CP2102 USB-UART Converter with Mini USB - Waveshare 8085
ID: 569523
5906623422098
zł20.66
Tax included
zł16.80 tax excl.
CP2102 USB to UART Module, USB mini connector
Overview
The CP2102 USB UART Board (mini) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard.
CP2102 features:
- Single-Chip USB to UART Data Transfer
- No external resistors required, no external crystal required
- On-chip power-on reset circuit and voltage regulator
- Integrated 1024-Byte EEPROM
- USB Function Controller
- USB Specification 2.0 compliant; full-speed (12 Mbps)
- USB suspend states supported via SUSPEND pins
- UART
- All handshaking and modem interface signals
- Data formats supported:
- Data bits: 5, 6, 7, and 8
- Stop bits: 1, 1.5, and 2
- Parity: odd, even, no parity
- Baud rates: 300 bps to 1 Mbits
- 576 Byte receive buffer; 640 byte transmit buffer
- Hardware or X-On/X-Off handshaking supported
- Event character support
- Virtual COM Port Device Drivers
- Windows 8/7/Vista/Server 2003/XP/2000
- MAC OS-X/OS-9
- Linux 2.40 or higher
- USBXpress Direct Driver Support
- Windows 7/Vista/Server 2003/XP/2000
- Windows CE
- Temperature Range
- –40 to +85 °C
Features
- Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/...
- Voltage output support: 5V or 3.3V
- Integrated USB protection device: SP0503
- 3 LEDs: TXD LED, RXD LED, POWER LED
- Pins accessible on pinheaders: TXD, RXD, RTS, CTS
- Other pins are accessible on drilled holes, easily connected to user application system (separate pinheaders are provided)
How to Use
In the case of working with a MCU:
- VCCIO: 3.3V or 5V output (the module is powered from USB, onboard jumper should be shorted to 3.3V or 5V)
- GND: connects to GND
- TXD: connects to MCU.RX (signal direction: MCU.RX << CP2102 << PC.TX)
- RXD: connects to MCU.TX (signal direction: MCU.TX >> CP2102 >> PC.RX)
- RTS: connects to MCU.CTS (signal direction: MCU.CTS << CP2102 << PC.RTS)
- CTS: connects to MCU.RTS (signal direction: MCU.RTS >> CP2102 >> PC.CTS)
Note: VCP examples and USBXpress driver program library are provided.
Package content
Weight: 0.012 kg
- CP2102 USB UART Board (mini) × 1
- 4-pin male pinheader & 4-pin female pinheader × 2
- 6-pin custom connector jumper wire × 1
569523
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
CP2102 USB to UART Module, USB micro connector
zł19.54
24h
Available quantity: 11
Available
CP2102 USB to UART Module, USB type A connector
zł18.59
24h
Available quantity: 9
Available
Other products in the same category (16)
A small USB-UART TTL converter module based on the CH340E chip with a microUSB connector
zł8.66
24h
Available quantity: 22
Available
KAmod RS232H-mini is a miniature RS232 to TTL converter, operating in the voltage range of 3-5.5 V, supporting all RS232 signals, with a male DB9 connector, 2.54 mm goldpin pins, based on the MAX3243/SP3243 system, offering ESD protection up to 15 kV and a signal conversion direction corresponding to a DTE/Host device
zł21.19
24h
Available quantity: 137
Available
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets. Adafruit 954
zł55.52
24h
Available quantity: 5
Available
KAmod RS232S-mini is a miniature RS232 to TTL converter with a female DB9 connector, 2.54 mm goldpin pins, operating at 3-5.5 V, supporting all RS232 signals, based on the MAX3238/SP3238 chip, offering ESD protection up to 15 kV and corresponding to a DCE/Modem device
zł34.30
24h
Available quantity: 184
Available
CP2102 USB to UART Module, USB micro connector
zł19.54
24h
Available quantity: 11
Available
Available
UART - USB converter based on the FT232RL chip with TX, RX, RTS and CTS lines led out to the pin connector, the remaining lines available on solder fields for pin connectors. Micro-USB socket. Voltage supply from 3.3 to 5 V. FT232 USB UART Board (micro)
zł29.63
24h
Available quantity: 49
Available
USB-TTL converter with USB type A, micro USB and USB type C connectors. Enables communication between the UART serial interface and the USB interface. SB Components 24780
zł22.61
24h
Available quantity: 3
Available
The KAmod USB HID module with the CH9350 chip enables reliable extension of USB HID signals via UART transmission, offering stable connections over long distances. With built-in protection features, advanced LED indicators, and full system compatibility, the device is ideal for industrial applications, embedded systems, and advanced control setups using standard HID devices.
zł77.90
24h
Available quantity: 98
Available
USB-UART TTL converter based on the CH343G chip. Equipped with a number of security features ensuring stable and safe communication. Waveshare CH343 USB UART Board (micro)
zł17.33
24h
Available quantity: 2
Available
Easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH; works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers; uses the CH340G IC to quickly and easily convert serial signals to USB. DEV-14050
zł51.66
24h
Available quantity: 2
Available
The KAmodRS module is a reliable RS232-UART converter supporting voltages from 3 V to 5.5 V and enabling data transmission at a speed of up to 250 kbit/s. Thanks to the use of the MAX3232 chip, the module is ideal for a wide range of electronic and microcontroller applications requiring stable and effective serial communication
zł15.99
24h
Available quantity: 120
Available
USB - RS232/RS485 converter with the original FT2132RNL chip. It uses a USB type A connector and a screw connector to connect RS232 and RS485 interfaces. Supports a wide range of operating systems: Mac, Linux, Android and Windows 11, 10, 8.1, 8, 7. Waveshare USB TO RS232/485
zł51.72
24h
Available quantity: 87
Available
USB - UART converter based on the CH9102F chip. Compatible with the voltage of 3.3 V and 5 V, it has been equipped with a USB type C connector. Adafruit 5568
zł25.66
4 weeks
No product available!
USB - RS232 adapter equipped with a USB type A connector and an RS232 connector in the DB9 female standard. It uses the original FTDI FT232RL chip, which guarantees a reliable connection between a variety of devices. Waveshare USB-TO-RS232-Female-Cable
zł46.16
24h
Available quantity: 14
Available
USB - UART converter based on the PL2303 chip
zł9.00
24h
Available quantity: 43
Available
CP2102 USB to UART Module, USB mini connector