DFRobot UART-USB FTDI FT232RL converter

BOB-13263

USB - UART converter based on the PL2303 chip. Compatible with voltages of 1.8 V, 2.5 V, 3.3 V and 5 V, it is equipped with a USB type C connector. Waveshare PL2303 USB UART Board (Type C)

KAmod RS232H-ALL is a RS232 to TTL signal converter, supporting all RS232 interface signals, based on the MAX3243/SP3243 system, with a TTL side voltage of 3-5.5 V, a maximum transmission speed of 250 kbps, ESD protection up to 15kV HBM, a standard DB9 connector, a Phoenix MC 3.81 connector and 2.54 mm goldpin pins, with a board size of 65x30 mm (72x30 mm with a DB9 connector

Xbee USB adapter based on the FTDI chip. Intended for configuring Xbee modules. Thanks to the female goldpin connector, it can be used as an FTDI programmer for Arduino FIO / pro / mini / lilypad. DFRobot DFR0050

USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. DFRobot DFR0174

Converter dedicated to industrial applications. It provides communication between the USB interface and the RS232 and RS485 serial standard

KAmod USB-UART-mini is a compact USB-C to UART converter, based on the FT230XS chip, enabling communication at speeds from 300 bps to 3 Mbps and providing the option of mounting using an additional front panel; includes LED indicators, supports signal voltages of 3.3 V, optionally 5 V, and offers support for Windows, Linux and Mac

The base plate is dedicated to ESP32 CAM modules. It allows you to connect the camera via a USB interface, e.g. to a computer. ESP32-CAM-MB

Converter dedicated to industrial applications. It provides communication between the USB interface and the RS422 and RS485 serial standard

The module with the UART-RS232 converter is designed to work with the Raspberry Pi Pico. It has a built-in SP3232EEN chip and enables data transmission between the UART interface and the RS232 device. Waveshare Pico-2CH-RS232

USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, it is equipped with a microUSB connector. Cytron UC00A

USB - UART converter based on the PL2303 chip. Compatible with voltages of 1.8 V, 2.5 V, 3.3 V and 5 V, it is equipped with a USB type A connector. Waveshare PL2303 USB UART Board (type A) V2

FTDI basic breakout Arduino USB-TTL ASP, RoHS

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets. Adafruit 954

Industrial grade USB-UART TTL converter. Equipped with a number of security features ensuring stable and safe communication. Waveshare USB TO TTL (B)