Adafruit Feather HUZZAH with WiFi module ESP8266
ID: 560910
5906623429011
zł90.18
Tax included
zł73.32 tax excl.
Adafruit Feather HUZZAH ESP8266 is a new development board from Adafruit with a built-in WiFi module ESP8266. Processor frequency: 80 MHz, USB-serial TTL CP2104 converter, Li-Pol battery charger. Adafruit 2821
Descritpion
Adafruit Feather HUZZAH ESP8266 is a new development board from Adafruit with a built-in WiFi module ESP8266.
The heart of the board is the ESP8266 module with a microcontroller clocked at 80 MHz and logic working in the voltage range from 0 to 3.3 V. The programming of the board is extremely simple thanks to the Arduino IDE environment providing a quick start of projects related to IoT technology. On the board there is a USB converter module - Serial TTL, CP2104 providing the ability to quickly load the code and communications with a speed of 921600 baud.
On PCB used the connector of a single-purpose battery Li-Pol with voltage of 3,7V for easier use in portable applications. The built-in charging system ensures charging by connecting via a USB connector.
Features
- Based on ESP8266 system, 80 MHz
- 4MB FLASH memory
- Built-in WiFi module 802.11 b / g / n
- Built-in voltage regulator 3.3V, 500mA
- Built-in converter USB-serial TTL based on CP2104 USB phone
- The ability to transmit data from 921600 bps
- Autoreset function after uploading the firmware
- 9 GPIO pins,/li>
- 1 analog input
- Built-in Li-Pol charger with a charging current up to 100mA with LEDs for charging status indication
- Two diode for signaling the system operation
- Work volatage / logic: 3,3V
- Dismension: 51 x 23 x 8 mm
- Weight: 9,7g
560910
Data sheet
- Microcontroller
- ESP8266
- Flash memory
- 4 MB
- Number of I/O
- 09
- Ethernet
- none
- WiFi/BT module
- Yes
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 51mm
- Width
- 23 mm
- USB connector type
- microUSB type B
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Adafruit Feather HUZZAH ESP8266 is a new development board from Adafruit with a built-in WiFi module ESP8266. Processor frequency: 80 MHz, USB-serial TTL CP2104 converter, Li-Pol battery charger. Adafruit 2821
zł90.18
24h
Available quantity: 1
Available
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic. 256K FLASH, 32K RAM, built in USB and battery charging. Adafruit 2772
zł116.17
24h
Available quantity: 1
Available
Bluetooth Low Energy, 2.4GHz spectrum wireless protocol. Excellent for use in portable projects that will make use of an iOS or Android phone or tablet. It also is supported in Mac OS X and Windows 8+. Adafruit 2829
zł176.59
24h
Available quantity: 2
Available
Other products in the same category (16)
Development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The module also has an RFM69HCW chip that allows wireless communication in the 433 MHz band. Adafruit 3177
zł147.12
4 weeks
No product available!
The board is equipped with ATSAME51 microcontroller (ARM Cortex-M core) with CAN bus and SPI Flash memory, GPIO pins and a connector for connecting the battery with the charging circuit. Adafruit 4759
zł143.34
24h
Available quantity: 3
Available
Module with WiFi Espressif ESP32-S2. It integrates two 3.3 V stabilizers, SPI Flash memory, LiPo charging circuit, light sensor and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4769
zł183.63
24h
Available quantity: 1
Available
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. Adafruit 3405
zł117.08
24h
Available quantity: 1
Available
Module with WiFi Espressif ESP32-S2. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5000
zł87.88
24h
Available quantity: 1
Available
Development board with ESP8266 microcontroller with built-in Wi-Fi communication. The system is clocked at 80 MHz and powered by 3.3 V. It includes a Tensillica core and a full Wi-Fi stack. Adafruit 3046
zł111.73
24h
Available quantity: 2
Available
Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500 is a development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The board also has an ATWINC1500 module that provides WiFi connectivity. Adafruit 3061
zł206.07
4 weeks
No product available!
Development kit with nRF52840 microcontroller with ARM Cortex M4F core and BLE communication. Equipped with motion sensors, magnetometer, light, humidity, pressure sensors and a microphone. Adafruit 4516
zł245.41
4 weeks
No product available!
At the Feather 32u4\'s heart is ATmega32u4 clocked at 8 MHz and at 3.3V logic. This chip has 32K of flash and 2K of RAM, with built in USB so not only does it have a USB-to-Serial program & debug capability built in with no need for an FTDI-like chip, it can also act like a mouse, keyboard, USB MIDI device, etc. Adafruit 2795
zł143.57
24h
Available quantity: 1
Available
Module with WiFi and BLE Espressif ESP32-S3 system and LCD TFT display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5483
zł155.03
24h
Available quantity: 4
Available
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5477
zł90.95
24h
Available quantity: 3
Available
A compact development board with a built-in 1.14" IPS display, ideal for user interfaces, IoT projects, and case-mounted devices. Featuring the ESP32-S3 with Wi-Fi, Bluetooth LE, and native USB, it offers 4MB of Flash and 2MB of PSRAM to support more advanced graphics and networking applications. Three user buttons, a STEMMA QT connector, and an integrated LiPo charger provide convenient prototyping and expansion capabilities. Adafruit 6303
zł125.84
24h
Available quantity: 1
Available
Board with RP2040 microcontroller and HDMI video connector. Has a built-in LiPo charging circuit and STEMMA QT connector. Allows the use of the Feather module to display data on a monitor. Adafruit 5710
zł85.77
24h
Available quantity: 4
Available
Adafruit Feather nRF52840 Express is an advanced development board with Bluetooth LE and native USB, perfect for mobile and portable applications. With ample memory, support for CircuitPython and Arduino IDE, and numerous interfaces, it is an excellent tool for creating advanced projects. Adafruit 4062
zł150.29
4 weeks
No product available!
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic. 256K FLASH, 32K RAM, built in USB and battery charging. Adafruit 2772
zł116.17
24h
Available quantity: 1
Available
This compact ESP8266-based development board is ideal for IoT projects requiring 802.11 b/g/n Wi-Fi connectivity. It features a built-in CP2104 USB-to-UART converter with auto-reset, 4MB of Flash memory, and 9 GPIO pins with I2C and SPI support. The board also includes a LiPo battery header, a 100mA charger, and pre-soldered connectors for quick prototyping. Adafruit 3213
zł100.61
24h
Available quantity: 1
Available
Adafruit Feather HUZZAH ESP8266 is a new development board from Adafruit with a built-in WiFi module ESP8266. Processor frequency: 80 MHz, USB-serial TTL CP2104 converter, Li-Pol battery charger. Adafruit 2821