KAmod USB-UART-mini - Miniature USB-UART converter
ID: 1190298
5906623433421
zł31.89
Tax included
zł25.93 tax excl.
KAmod USB-UART-mini is a compact USB-C to UART converter, based on the FT230XS chip, enabling communication at speeds from 300 bps to 3 Mbps and providing the option of mounting using an additional front panel; includes LED indicators, supports signal voltages of 3.3 V, optionally 5 V, and offers support for Windows, Linux and Mac
Description
KAmod USB-UART-mini is a USB-C interface to UART serial interface converter with small dimensions - only 20.5x10.5 mm. The module is based on the FT230XS system and has only basic signal lines - RX and TX, which operate with a voltage of 3.3 V. Additionally, the module contains communication indicators in the form of miniature LEDs. Optionally, the converter can be equipped with a front panel that allows easy and aesthetic installation of the module on almost any wall in the housing.
Features
- The converter is based on the FT230XS type FTDI system
- Compatible with USB 2.0 Full Speed
- Drivers for Windows/Linux/Mac
- On the USB interface side, it includes a USB-C connector
- It contains only the basic signal lines of the UART interface - RX and TX
- Output 5 V power supplied from the USB connector
- The voltage level for serial interface signals is 3.3 V (tolerates 5 V at the input)
- Optionally, the voltage level for the serial interface signals can be set to 5 V
- Communication speed (bit rate): 300 bps...3 Mbps
- LEDs indicating communication
- Small board dimensions 20.5x10.5 mm, height approx. 7 mm
- Optionally, it can be equipped with a front panel that allows easy and aesthetic installation of the module on almost any wall in the housing.
Included
- Assembled and launched module
- Front panel (to be soldered)
- Straight goldpin male connector (for soldering)
- Angled goldpin male connector (for soldering)
1190298
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Overlay module for Raspberry Pi with GSM, GPRS, GNSS and Bluetooth
zł124.62
24h
Available quantity: 7
Available
Xbee USB adapter based on the FTDI chip. Intended for configuring Xbee modules. Thanks to the female goldpin connector, it can be used as an FTDI programmer for Arduino FIO / pro / mini / lilypad. DFRobot DFR0050
zł81.45
24h
Available quantity: 2
Available
The UART-USB converter built on the FTDI FT232RL chip. Compatible with 3.3V and 5V voltages. DFRobot DFR0065
zł54.51
24h
Available quantity: 2
Available
USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, it is equipped with a microUSB connector. Cytron UC00A
zł38.92
24h
Available quantity: 1
Available
USB - UART TTL converter based on the FT232RL chip, the module is equipped with a miniUSB socket. Works with 3.3V or 5V voltage levels.
zł14.58
24h
Available quantity: 11
Available
USB port isolator based on the ADUM3160 chip. The device has a rated insulation voltage of 1500V. The isolator is powered from the USB port.
zł70.37
4 weeks
No product available!
A small USB-UART TTL converter module based on the CH340 system with a USB type A connector. Designed for the ESP-01 and ESP-01S modules
zł5.29
24h
Available quantity: 9
Available
UART-RS232 converter module. The board was equipped with a Grove and DB9 connector. Seeed Studio 103020192
zł38.38
24h
Available quantity: 1
Available
USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. DFRobot DFR0174
zł97.48
24h
Available quantity: 1
Available
RS232 - UART converter module based on the MAX3232 chip. There is a DB9 connector on the board and a 4-pin connector with a 2.54 mm pitch
zł4.51
24h
Available quantity: 8
Available
USB - RS-232 USB A (m) / D-Sub (m) cable with a length of 1 m. Akyga AK-CO-02
zł12.03
24h
Available quantity: 13
Available
The module with the UART-RS232 converter is designed to work with the Raspberry Pi Pico. It has a built-in SP3232EEN chip and enables data transmission between the UART interface and the RS232 device. Waveshare Pico-2CH-RS232
zł24.44
24h
Available quantity: 4
Available
The base plate is dedicated to ESP32 CAM modules. It allows you to connect the camera via a USB interface, e.g. to a computer. ESP32-CAM-MB
zł12.03
24h
Available quantity: 3
Available
A module with a USB converter - GPIO/ADC/I2C based on the MCP2221A chip. It allows you to connect sensors, displays or PWM drivers to the computer via a 2.54 mm or Stemma QT/Qwiic connector. Adafruit 4471
zł36.83
24h
Available quantity: 1
Available
USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, has been equipped with a USB type C connector. Waveshare FT232 USB UART Board (Type C)
zł27.10
24h
Available quantity: 10
Available
USB - UART converter based on the CP2102 chip. Compatible with a voltage of 3.3 V, has been equipped with a USB type C connector. Waveshare CP2102 USB UART Board (Type C)
zł20.34
24h
Available quantity: 22
Available
KAmod USB-UART-mini is a compact USB-C to UART converter, based on the FT230XS chip, enabling communication at speeds from 300 bps to 3 Mbps and providing the option of mounting using an additional front panel; includes LED indicators, supports signal voltages of 3.3 V, optionally 5 V, and offers support for Windows, Linux and Mac