LoRa MESH Radio Module - 433MHz radio module

LoRa module based on Semtech SX1262 chip, supporting 868/915 MHz band and providing stable operation thanks to the use of TCXO. It is characterized by transmit power up to 22 dBm, receiver sensitivity -136.73 dBm and low power consumption, which makes it ideal for battery-powered IoT devices. Seeed Studio 114993390

M5Stack U111-B is an evaluation board with SIM7020G module, which supports NB-IoT and LTE Cat-NB communication, ideal for IoT applications requiring low power consumption. With support for TCP/IP, UDP and MQTT protocols and wide frequency range, the module provides reliable connectivity in different regions and remote monitoring applications

The expansion board with the LoRa E22-900T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and enables communication in the 868 MHz frequency band. SB Components 21628

Expansion board with LoRaWAN SX1303 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1303 868M LoRaWAN Gateway HAT

Adafruit Feather 32u4 RFM95 is a development board with built-in ATmega32u4 AVR microcontroller (8MHz, 32kB Flash, 2kB RAM) and RFM95W module enabling wireless communication in the 868 MHz or 915 MHz band. The board is compatible with Arduino IDE. Adafruit 3078

DFRobot DFR1115-868 module based on the SX1262 enables stable long-range wireless communication in IoT networks, supporting LoRa and LoRaWAN. It operates in the EU868 band, offering low power consumption, full compatibility with popular platforms, and easy integration through I2C/UART interfaces. It is well-suited for agricultural, environmental, and educational applications.

A compact ESP32-S3-based LoRa transceiver offering stable field communication without the need for a cellular network. The device comes pre-installed with Meshtastic, a 1.3" OLED display, and an SX1262 transceiver supporting the EU868 MHz band. A built-in 1000 mAh battery ensures long battery life, while Bluetooth and USB-C support simplify setup and everyday use. The Elecrow ThinkNode M2 ​​Walkie-Talkie Mini

Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 433 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.2

LoRa module operating at 433 MHz frequency band with built-in RP2040 microcontroller, CH340 USB to UART converter, 74HC125V voltage level converter. SB Components 23233

LoRa RF transceiver module operating in the ISM band below 1GHz, featuring a UART interface and built-in antenna, used for long-range wireless data transmission. REYAX RYLR998

Compact and energy-efficient solution combining Bluetooth 5.0 and LoRa (862–930 MHz), ideal for IoT projects requiring long range and low power consumption. It uses the XIAO nRF52840 MCU with Cortex-M4 core and support for multiple interfaces and the LoRa SX1262 module for reliable wireless communication. The kit is perfect for applications such as Meshtastic, asset tracking, sensor networks or educational projects. Seeed Studio 102010710

Versatile ESP32 module with LoRa and Wi-Fi support, designed for monitoring people flow and creating mesh networks in difficult conditions, such as in areas cut off from the network. The device can detect Wi-Fi and Bluetooth signals, allowing estimation of the number of mobile devices in the environment without recording MAC addresses, which protects privacy. The module offers low power consumption, data storage on SD card and data transfer via LoRa WAN or MQTT, making it a reliable and self-sufficient solution for emergency communication. modTTGO LoRa32 v2.1

Crowtail-LoRa RA-08H is an energy-efficient LoRaWAN communication module with the ASR6601 chip, enabling data transmission up to 1 km in the 803–930 MHz band. Ideal for IoT projects, automation and remote monitoring systems requiring long battery-powered operation.

At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip. Adafruit 3179

Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare SX1262 868/915M LoRaWAN HAT

Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT