zł61.12 tax excl.
RS232 - UART converter based on the MAX3238 chip. It uses all lines of the RS232 interface, thanks to which the user has all the standard's functionalities at his disposal. Pololu 126
RS232 - UART converter based on the MAX3238 chip. It uses all lines of the RS232 interface, thanks to which the user has at his disposal all the functionalities of the standard, such as RTS, CTS, DTR and DSR lines. The board has a DB9 connector and a goldpin list with a pitch of 2.54 mm compatible, among others. with contact plates.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
RS-232 D-Sub (f) / D-Sub (m) cable, 2 m long. Akyga AK-CO-01
RS-232 D-Sub (m) / D-Sub (m) cable 2 m long, uncrossed. Akyga AK-CO-03
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
USB - RS232 adapter equipped with a USB type A connector and an RS232 connector in the DB9 male standard. It uses the original FTDI FT232RL chip, which guarantees a reliable connection between a variety of devices. Waveshare USB-TO-RS232-Male-Cable
ZL5USB is a USB-UART converter module based on Silabs CP2102. The module has small sizes, microUSB connector and it can works with the 2.5...5.5V signals.
USB-UART converter for Odroid minicomputers. It is based on the CP2102N chip and is equipped with a USB type C connector
USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi, RoHS
USB - UART converter based on the PL2303 chip
KAmod RS232H-ALL is a RS232 to TTL signal converter, supporting all RS232 interface signals, based on the MAX3243/SP3243 system, with a TTL side voltage of 3-5.5 V, a maximum transmission speed of 250 kbps, ESD protection up to 15kV HBM, a standard DB9 connector, a Phoenix MC 3.81 connector and 2.54 mm goldpin pins, with a board size of 65x30 mm (72x30 mm with a DB9 connector
CP2102 USB to UART Module, USB micro connector
USB - RS-232 USB A (m) / D-Sub (m) cable with a length of 1 m. Akyga AK-CO-02
USB-TO-TTL-FT232 is a reliable USB-to-UART converter designed for applications requiring a compact module with safe and fast serial communication. It is well-suited for microcontroller programming, UART port diagnostics, and powering devices in embedded systems. With high system compatibility and full logic-level isolation, it is an ideal tool for electronics designers and system integrators.
The module allows you to send UART (TTL) bus signals to a computer via a USB port. The adapter operates based on the PL2303HX chip and is recognized in the computer as a virtual serial port
USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. DFRobot DFR0174
USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, it is equipped with a microUSB connector. Cytron UC00A
USB TO UART solution with USB Type A connector
No product available!
RS232 - UART converter based on the MAX3238 chip. It uses all lines of the RS232 interface, thanks to which the user has all the standard's functionalities at his disposal. Pololu 126