RS232/485 TO ETH (for EU) - converter RS232/485 - Ethernet

Description

A converter that provides easy communication between the RS232 or RS485 interface and RJ45 Ethernet. The module is based on a 32-bit microcontroller with the ARM-Cortex M4 core. The device can work as a TCP server, TCP client, UDP server, UDP client or HTTPD client (supports GET and POST) and is configured using a website or AT commands. The converter has built-in reverse polarity protection and ESD protection. Full documentation is available on the product Wiki page.

Features

• 32-bit ARM processor from the M4 series with a frequency of up to 120 MHz
• 10/100M Auto-MDI/MDIX Ethernet interface
• The RS232 and RS485 interface allows independent operation at the same time, without interfering with each other
• Multiple indicators to monitor communication and work status
• Available operating modes: TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client (GET and POST support)
• Supports Modbus
• Supports Websocket
• Configurable via website, AT commands, serial protocol and network protocol, provides a configuration protocol that can be integrated with your own software
• It supports a protocol similar to RFC2217
• KeepAlive mechanism, detects broken connection, automatic reconnection
• Supports restart after timeout (no data restart), provides long-term stable connection, configurable restart time
• Supports DNS domain name resolution, customizable DNS server
• Supports DHCP, auto-obtained IP address, or static IP address
• Firmware can be updated over the network
• Shipped with a default MAC address which can be customized
• Supplied software: module configuration software, TCP/UDP testing tool, VCOM virtual serial port software
• Ethernet:
  • Connector: 4-pin RJ45
  • Communication speed: 10/100 Mb/s
  • Interface protection: 2 kV electromagnetic isolation
  • Protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client, Websocket
  • TX cache: 16KB
  • RX Cache: 16KB
• RS232/RS485:
  • RS485 connector: screw terminal (A+, B-, GND)
  • RS232 connector: DB9
  • Data bits: 5 bits, 6 bits, 7 bits, 8 bits
  • Stop bits: 1, 2
  • Parity bit: none, odd, even, sign, space
  • Transmission speed: 600 bps to 230.4 kbps
  • TX and RX cache: 2 KB
  • Hardware flow control: RTS, CTS
  • RS485 interface protection: 2KV ESD protection, RS485 pull up/down registers: 2.2 kΩ
• Voltage: 5 to 36V (5V recommended)
• Working current: 86.5 mA (at 5V)
• Power consumption: <1 W
• Reverse polarity protection, ESD protection, anti-overvoltage
• Working temperature: -25 to 85 ° C
• Storage temperature: -40 to 105 ° C
• Dimensions: 85.7 x 82.76 x 25.2 mm

Kit contains

• RS232/485 converter - Ethernet
• 5V EU power supply
• Ethernet cable
• Male-to-Female serial cable
• Female-to-Female serial cable