zł32.81 tax excl.
Multi-band Wio-LR2021 RF transceiver module based on the Semtech LR2021 chip, designed for wireless communication in the 863-928 MHz Sub-GHz and 2.4 GHz ISM bands. Supports LoRa, FLRC, (G)FSK, (G)MSK, 4-FSK, O-QPSK, and LR-FHSS modulation schemes, enabling data transmission at up to 2.6 Mbps in FLRC mode. Offers receiver sensitivity down to -141.1 dBm, transmit power up to +22 dBm, and current consumption of 583 nA in deep sleep mode. Equipped with an SPI interface and 22 SMT terminals, it operates with a supply voltage of 1.8 V to 3.7 V. Designed for IoT devices, LPWAN networks, telemetry systems, and tracking applications. Tape Reel version for surface mounting. Seeed Studio 100058045
The Seeed Studio Wio-LR2021 wireless module enables data transmission and reception in the 863 MHz to 928 MHz Sub-GHz band and the 2.4 GHz ISM band. It uses the Semtech LR2021 transceiver, supporting LoRa, FLRC, (G)FSK, (G)MSK, 4-FSK, O-QPSK, and LR-FHSS modulation schemes. LoRa technology provides long-range communication with low power consumption, while FLRC modulation enables data rates of up to 2.6 Mbps. The module offers receiver sensitivity down to -141.1 dBm at Sub-GHz frequencies and transmit power up to +22 dBm. It is suitable for telemetry systems, wireless sensor networks, industrial automation, smart agriculture, and IoT devices requiring communication across multiple radio frequency bands.
The Semtech LR2021 chip features a Switchless Direct-Tie RF architecture, reducing the need for external RF switches. The module supports the physical layer of protocols used in LoRaWAN, Bluetooth LE 5.0, Thread, Zigbee, Wi-SUN, and Wireless M-BUS systems. Implementing the corresponding communication protocol stacks requires an external microcontroller. The transceiver is controlled through an SPI interface, while DIO pins provide interrupt handling and additional control functions. Current consumption is 583 nA in deep sleep mode and 960 µA in idle mode, making the module suitable for battery-powered devices.
The compact SMT design measuring 17.07 x 10.42 x 2.8 mm enables direct integration of the transceiver onto a custom printed circuit board. The module provides 22 terminals, including an SPI interface, RESET and BUSY control lines, and separate RF terminals for the Sub-GHz and 2.4 GHz bands. It operates with a supply voltage of 1.8 V to 3.7 V. The Tape Reel version is designed for automated surface-mount assembly during electronics manufacturing. The manufacturer provides technical documentation, reference schematics, mechanical models, and design libraries for integrating the module into custom devices.
Manufacturer
Responsible person
These add-ons for any Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x\'s). These radios are good options for kilometer-range radio, and paired with one of our WiFi, cellular or Bluetooth Feathers, will let you bridge from 433/900 MHz to the Internet or your mobile device. Adafruit 3232
Cap for use with shallow Feather series, with radio module RFM95W 900MHz. It offers a range of up to 2 kilometers (the range can be increased by using an external antenna). It has a SPI interface. Adafruit 3231
Module with LoRa transmitter based on RFM95 (SX1276 LoRa®). It works with a frequency of 433 MHz, maximum power up to 100 mW and a power gain of up to + 20dBm. The module has a built-in antenna, but it is possible to connect an external antenna (MHF connector). The module has a connector in accordance with the Grove standard. Seeed studio 113060007
The module with the SX127x 433 MHz system for LoRa communication, designed for FireBeetle boards. It communicates via the SPI interface. DFRobot TEL0121
No product available!
Radio module with operating frequency of 433 MHz. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.3 to 5 V. DFRobot TEL0114
LoRa MESH Radio Module is a radio module with an operating frequency of 868MHz. Communication with the module takes place via the UART serial interface. It has a range up to 3km. It is supplied with voltage in the range of 3.3-5V. DFRobot TEL0117
LoRa radio module with 433 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0116
Radio module with 868 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0115
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 433 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.2
No product available!
Module with the SX1276 868 MHz system for LoRa communication, designed for FireBeetle boards. It communicates via the SPI interface. DFRobot TEL0125
HAT module with RFM95W 868 MHz system for LoRa/LoRaWAN communication and OLED display, designed for Raspberry Pi minicomputers. Adafruit 4074
STM32 Nucleo starter pack for LoRa technology. It consists of two development kits: NUCLEO-L073RZ and NUCLEO-F746ZG and expansion modules for communication within LoRa: LRWAN_NS1 and LRWAN_GS_LF1. STMicroelectronics P-NUCLEO-LRWAN3
No product available!
Shield with RFM95W 915 MHz system for LoRa/LoRaWAN communication, designed for Arduino boards. SHIELD-LORA-RFM Citron
Development kit with SAMD21G18A microcontroller with ARM Cortex M0+ core and LoRa RFM95W radio communication module. SparkFun WRL-15836
Development board with LoRa Semtech SX1262 module and Apollo 3 Bluetooth 5 integrated in the NM180100 chip. It supports the 868 MHz and 915 MHz bands and Bluetooth Low Energy. It is compatible with the Qwicc system. SparkFun 17506
No product available!
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 868 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.1
No product available!
Multi-band Wio-LR2021 RF transceiver module based on the Semtech LR2021 chip, designed for wireless communication in the 863-928 MHz Sub-GHz and 2.4 GHz ISM bands. Supports LoRa, FLRC, (G)FSK, (G)MSK, 4-FSK, O-QPSK, and LR-FHSS modulation schemes, enabling data transmission at up to 2.6 Mbps in FLRC mode. Offers receiver sensitivity down to -141.1 dBm, transmit power up to +22 dBm, and current consumption of 583 nA in deep sleep mode. Equipped with an SPI interface and 22 SMT terminals, it operates with a supply voltage of 1.8 V to 3.7 V. Designed for IoT devices, LPWAN networks, telemetry systems, and tracking applications. Tape Reel version for surface mounting. Seeed Studio 100058045