 kV galvanic isolation
  • Surge protection for the RS485 interface
  • Configurable 120 Ω termination resistor
  • Maximum RS485 frame size: 4096 bytes
  • Configuration through built-in web interface
  • Real-time diagnostics via USB or web interface
  • Firmware updates via USB
  • USB-C port for diagnostics and firmware updates
  • Additional power input: 7-38 V DC
  • Backup power via USB-C (5 V DC)
  • Aluminum enclosure
  • LED status and communication indicators
  • Operating temperature: -20°C to +50°C
  • Dimensions: 92 × 80 × 25 mm

Kit includes

  • MODIG RS485-ETHERNET PoE converter
  • USB-A to USB-C cable
1199318

Other products in the same category (16)