- New
zł96.75 tax excl.
8-channel LoRaWAN concentrator module based on the Semtech SX1302 chipset with an SPI interface, designed for building IoT gateways. Operates in the US915 frequency band (902-928MHz), supports 125, 250 and 500kHz channel bandwidths, and provides receiver sensitivity down to -139dBm and transmit power up to 25dBm. Equipped with a 52-pin mini-PCIe connector and two U.FL antenna connectors. Radio transmission within the EU is subject to restrictions under applicable national regulations. Elecrow CRT01266M003
The Elecrow LR1302 LoRaWAN Gateway US915 concentrator module uses the Semtech SX1302 baseband chipset and an SX1250 RF transceiver. It supports 8 LoRaWAN channels, enabling the development of network gateways that receive data from distributed IoT devices and forward messages to LoRaWAN networks. The module is suitable for telemetry systems, environmental monitoring, industrial automation, precision agriculture and smart installations.
The module operates in the 902-928MHz (US915) frequency range and supports channel bandwidths of 125, 250 and 500kHz. Receiver sensitivity reaches -125dBm at SF7 and -139dBm at SF12, with a bandwidth of 125kHz. Maximum transmit power for the US915 version is 25dBm with a 3.3V power supply. The module supports Listen Before Talk (LBT), a mechanism used to detect radio activity before initiating transmission.
Communication with the host device takes place through an SPI interface. The board uses a mini-PCIe form factor with a 52-pin edge connector, allowing integration with a compatible gateway carrier board. The mini-PCIe form factor defines the module's physical design and mounting arrangement, while data communication uses SPI rather than the PCI Express bus. The board measures 30 × 50.95mm.

The module features two U.FL (IPEX) antenna connectors for LoRa radio paths, including a transmit/receive path and a separate transmit path. A metal shield helps reduce the impact of electromagnetic interference on the electronic components. The board also includes LEDs indicating power, configuration status, transmission and reception activity.
The module requires a 3.3V power supply. In the SPI version, current consumption is approximately 7.5mA in standby mode, 40mA during reception and up to 415mA during transmission. The operating temperature range extends from -40 to 85°C, supporting integration into communication equipment for industrial installations and remote monitoring systems.
Warning!
The module operates in the US915 frequency plan, covering the 902-928MHz range. US915 frequency plan does not comply with the conditions applicable to LoRaWAN network operation in Poland and other European Union countries. Radio equipment may only operate within permitted frequency ranges.
Manufacturer
Responsible person
IoT development board with STM32WLE5JC chip that connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. It has all the pins of the LoRa-E5 module and an external antenna. Seeed Studio 113990939
IoT development kit with STM32WLE5JC chip that connects microcontroller with ARM Cortex-M4 core and LoRa SX126X module. It has all the pins of the LoRa-E5 module, I2C, SPI, UART, RS485 interfaces and an external antenna. Seeed Studio 113990934
LoRa radio module with 433 MHz operating frequency. Communication takes place via the SPI serial interface. It is supplied with the voltage of 3.3 V
The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare Pico-LoRa-SX1262-868M
Function module designed for MicroMod boards. It allows you to add LoRa and LoRaWAN wireless communication in the 915 MHz frequency band to the project. SparkFun DEV-18573
No product available!
Core1262-HF is an advanced LoRa module operating in the 850–930 MHz band, combining high energy efficiency, strong transmission power, and interference resistance. With support for LoRa/LoRaWAN standards and available development resources, it is ideal for use in industrial automation, smart home systems, and Sub-GHz IoT projects.
No product available!
The expansion board with the LoRa E22-400T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. SB Components 21642
The expansion board with the LoRa E22-900T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and enables communication in the 868 MHz frequency band. SB Components 21628
No product available!
The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare Pico-LoRa-SX1262-433M
Open source USB dongle that allows you to work with the LoRa network. It allows you to communicate with a range of up to 5 km and has a built-in 1.14-inch LCD display. SB Components 23004
Open source USB dongle that allows you to work with the LoRa network. It allows you to communicate with a range of up to 5 km and has a built-in 1.14-inch LCD display. SB Components 23011
LoRa module operating at 433 MHz frequency band with built-in RP2040 microcontroller, CH340 USB to UART converter, 74HC125V voltage level converter. SB Components 23233
Expansion board with LoRaWAN SX1303 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1303 868M LoRaWAN Gateway HAT
No product available!
Expansion board with LoRaWAN SX1302 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1302 868M LoRaWAN Gateway HAT
LoRaWAN SX1303 module is equipped with a Mini-PCIe connector. It uses the SPI or I2C interface for communication. Waveshare SX1303 868M LoRaWAN Gateway (B)
No product available!
The LoRaWAN SX1302 module is equipped with a Mini-PCIe connector. It uses the SPI or I2C interface for communication. Waveshare SX1302 868M LoRaWAN Gateway (B)
8-channel LoRaWAN concentrator module based on the Semtech SX1302 chipset with an SPI interface, designed for building IoT gateways. Operates in the US915 frequency band (902-928MHz), supports 125, 250 and 500kHz channel bandwidths, and provides receiver sensitivity down to -139dBm and transmit power up to 25dBm. Equipped with a 52-pin mini-PCIe connector and two U.FL antenna connectors. Radio transmission within the EU is subject to restrictions under applicable national regulations. Elecrow CRT01266M003