zł82.44 tax excl.
The 2-CH CAN HAT+ expansion board adds two isolated CAN channels to the Raspberry Pi, with support for further expansion. Featuring the HAT+ standard, galvanic isolation, and surge protection, it is well-suited for industrial, automotive, and automation applications where reliable and safe serial communication is essential.
The 2-CH CAN HAT+ is an expansion board with two independent CAN bus channels designed for Raspberry Pi boards. Built on the HAT+ standard, it connects directly to Raspberry Pi 5, 4, 3, and Zero. It features two separate chipsets — the MCP2515 controller and the SN65HVD230 transceiver — to ensure stable, isolated CAN communication. The board supports stackable expansion with other CAN modules, allowing system growth up to four channels.
Integrated surge protection, galvanic signal isolation, and a wide input voltage range (7–36 V) make it a reliable solution for industrial applications that demand high robustness.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
NFC reader module dedicated to the Raspberry Pi. It is based on the PN532 operating in the 13.56 MHz frequency range. Waveshare PN532 NFC HAT
No product available!
Expansion board with LoRa E22-900T22S module for Raspberry Pi. Allows communication in the 868 MHz frequency band. Waveshare SX1262 868M LoRa HAT
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1268 433M LoRa HAT
No product available!
A two-channel RS485 expansion module designed for the Raspberry Pi. It uses the TP75176E transceiver and CH432T chip and offers a stable connection between devices. DFRobot DFR0824
The EM060K-GL LTE Cat-6 module kit is designed for use with the Raspberry Pi minicomputer. It supports communication over the high-speed LTE-A network and GNSS positioning. Waveshare EM060K-GL LTE Cat-6 HAT
No product available!
The Quectel 5G RM520N-GL module kit is designed for use with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare RM520N-GL 5G HAT (with case) (EU)
No product available!
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1262 433/470M LoRaWAN HAT
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare SX1262 868/915M LoRaWAN HAT
No product available!
HAT module designed for the Raspberry Pi minicomputer. It allows you to add an RS485 interface and a CAN bus to the project, allowing for wired communication of many devices over long distances. SB Components 21444
The KAmodRPi UART RS485 ISO is an advanced RS485 bus transceiver for the Raspberry Pi, featuring automatic transmission direction control, galvanic isolation, surge protection, and support for up to 128 modules at a transmission speed of up to 500 kbps, powered by 5V with low power consumption
Board with the NB-IoT SIM7028 module intended for Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7028-NB-IoT HAT (EN)
BTT U2C V2.1 is a versatile CAN Bus adapter, ideal for integration with Raspberry Pi. With ESD protection, a durable PCB surface, and support for firmware updates, it is a reliable solution for stable communication in 3D printing projects. BIGTREETECH U2C V2.1
The KAmodRPi5 PCIe-M.2 adapter allows you to easily connect an NVME SSD to a Raspberry Pi 5 computer, ensuring universal installation, communication via the PCI Express interface, stable power supply voltage and LED indicators, while maintaining compatibility with HAT modules and official cooling
PCIe to M.2 adapter that allows you to connect M.2 NVMe SSD drives to Raspberry Pi 5 minicomputers. It works with M.2 SSD drives of sizes 2230/2242 and connects to the minicomputer via a 16-pin PCIe ribbon. Waveshare PCIe TO M.2 HAT+
The 2-CH CAN HAT+ expansion board adds two isolated CAN channels to the Raspberry Pi, with support for further expansion. Featuring the HAT+ standard, galvanic isolation, and surge protection, it is well-suited for industrial, automotive, and automation applications where reliable and safe serial communication is essential.