Grove 3-Axis Digital Accelerometer - module with a 3-axis BMA400 accelerometer
ID: 583173
5906623416424
zł49.72
Tax included
zł40.42 tax excl.
Module with a 3-axis BMA400 accelerometer with a measuring range up to ± 16g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020582
Description
Module with a 3-axis accelerometer BMA400 with adjustable measuring range ± 2g, ± 4g, ± 8g or ± 16g. The system is characterized by low energy consumption and uses a built-in 12-bit ADC converter, which ensures good resolution of the measurements. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the I2C interface and is supplied with a voltage of 3.3 V or 5 V. It is perfect for projects related to the area of robotics and flying objects, and as a step counter. Full documentation with examples of use is available on the product page.
Features
- 3-axis accelerometer with digital output
- Measuring range: ± 2g, ± 4g, ± 8g or ± 16g
- Sensitivity: 1024LSB/g @±2g / 512LSB/g @±4g / 256LSB/g @±8g / 128LSB/g @±16g
- 12-bit ADC converter
- Built-in another FIFO
- Interrupt output
- I2C interface
- I2C address: 0x14 or 0x15 (default)
- Supply voltage: 3.3 V or 5 V
- Current consumption: 18 uA
- Dimensions: 40 x 20 mm
Kit contains
- Grove 3-Axis Digital Accelerometer
- Grove cable
583173
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 106
Available
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
Regular pricezł207.92zł188.92
24h
Available quantity: 52
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 6
Available
Module with the LIS3DHTR 3-axis accelerometer. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 114020121
zł24.06
24h
Available quantity: 2
Available
Module with a 3-axis BMA400 accelerometer with a measuring range up to ± 16g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020582
zł49.72
24h
Available quantity: 3
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
Other products in the same category (16)
The expansion module is designed for Wio Lite tiles and compatible with Adafruit Feather. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020252
Regular pricezł30.81zł23.74
24h
Available quantity: 10
Available
Module with LoRa transmitter based on RFM95 (SX1276 LoRa®). It works with a frequency of 433 MHz, maximum power up to 100 mW and a power gain of up to + 20dBm. The module has a built-in antenna, but it is possible to connect an external antenna (MHF connector). The module has a connector in accordance with the Grove standard. Seeed studio 113060007
zł84.92
24h
Available quantity: 1
Available
Base plate designed for NodeMCU (ESP8266 WIFI). The module is an expansion board that allows you to plug the NodeMCU into the slot and use the Grove sensor ports. Seeed Studio 105020008
zł57.18
24h
Available quantity: 4
Available
Module with the SLA-05VDC-SL-C relay with a maximum load of 30 A. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 103020012
zł52.19
24h
Available quantity: 1
Available
Expansion module with Qwiic connectors. The board is equipped with a Grove connector and allows communication via the I2C interface. Seeed Studio 103020292
zł19.38
4 weeks
No product available!
Grove starter kit dedicated to Raspberry Pi minicomputers. Contains basic sensors and modules necessary for learning programming and electronics. Seeed Studio 110020169
zł261.47
24h
Available quantity: 1
Available
Set (5 pieces) of wires for attaching modeling servos with the Grove system. With one wire you can connect 2 servos to one Grove slot. Seeed studio 110990057
zł30.73
24h
Available quantity: 1
Available
Module with SSR M281 relay with a load of up to 1 A. The board is equipped with a Grove connector and is controlled by a digital input. Seeed Studio 101020603
zł31.92
24h
Available quantity: 3
Available
Module with SHT31 temperature and humidity sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020212
zł52.95
24h
Available quantity: 2
Available
Module with LCD display 16x2 characters with black text and red backlight. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 104020112
zł30.31
24h
Available quantity: 4
Available
Module with a 3-axis MMA7660FC accelerometer with a measuring range up to ± 1.5g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020039
zł64.13
24h
Available quantity: 3
Available
Module with OTP-538U non-contact temperature sensor. The board is equipped with a Grove connector and has analog outputs. Seeed Studio 101020062
zł63.41
24h
Available quantity: 3
Available
4-core cable with a length of 15 cm, terminated on one end with a Grove plug, and on the other with a male goldpin connector. Seeed Studio 110990210
zł9.21
24h
Available quantity: 5
Available
Vertical Grove socket for through-hole mounting, 4-pin, pitch 2.0 mm. Set of 10 pieces. Seeed Studio 110990030
zł4.86
4 weeks
No product available!
Transceiver module equipped with SoC ESP8285 IoT enabling communication with WiFi networks. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 113020011
zł71.75
24h
Available quantity: 1
Available
Module with a button and yellow LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020045
zł12.46
24h
Available quantity: 1
Available
Module with a 3-axis BMA400 accelerometer with a measuring range up to ± 16g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020582