zł1,110.47 tax excl.
The cellular modem adds 3G, 4G, and 5G connectivity to Raspberry Pi 4 Model B and Raspberry Pi 5. The HAT+ form factor, 40-pin GPIO connector, USB data interface, and modem control signals support integration with embedded systems requiring direct cellular network access. Teltonika EBD050
Teltonika EBD050 belongs to the CALYX family and uses a full 5G modem in the Raspberry Pi HAT+ form factor. The module is intended for Raspberry Pi 4 Model B and Raspberry Pi 5 and provides 3G, 4G LTE, and 5G connectivity. Data communication with the host can be handled through Ethernet over USB using RNDIS or ECM, while USB serial ports provide access to AT commands.
The 40-pin connector provides power and modem control signals, including PWR_KEY and modem reset functions. The module can be integrated with embedded systems that require cellular communication without using an external standalone router. The operating temperature range extends from -40°C to +75°C.
Roof-mount LTE MIMO antenna designed for use with compatible Teltonika Networks routers and devices. It supports frequency ranges of 698-960 MHz and 1710-2690 MHz, while two 3 m RG174 cables are terminated with SMA Male connectors. The housing has an IP65 ingress protection rating, excluding the cable outlet, and is UV resistant. Teltonika PR1KCL25
GSM/GNSS expansion module dedicated to Raspberry Pi minicomputers. Allows to equip RPi with LTE Cat-1/3G/2G communication and positioning within GPS, BeiDou, Glonass, GALILEO, QZSS navigation systems. Waveshare SIM7600E LTE Cat-1 HAT
NFC reader module dedicated to the Raspberry Pi. It is based on the PN532 operating in the 13.56 MHz frequency range. Waveshare PN532 NFC HAT
No product available!
Expansion board with LoRa E22-900T22S module for Raspberry Pi. Allows communication in the 868 MHz frequency band. Waveshare SX1262 868M LoRa HAT
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1268 433M LoRa HAT
No product available!
A two-channel RS485 expansion module designed for the Raspberry Pi. It uses the TP75176E transceiver and CH432T chip and offers a stable connection between devices. DFRobot DFR0824
The EM060K-GL LTE Cat-6 module kit is designed for use with the Raspberry Pi minicomputer. It supports communication over the high-speed LTE-A network and GNSS positioning. Waveshare EM060K-GL LTE Cat-6 HAT
The Quectel 5G RM520N-GL module kit is designed for use with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare RM520N-GL 5G HAT (with case) (EU)
No product available!
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
No product available!
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT
No product available!
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare SX1262 868/915M LoRaWAN HAT
The KAmodRPi UART RS485 ISO is an advanced RS485 bus transceiver for the Raspberry Pi, featuring automatic transmission direction control, galvanic isolation, surge protection, and support for up to 128 modules at a transmission speed of up to 500 kbps, powered by 5V with low power consumption
Board with the NB-IoT SIM7028 module intended for Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7028-NB-IoT HAT (EN)
BTT U2C V2.1 is a versatile CAN Bus adapter, ideal for integration with Raspberry Pi. With ESD protection, a durable PCB surface, and support for firmware updates, it is a reliable solution for stable communication in 3D printing projects. BIGTREETECH U2C V2.1
No product available!
The KAmodRPi5 PCIe-M.2 adapter allows you to easily connect an NVME SSD to a Raspberry Pi 5 computer, ensuring universal installation, communication via the PCI Express interface, stable power supply voltage and LED indicators, while maintaining compatibility with HAT modules and official cooling
PCIe to M.2 adapter that allows you to connect M.2 NVMe SSD drives to Raspberry Pi 5 minicomputers. It works with M.2 SSD drives of sizes 2230/2242 and connects to the minicomputer via a 16-pin PCIe ribbon. Waveshare PCIe TO M.2 HAT+
UART debugger module designed specifically for Raspberry Pi 5. Allows easy connection to UART debug connector via SH1.0 3PIN cable, ensuring convenient and effective debugging. Waveshare Pi UART Debugger
No product available!
The cellular modem adds 3G, 4G, and 5G connectivity to Raspberry Pi 4 Model B and Raspberry Pi 5. The HAT+ form factor, 40-pin GPIO connector, USB data interface, and modem control signals support integration with embedded systems requiring direct cellular network access. Teltonika EBD050