.png)
SIM7600E LTE Cat-1 / 3G / 2G GNSS HAT module for Raspberry Pi - Waveshare 17954
ID: 1182353
5902186329591
zł262.83
Tax included
zł213.68 tax excl.
GSM/GNSS expansion module dedicated to Raspberry Pi minicomputers. Allows to equip RPi with LTE Cat-1/3G/2G communication and positioning within GPS, BeiDou, Glonass, GALILEO, QZSS navigation systems. Waveshare SIM7600E LTE Cat-1 HAT
Description
The SIM7600E LTE Cat-1 HAT is a module that extends the capabilities of the Raspberry Pi to communicate over GSM/GPRS cellular networks. It uses Simcom's SIM7600E chip, and with it it is possible to make and receive calls (it is possible to attach a microphone and headphones via a jack socket), send and receive SMS messages, and use wireless Internet. It also has built-in support for positioning within GPS, BeiDou, Glonass, GALILEO, QZSS navigation systems. The module is controlled by AT commands via the UART of the Raspberry Pi computer. It has rich support in the form of libraries for Raspberry Pi, Arduino, STM32.
| 1. SIM7600E | 13.USB-UART |
| 2. CP2102 | 14. MAIN antenna connector |
| 3. Audio decoder NAU8810 | 15. AUX antenna connector |
| 4. Voltage translator 3,3V/5V | 16. GNSS antenna connector |
| 5. MP2128DT | 17. Power switch |
| 6. SPX29302 | 18. GSM indicator |
| 7. GPIO | 19. Power indicator |
| 8. SIM control interface | 20. Voltage jumper |
| 9. SIM socket | 21. UART jumper |
| 10. MicroSD socket | 22. Power jumper |
| 11. Jack 3,5mm | 23. USB pads |
| 12. USB | 24. BOOT |
Features
- Based on the chip: SIM7600E
- Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.
- Supports GNSS positioning (GPS, GLONASS, BeiDou, QZSS).
- Built-in USB interface for testing AT commands, obtaining GPS positioning data
- Connector with derived UART interface to connect to hosts such as Arduino/STM32
- Internal voltage translator, defaults to 3.3V, allows switching to 5V using a 0Ω resistor
- SIM card slot
- 2x LED indicators
- Transmission speed: 300bps ~ 4Mbps
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM extended AT commands)
- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
- 3.5mm jack connector for headset connection
- Frequency band:
- LTE Cat-1: LTE-TDD: B38 / B40 / B41, LTE-FDD: B1 / B3 / B5 / B7 / B8 / B20
- 3G: UMTS / HSPA +: B1 / B5 / B8
- 2G: GSM / GPRS / EDGE: 900 / 1800 MHz
- 16-channels
- Sensitivity: -159 dBm (GPS) / -158 dBm (GLONASS) / -159dBm (BeiDou)
- Cold start: 35 s
- Hot start: 1 s
- SMS: MT, MO, CB, Text, PDU
- Power supply: 5V
- Operating voltage: 5V/3.3V (default is 3.3V)
- Operating temperature: -30~80 ° C
- Dimensions: 56.21 x 65.15 mm
Kit contains
- SIM7600E LTE Cat-1 HAT
- LTE antenna
- External GPS antenna (B)
- 2 x microUSB - USB cable
- Set of mounting spacers (2 pieces)
1182353
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł177.00
Delivery date unknown
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł339.54
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł499.00
24h
Available quantity: 144
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł779.00
24h
Available quantity: 146
Available
Other products in the same category (16)
Dual PCIe 2.0 HAT module for Raspberry Pi 5 supporting NVMe M.2 storage and Hailo8 / Hailo8L AI accelerators. Seeed Studio 103110064
zł82.84
24h
Available quantity: 1
Available
PCIe 3.0 adapter with two M.2 slots designed for Raspberry Pi 5, allowing simultaneous connection of two NVMe SSDs or AI accelerators including Hailo8/8L and Google Coral. The module uses the ASM2806 PCIe switch, supports M.2 2230 / 2242 / 2260 / 2280 devices, and mounts underneath the board while keeping the GPIO header accessible for further expansion. Seeed Studio PCIe3.0 to dual M.2 hat
zł210.35
24h
Available quantity: 6
Available
HAT-type module with a PCIe interface for Raspberry Pi 5, enabling connection of an NVMe M.2 drive or a Hailo8 / Hailo8L AI accelerator. Seeed Studio 103110063
zł38.67
24h
Available quantity: 5
Available
HAT+ module intended for Raspberry Pi 5 enabling power supply via Ethernet in the PoE standard and connection of an M.2 NVMe drive via the PCI Express interface. Waveshare 31536
zł112.07
24h
Available quantity: 3
Available
PCIe TO 2.5G ETH Board (C) designed for Raspberry Pi 5, enabling expansion with a 2.5G Ethernet port. Supports Raspberry Pi OS, operates driver-free, and works in plug and play mode. The RTL8125 controller and PCIe interface ensure straightforward integration and high network throughput. Waveshare PCIe TO 2.5G ETH Board (C)
zł47.36
24h
Available quantity: 2
Available
Multifunctional PCIe to M.2 adapter compatible with Raspberry Pi 5, enabling connection of NVMe M.2 solid state drives and convenient breakout of HDMI ports. Supports dual 4K display outputs, offers two power supply methods, and significantly expands the functionality of Raspberry Pi 5 for desktop and embedded applications. Waveshare Pi5 Connector Adapter (C)
zł43.35
24h
Available quantity: 2
Available
PCIe expansion module for Raspberry Pi 5 with four 2.5G Ethernet RJ45 ports, operating in plug and play mode without driver installation, compatible with Raspberry Pi OS. Waveshare PCIE TO 4-CH 2.5G ETH Board (B)
zł222.70
6 weeks
No product available!
PCIe expansion module for Raspberry Pi 5 with four Gigabit Ethernet RJ45 ports, operating in plug and play mode without driver installation, compatible with Raspberry Pi OS. Waveshare PCIE TO 4-CH Gigabit ETH Board (B)
zł176.52
6 weeks
No product available!
PCIe to M.2 NVMe and USB 3.2 Gen1 adapter designed for Raspberry Pi 5 enabling connection of an NVMe SSD while expanding the system with four USB 3.2 ports. The module supports M.2 NVMe drives in 2230, 2242, 2260 and 2280 sizes and allows booting the system directly from the SSD. The HAT+ compliant design uses the Raspberry Pi 5 PCIe interface to provide high-speed storage and additional USB connectivity. Waveshare PCIe TO M.2 USB HAT+
zł113.33
6 weeks
No product available!
HAT module for Raspberry Pi 5 with PCIe interface for M.2 NVMe drives and PCM5122 audio chip with 3.5 mm jack and RCA output. Supports 2230/2242 SSD and I2S audio without drivers. Waveshare 34170
zł65.49
24h
Available quantity: 5
Available
The module enables micro:bit, Raspberry Pi Pico, RP2040-based boards, and other controllers to connect to Wi-Fi networks and online services. Communication with the host board is handled through UART, while the pre-installed ESP-AT firmware allows network functions to be controlled using AT commands. Cytron GRV-WIFI-8266
zł39.95
24h
Available quantity: 10
Available
The cellular modem adds 2G, 3G, and 4G LTE connectivity to compatible Raspberry Pi computers. The HAT+ form factor, 40-pin connector, USB interface, and cellular modem functions support integration with embedded and communication systems. Teltonika EBD021
zł154.37
2 weeks
No product available!
The cellular modem adds 3G, 4G, and 5G connectivity to Raspberry Pi 4 Model B and Raspberry Pi 5. The HAT+ form factor, 40-pin GPIO connector, USB data interface, and modem control signals support integration with embedded systems requiring direct cellular network access. Teltonika EBD050
zł1,131.22
24h
Available quantity: 1
Available
The cellular modem adds 4G LTE and 5G RedCap connectivity to Raspberry Pi 4 Model B and Raspberry Pi 5. The HAT+ form factor, 40-pin connector, USB interface, and GPIO modem control support integration with embedded systems requiring direct cellular network access. Teltonika EBD070
zł705.55
24h
Available quantity: 1
Available
Compact adapter designed for connecting Qwiic modules and sensors to Raspberry Pi via the I2C bus. It features 3 Qwiic connectors, a female header matching the Raspberry Pi pinout, and additional 3.3 V, 5 V, and GND pins. Soldered 333019
zł7.11
Delivery date unknown
No product available!
CAN communication module with an MCP2518FD controller and ATA6563 transceiver, designed for connecting microcontrollers to CAN buses used in automotive, automation, and industrial systems. It supports CAN 2.0B and CAN FD, an SPI interface, data rates up to 8 Mbps, and a 120 Ω termination resistor enabled via a jumper. Soldered 333020
zł74.44
24h
Available quantity: 2
Available
GSM/GNSS expansion module dedicated to Raspberry Pi minicomputers. Allows to equip RPi with LTE Cat-1/3G/2G communication and positioning within GPS, BeiDou, Glonass, GALILEO, QZSS navigation systems. Waveshare SIM7600E LTE Cat-1 HAT