zł205.97 tax excl.
LoRa MESH Radio Module is a radio module with an operating frequency of 868MHz. Communication with the module takes place via the UART serial interface. It has a range up to 3km. It is supplied with voltage in the range of 3.3-5V. DFRobot TEL0117
LoRa MESH Radio Module is a radio module with 868 MHz operating frequency. It is supplied with voltage in the range of 3.3-5 V. Communication with the module takes place via the UART serial interface. The LoRa MESH module is a high-performance, energy-saving RF module with a long-range, using a distributed network communication mode. The module supports API mode, transparent mode and AT command mode - the user can configure the PC software or send AT commands by the microcontroller. The module has a range of up to 2-3 km in open space and power up to 100 mW. It also has built-in high-performance coding techniques with error correction and frequency hopping mechanism. The module will be used in projects requiring, for example, remote control of mobile robots.
Manufacturer
Responsible person
Adafruit Feather HUZZAH ESP8266 is a new development board from Adafruit with a built-in WiFi module ESP8266. Processor frequency: 80 MHz, USB-serial TTL CP2104 converter, Li-Pol battery charger. Adafruit 2821
Bluetooth Low Energy, 2.4GHz spectrum wireless protocol. Excellent for use in portable projects that will make use of an iOS or Android phone or tablet. It also is supported in Mac OS X and Windows 8+. Adafruit 2829
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip. Adafruit 3179
These add-ons for any Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x\'s). These radios are good options for kilometer-range radio, and paired with one of our WiFi, cellular or Bluetooth Feathers, will let you bridge from 433/900 MHz to the Internet or your mobile device. Adafruit 3232
An industrial IoT locator designed for long-term asset monitoring in indoor and outdoor environments. It utilizes LoRaWAN communication and GNSS positioning, while a built-in solar panel and 4000 mAh battery ensure near-maintenance-free operation over extended periods. Its rugged IP67 housing and resistance to harsh environmental conditions enable use in the field, logistics, and construction industries. Seeed Studio 100087298
An industrial LoRaWAN asset tracker designed for long-term asset monitoring, both indoors and outdoors. Equipped with an 8000 mAh battery and an IP67 enclosure, it offers over a year of maintenance-free operation in harsh environments. Precise GNSS, BLE, and Wi-Fi positioning, along with anti-tamper features, ensure security and tracking accuracy. SeeedStudio 100057727
No product available!
An industrial LoRaWAN asset tracker designed for long-term asset monitoring, both indoors and outdoors. Equipped with an 8000 mAh battery and an IP67 enclosure, it offers over a year of maintenance-free operation in harsh environments. Precise GNSS and BLE positioning, along with anti-tamper features, ensure security and tracking accuracy. Seeed Studio 100082900
No product available!
An evaluation kit for rapid prototyping of IoT devices with long range and high data rates. It supports sub-GHz and 2.4 GHz bands and various modulation schemes, including LoRa and FLRC, reaching speeds of up to 2.6 Mbps. The kit is compatible with Arduino Uno, STM32 Nucleo, and Nordic DK platforms and features an OLED display and Grove connectors for connecting sensors. Seeed Studio 100039980
No product available!
An IoT platform based on the nRF52840 chip and the Semtech LR1121 transceiver, enabling LoRa and LoRaWAN communication in the 868/915 MHz and 2.4 GHz bands. The module offers high receiver sensitivity of up to -141 dBm, enabling communication distances of up to approximately 15 km. Support for multiple interfaces, such as GPIO, ADC, I2C, and UART, and compatibility with the Crowtail ecosystem, enables easy integration with sensors and rapid prototyping. Elecrow LMM15121D
A multi-functional device combining a 7000 mAh power bank with LoRa communication based on the Meshtastic protocol, enabling the creation of a decentralized mesh network without internet access. Equipped with a Semtech LR1110 module, an nRF52840 microcontroller, and built-in GPS supporting multiple navigation systems, it allows for messaging and real-time location sharing. It offers fast charging up to 22.5W, PD, QC, and PPS support, and MagSafe-compatible wireless charging. Elecrow LMM14004D1
No product available!
A wireless communication module designed for IoT systems and applications requiring long-range data transmission. Based on the Semtech SX1262 chip, it supports LoRa, (G)FSK, and GMSK modulations in the 850–930 MHz band, offering a maximum transmit power of 22 dBm and very high receiver sensitivity of up to -148 dBm. With a link budget of up to 170 dB, it enables communication over distances of typically 6–7 km, and up to approximately 15 km under favorable conditions. The module communicates with a microcontroller via an SPI interface, features very low power consumption in sleep mode (1.62 µA), and a compact size of 10 x 10 mm, facilitating integration in embedded devices and battery-powered systems. Elecrow CIL13262L
A wireless communication module designed for IoT systems and applications requiring long-range transmission. Based on the Semtech LLCC68 chip, it supports LoRa and (G)FSK modulations in the 850–930 MHz band, offering a maximum transmit power of 22 dBm and a receiver sensitivity of up to -129 dBm. With a link budget of up to 151 dB, it enables communication over distances of up to 5–6 km, and even up to 10 km under favorable conditions. The module communicates with a microcontroller via an SPI interface, features very low power consumption in sleep mode (1.62 µA), and has a compact size of 10 x 10 mm, facilitating integration in embedded devices. Elecrow CIL13368L
ThinkNode M2 Meshtastic (LoRa) enables long-range communication using LoRa technology and Meshtastic firmware. The device is equipped with an ESP32-S3 microcontroller, an SX1262 LoRa module, a 1.3-inch OLED display with 128 × 64 px resolution, 2.4 GHz WiFi, Bluetooth 5.0 Low Energy, and a USB Type-C connector. The transceiver is compatible with the Meshtastic App, also supports MeshCore firmware, and is suitable for emergency communications, mesh networking, and IoT applications. Elecrow ThinkNode M2 Meshtastic (LoRa)
Multi-protocol wireless communication module combining the Nordic nRF52840 microcontroller with the Semtech LR1110 transceiver. Supports LoRa / LoRaWAN in the 850 MHz to 930 MHz band, Bluetooth Low Energy, Thread, Zigbee and NFC, as well as GNSS and WiFi-based positioning functions. Offers up to +21 dBm transmit power, sensitivity down to -141 dBm and a communication range exceeding 10 km under suitable conditions. Elecrow CIL13510X
8-channel LoRaWAN concentrator module based on the Semtech SX1302 chipset with an SPI interface, designed for building IoT gateways. Operates in the US915 frequency band (902-928MHz), supports 125, 250 and 500kHz channel bandwidths, and provides receiver sensitivity down to -139dBm and transmit power up to 25dBm. Equipped with a 52-pin mini-PCIe connector and two U.FL antenna connectors. Radio transmission within the EU is subject to restrictions under applicable national regulations. Elecrow CRT01266M003
Wireless communication module for IoT devices combining a dual-core ESP32-S3R8 microcontroller with an SX1262 LoRa transceiver; supports LoRaWAN in EU868 and US915 bands, 2.4 GHz WiFi and Bluetooth LE 5.0; 16 MB Flash and 8 MB PSRAM; LoRa output power up to 20.9 dBm; sensitivity down to -137 dBm; IPEX antenna connector; 3.0-3.6 V supply voltage; 38-pin SMT package; dimensions 21.6 x 16.5 x 3.3 mm. Seeed Studio 100020327
Multi-band Wio-LR2021 RF transceiver module based on the Semtech LR2021 chip, designed for wireless communication in the 863-928 MHz Sub-GHz and 2.4 GHz ISM bands. Supports LoRa, FLRC, (G)FSK, (G)MSK, 4-FSK, O-QPSK, and LR-FHSS modulation schemes, enabling data transmission at up to 2.6 Mbps in FLRC mode. Offers receiver sensitivity down to -141.1 dBm, transmit power up to +22 dBm, and current consumption of 583 nA in deep sleep mode. Equipped with an SPI interface and 22 SMT terminals, it operates with a supply voltage of 1.8 V to 3.7 V. Designed for IoT devices, LPWAN networks, telemetry systems, and tracking applications. Tape Reel version for surface mounting. Seeed Studio 100058045
No product available!
Portable development device based on the ESP32-S3 microcontroller combines an SX1262 868 MHz LoRa transceiver, a 2.8" IPS color display, a full QWERTY keyboard, and a trackball controller in a compact enclosure. Factory-installed LILYGO Factory Firmware allows immediate use without manually flashing the base firmware. The package includes an 868 MHz LoRa FPC antenna, a power cable, and a 1×6 pin header. The device is designed for LoRa communication terminals, portable messaging devices, IoT projects, and custom applications based on the ESP32-S3 microcontroller. LILYGO TTGO T-Deck 868 MHz Black LILYGO Factory Firmware
No product available!
Portable LoRa device based on the nRF52840 microcontroller combines an SX1262 868 MHz LoRa transceiver, a 1.54" E-Paper display, an L76K GNSS positioning module, and a BME280 environmental sensor in a compact ABS enclosure with a built-in 850 mAh battery. Factory-installed Meshtastic firmware allows immediate deployment in mesh networks without manually flashing the software. The kit includes an 868 MHz LoRa antenna and a USB Type-C cable. The device is designed for autonomous mesh nodes, long-range communication, GPS positioning, and mobile IoT applications. LILYGO TTGO T-Echo 868 MHz BME280 Meshtastic Firmware
No product available!
A development board based on the ESP32 microcontroller that combines an SX1278 LoRa transceiver, a 0.96" OLED display, and a microSD card slot in a single compact design. Preloaded with Disaster-Radio firmware, it supports Wi-Fi, Bluetooth 4.2, and 433 MHz LoRa communication. The kit includes a 433 MHz LoRa antenna, a JST 2-pin power cable, and pin headers for soldering. The board is designed for autonomous communication devices, mesh network nodes, and IoT applications. LILYGO TTGO T3 LoRa32 V1.6.1 Disaster-Radio 433 MHz
No product available!
LoRa MESH Radio Module is a radio module with an operating frequency of 868MHz. Communication with the module takes place via the UART serial interface. It has a range up to 3km. It is supplied with voltage in the range of 3.3-5V. DFRobot TEL0117