USB-UART converter PL2303 with USB-C connector - Waveshare 20645

Easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH; works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers; uses the CH340G IC to quickly and easily convert serial signals to USB. DEV-14050

The module with the UART-RS232 converter is designed to work with the Raspberry Pi Pico. It has a built-in SP3232EEN chip and enables data transmission between the UART interface and the RS232 device. Waveshare Pico-2CH-RS232

USB - UART converter based on the CH9102F chip. Compatible with the voltage of 3.3 V and 5 V, it has been equipped with a USB type C connector. Adafruit 5568

The Adafruit CH9328 UART to HID Keyboard Breakout allows for easy and fast emulation of a HID keyboard without the need for a microcontroller with native USB. The module is used in prototyping projects, automation, integration with single-board computers and in testing devices where keyboard signals are required. Thanks to support for various transmission modes and simplicity of integration, it is a practical tool for electronics engineers and embedded system programmers. Adafruit 5973

KAmod RS232S-ALL is a 3-5.5V RS232 to TTL converter supporting all RS232 signals, offering standard DB9 and Phoenix MC 3.81 connectors and 2.54mm goldpins, based on the MAX3238/SP3238 and providing ESD protection up to 15kV

USB - UART converter based on the PL2303 chip

USBRS232 interface with galvanic isolation

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets. Adafruit 954

USB TO UART solution with USB Type A connector

KAmod RS232H-ALL is a RS232 to TTL signal converter, supporting all RS232 interface signals, based on the MAX3243/SP3243 system, with a TTL side voltage of 3-5.5 V, a maximum transmission speed of 250 kbps, ESD protection up to 15kV HBM, a standard DB9 connector, a Phoenix MC 3.81 connector and 2.54 mm goldpin pins, with a board size of 65x30 mm (72x30 mm with a DB9 connector

ZL5USB is a USB-UART converter module based on Silabs CP2102. The module has small sizes, microUSB connector and it can works with the 2.5...5.5V signals.

USB - UART TTL converter based on the FT232RL chip, the module is equipped with a miniUSB socket. Works with 3.3V or 5V voltage levels.

USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi, RoHS

UART converter - USB based on the FT232RL system with TX, RX, RTS and CTS lines led out to the goldpin female connector. It uses a mini USB connector. Adafruit 284

USB-TO-TTL-FT232 is a reliable USB-to-UART converter designed for applications requiring a compact module with safe and fast serial communication. It is well-suited for microcontroller programming, UART port diagnostics, and powering devices in embedded systems. With high system compatibility and full logic-level isolation, it is an ideal tool for electronics designers and system integrators.