

UART-RS232 converter module. It is based on the MAX3232 chip and enables communication, for example, with a computer via the DB9 connector. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the UART interface and is supplied with the voltage of 3.3 V or 5 V. It can be used in industrial applications. Full documentation with examples of use is available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
UART-RS485 converter module. The board was equipped with a Grove connector. Seeed Studio 103020193
No product available!
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
Module with a 3-axis ADXL356B accelerometer with a measuring range up to ± 20g. The board is equipped with a Grove connector and communicates via the analog interface. Seeed Studio 101020637
Module allowing collision / vibration detection (based on the MVS0608.02 system). Permitted to detect collisions irrespective of direction, provides high stability and is highly sensitive. The module has a connector in accordance with the Grove standard. Seeed studio 101020005
Module with an electric charge (Coulomb) meter LTC2941. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020593
No product available!
Module with a 2-channel inductive sensor LDC1612. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020599
Module with humidity and air temperature sensor based on the AM2302 system. It allows temperature measurement in the range from -40 to 80 ° C and the humidity measurement takes place in the range of 5 to 99% RH. The module has a connector in accordance with the Grove standard. Seeed Studio 101020019
Set for speech recognition compatible with Arduino. It consists of the Base Shield V2 expansion module, the voice command recognition module, the audio module and the necessary accessories. Seeed Studio 110020108
Module with SHT31 temperature and humidity sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020212
Module with a magnetic sensor based on the CT10 reed switch. CT10 is a unipolar reed switch, normally open. The sensor reacts to the action of an electromagnet, permanent magnet or a combination thereof. The module has a connector in accordance with the Grove standard. Seeedstudio 101020038
Module with a slide potentiometer. Depending on the position of the slider, the resistance value (maximum resistance 10kΩ) changes, which translates into the voltage value at the analog output of the module. The module has a connector in accordance with the Grove standard. Seeed studio 101020036
Module with 10 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020131
3-port I2C splitter module. The board is equipped with Grove connectors and allows you to connect additional I2C devices. Seeed Studio 103020006
Module with 2-element 14-segment display with red backlight. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 104020132
Module with a TDS sensor that allows you to measure the total content of solids dissolved in water. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020753
No product available!
Module with an incremental encoder with a rotation range of 360°. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020001
Module with a dust sensor PPD42NS. The board is equipped with a Grove cable and communicates via the PWM interface. Seeed Studio 101020012
No product available!
Module with relay SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and is controlled via digital input. Seeed Studio 103020137
No product available!
UART-RS232 converter module. The board was equipped with a Grove and DB9 connector. Seeed Studio 103020192