zł76.39 tax excl.
PoE M.2 E KEY HAT+ is an add-on board for the Raspberry Pi 5 that enables the connection of M.2 E Key cards with Power over Ethernet (PoE) functionality. Thanks to support for 5 V and 12 V power outputs, dual antenna connectors, and compatibility with popular wireless card standards, the module is well-suited for network projects, IoT applications, and systems requiring stable power supply and high-performance wireless communication.
The PoE M.2 E KEY HAT+ is an expansion HAT for the Raspberry Pi 5 that allows connecting NGFF (M.2 E Key) network modules with Wi-Fi and Bluetooth support. The adapter communicates with the main board via a 16-pin PCIe interface cable and provides power via PoE compliant with IEEE 802.3af/at. The board is equipped with an M.2 E Key slot supporting various A/E Key wireless cards. Two female SMA connectors enable the installation of external antennas, while the USB port allows Bluetooth signal transmission from the wireless module. Additional 5 V (4.5 A) and 12 V (2 A) power outputs can supply external devices. The board includes a standard 40PIN GPIO header for stacking with other HATs.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1262 433/470M LoRaWAN HAT
The PCIe (D) adapter enables the installation of a high-speed M.2 NVMe SSD on the Raspberry Pi 5, offering a significant improvement in read and write speeds compared to microSD cards. It supports system boot from the SSD, making it a suitable solution for performance-demanding projects such as file servers, database systems, or advanced development environments using the Raspberry Pi 5.
RS485 CAN HAT is an extension designed for the Raspberry Pi mini-computer in the form of a HAT overlay. Adds RS485 and CAN interfaces for the Raspberry Pi plate. Interface signals are derived as screw and goldpin connectors. RS485 CAN HAT
HAT designed for Raspberry Pi minicomputers with a two-channel RS232 converter. Communication is realized via the SPI interface. The overlay uses a standard 40-pin Raspberry Pi connector. Waveshare 2-CH RS232 HAT
No product available!
PCIE TO 4-CH NVME Board (B) NP is a PCIe expansion board for Raspberry Pi 5, allowing connection of up to four NVMe drives, improving system performance and enabling SSD boot. With power supply via Pi5 or an external source and support for multiple M.2 formats, it is ideal for expanding storage in projects requiring high speed and reliability. Version without power adapter and power cable, intended for users with their own power infrastructure.
No product available!
4G/3G/2G communication module and GNSS positioning. It allows making phone calls, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP support and GPS, BeiDou, Glonass, LBS support. Waveshare SIM7600G-H 4G HAT
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)
Expansion board with LoRa E22-900T22S module for Raspberry Pi. Allows communication in the 868 MHz frequency band. Waveshare SX1262 868M LoRa HAT
No product available!
HAT with 2-channel CAN converter designed for Raspberry Pi minicomputers. The communication was based on the CAN controller MCP2518FD as well as the MCP2562FD transceiver and SPI interface. Waveshare 2-CH CAN FD HAT
SIM7600E-H 4G HAT is an expansion module for Raspberry Pi for communication via GSM / GPRS cellular networks based on Simcom SIM7600E-H chipset. Waveshare SIM7600E 4G HAT
A 3-port HUB module with a USB 3.2 Gen1 interface with an RJ45 connector designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB Gigabit ETH HAT
Module with an RFID reader designed to work with the Raspberry Pi. Equipped with an OLED display and a buzzer. SB Components 20003
4 Port USB HUB HAT for Raspberry Pi B+, Raspberry Pi 2 B, Rapsberry Pi 3 B; USB to UART Onboard. Waveshare USB HUB HAT
The PCIe To M.2 MINI adapter allows the Raspberry Pi 5 to be expanded with a high-speed NVMe SSD, offering high bandwidth and the ability to boot the system directly from the drive. Its compact form makes the module ideal for projects that require high computing power and fast data access within limited mounting space. It is well-suited for file systems, servers, terminals, and embedded projects using the Raspberry Pi 5.
No product available!
PCIe TO MiniPCIe GbE USB3.2 HAT+ expansion with EG25-G modem provides reliable LTE connectivity, high-speed data transfer via USB 3.2 ports, and efficient wired Ethernet connection. Dedicated for Raspberry Pi 5, it offers a comprehensive communication solution for industrial projects, edge routers, IoT gateways, and positioning applications.
No product available!
The KAmodRPi UART RS485 ISO is an advanced RS485 bus transceiver for the Raspberry Pi, featuring automatic transmission direction control, galvanic isolation, surge protection, and support for up to 128 modules at a transmission speed of up to 500 kbps, powered by 5V with low power consumption
PoE M.2 E KEY HAT+ is an add-on board for the Raspberry Pi 5 that enables the connection of M.2 E Key cards with Power over Ethernet (PoE) functionality. Thanks to support for 5 V and 12 V power outputs, dual antenna connectors, and compatibility with popular wireless card standards, the module is well-suited for network projects, IoT applications, and systems requiring stable power supply and high-performance wireless communication.