TTGO T-Beam V1.2 - IoT development board with ESP32 and LoRa 433MHz module
ID: 574132
5906623456727
zł245.39
Tax included
zł199.50 tax excl.
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 433 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.2
Description
A development board designed for IoT projects, equipped with a WiFi/Bluetooth ESP32 module with a 3D antenna and a LoRa communication module operating at 433 MHz. In addition, the board has GPS NEO-6M with a positioning accuracy of up to 3 m. On the bottom of the board there is a basket for a Li-Ion type 18650 battery, which is managed by a circuit with the TP5400 system, which allows you to charge the batteries with a current of up to 1 A. This selection of components and small dimensions make the board ideally suited to the design of devices in the area of the Internet of Things.
Features
- ESP32
- WiFi and Bluetooth communication
- 4 MB Flash
- 4 MB PSRAM
- Antenna
- LoRa
- Frequency band: 433 MHz
- Transmit power: + 20dbm
- Reception sensitivity:
- 139dBm @ LoRa and 62.5Khz and SF = 12 and 146bps
- 136dBm @ LoRa and 125Khz and SF = 12 and 293bps
- 118dBm @ LoRa and 125Khz and SF = 6 and 9380bps
- 123dBm @ FSK and 5Khz and 1.2kb / s
- FIFO 64 B
- Data transfer rate: 1.2K ~ 300kb/s @ FSK, 0.018K ~ 37.5kb/s @ LoRa
- Modulation Mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK
- Interface: SPI
- Automatic frequency correction
- Automatic gain control
- Operating voltage: 1.8 to 3.7V
- Current consumption: up to 120 mA
- GPS NEO-6M
- Interface: UART (baudrate 9600)
- Receiving band: L1 (1575.42MHz)
- Positioning accuracy: 3 m
- Drift: <0.02 m/s
- Reference system: WGS-84
- Maximum altitude: 18,000 m
- Maximum speed: 515 m/s
- Acceleration: <4g
- Tracking sensitivity: -161 dBm
- Acquisition sensitivity: -148 dBm
- Average "cold start" time: 38 seconds
- Average "warm start" time 35 seconds
- Hotstart time: 1 sec
- Average recovery time: 0.1 seconds
- Ceramic antenna
- Working voltage: 3 to 5V
- Li-Ion 1 A battery charging circuit
- Charging status LEDs
- MicroUSB connector
Kit contains
- TTGO T-Beam V1.2 module
- 433 MHz antenna
- 2 x straight goldpin 13-pin connector
574132
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Development kit with ESP32 WiFi and Bluetooth module and 0.96 "OLED display. It has a built-in Li-Pol charger module and a USB-UART converter function. ModOLEDESP32_V2.0_TTGO
zł90.49
24h
Available quantity: 10
Available
Li-Ion battery type 18650 with a nominal voltage of 3.7 V and a capacity of 2500 mAh. Samsung INR18650-25R
zł23.99
24h
Available quantity: 55
Available
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 868 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.1
zł255.85
Delivery date unknown
No product available!
Other products in the same category (16)
The SenseCAP M2 Multi-Platform LoRaWAN Indoor Gateway is a universal LoRaWAN® gateway supporting network servers such as AWS, TTN and ChirpStack, operating in the 865-923 MHz (EU868) bands. It offers a range of up to 10 km and stable data transmission, ideal for applications in smart buildings, environmental monitoring and precision agriculture. Seeed Studio 114992981
zł469.00
4 weeks
No product available!
The expansion board with the LoRa E22-400T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. SB Components 21642
zł262.49
24h
Available quantity: 1
Available
IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. There is a Grove connector on the board. Seeed Studio 113020091
zł94.33
24h
Available quantity: 4
Available
Wio-WM1302 LoRaWAN Gateway Module (SPI) US915-M Seeed Studio 114992969 is a mini-PCIe format module based on the SX1302 chip, designed for building LoRaWAN gateways in the US915 band. Thanks to its low power consumption, high sensitivity, and SPI interface, it is well suited for IoT and M2M applications requiring reliable long-range communication.
zł124.86
4 weeks
No product available!
LoRa module with RP2040 microcontroller. It uses the SX1262 chip, ensuring reliable long-distance communication in the frequency range from 850 to 930 MHz. Included with a USB Type-C adapter. Waveshare RP2040-LoRa-HF-Kit
zł57.07
24h
Available quantity: 1
Available
Open source USB dongle that allows you to work with the LoRa network. It allows you to communicate with a range of up to 5 km and has a built-in 1.14-inch LCD display. SB Components 23004
zł212.21
24h
Available quantity: 2
Available
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1262 433/470M LoRaWAN HAT
zł68.25
24h
Available quantity: 3
Available
LoRa radio module with 433 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0116
zł230.50
24h
Available quantity: 1
Available
A comprehensive development kit for creating mobile and energy-efficient LoRa® devices with GPS support and environmental sensors. The kit includes a development board with nRF52840 and Semtech LR1110, an Air530 GPS module and a 0.96” OLED display, ready to work with Meshtastic software. With support for Bluetooth 5.3, Zigbee, Thread and four Grove connectors, the kit offers extensive expansion possibilities and full freedom to design independent communication and location systems. Seeed Studio E24070201
zł193.49
4 weeks
No product available!
LoRaWAN node module based on the RP2040 chip and the LR1262 radio module, enabling communication in the 868 MHz band. It supports point-to-point (LoRa P2P) transmission and LoRaWAN networks, making it ideal for IoT projects. Equipped with Crowtail connectors, a battery charging interface, and the ability to be powered by a solar panel, it allows for the creation of autonomous and energy-efficient field devices. Compatibility with Arduino and MicroPython facilitates rapid prototyping and application development. Elecrow LR1262 Node Board LoRaWan Node
zł80.18
24h
Available quantity: 3
Available
Development kit with SAMD21G18A microcontroller with ARM Cortex M0+ core and LoRa RFM95W radio communication module. SparkFun WRL-15836
zł164.81
24h
Available quantity: 1
Available
IoT development board with STM32WLE5JC chip that connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. It has all the pins of the LoRa-E5 module and an external antenna. Seeed Studio 113990939
zł111.91
24h
Available quantity: 8
Available
LoRa module working on the 868 MHz frequency band with built-in RP2040 microcontroller, CH340 USB to UART converter, 74HC125V voltage level converter. SB Components 23240
zł362.46
24h
Available quantity: 1
Available
Radio module with 868 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0115
zł228.76
24h
Available quantity: 2
Available
Solar-powered communication node integrating LoRa modules and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel, which makes it ideal for field work. Thanks to its long range (up to 8-9 km) and the possibility of expansion via Grove interface, P1 will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993643
zł379.84
4 weeks
No product available!
STM32 Nucleo starter pack for LoRa technology. It consists of two development kits: NUCLEO-L073RZ and NUCLEO-F746ZG and expansion modules for communication within LoRa: LRWAN_NS1 and LRWAN_GS_LF1. STMicroelectronics P-NUCLEO-LRWAN3
zł506.86
1 weeks
No product available!
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 433 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.2